Polanik S16-508 User manual

Instruction manual
School and training throwing circle
S16-508
File: 2016-10-26
PRODUCT SUPPORT
Agnieszka Szymczyk-Bystrońska
[e-mail]

Instruction manual S16-508 2/4
Warning!
The product sensitive to impacts –handle with care!
Read this manual carefully before assembly and installation.
I. Use
The throwing circle is designed for installing in the foundation of the discus throwing facility.
The producer reserves the right to introduce without warning changes in product constructions and colours.
II. Technical specification
Code
S16-508
Inside dia. [mm]
2135
Weight [kg]
23,6
Number of seg. [pcs]
4
Construction
deisgned to assembly in cencrete
foundations fundamencie at
school and training objects. Basic
parts made of galvanized steel .
screwed with bolts, inside coated
with white paint designed for zinc
layer, light construction
[mm]

Instruction manual S16-508 3/4
III. Assembly
Warning!
The product sensitive to impacts –handle with care!
The circle segments are to be screwed together using the included bolts.
Do not roll the assembled circle, it must be transported carefully to the place of the installation!
IV. Installation in concrete foundation
The assembled circle is to be embedded in the concrete foundation approx. 30 cm thick, made of concrete class C20/25,
and approximate diameter 2,9 m.

Instruction manual S16-508 4/4
V. Operation and maintenance
The circle surface and the surrounding area should be kept clean and protected against humidity, sand and dirt using a
special cover PC16-S0512 (available separately).
IV. Packing
Parts of the circle are wrapped with foil and fastening to the pallet
surface inside the circle
circle rim
target field surface
concrete
[mm]