Polarlite 1558362 User manual

Outdoors
Operating instructions
Intended use
Use this product to decorate interior and exterior spaces (IP44).
For safety and approval purposes , you must not rebuild and/or
modify this product. If you use the product for purposes other
than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short-circuiting,
fire, electric shock etc. Read the instructions carefully and keep
them for future reference. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European
requirements. All company names and product names are
trademarks of their respective owners. All rights reserved.
Delivery content
Safety instructions
Read the operating instructions carefully and especially
observe the safety information. If you do not follow the
safety instructions and information on proper handling
in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and
pets.
• Do not leave packaging material lying around carelessly. These
may become dangerous playing material for children.
• The product must not be connected electrically with other light
chains or decorations.
• Decorative fairy lights
•
Transformer
• Operating instructions
• Always check the product for damages before use. Should you
discover any damage, cease use of the product. If you discover
damages while the product is in use (i.e. damaged transformer),
do not touch the product, risk of fatal injury due to electric
shock! First remove the power outlet to which the product
is connected from the power supply (flip o the fuse and/or
automatic circuit breaker and then turn o the residual current
operated circuit breaker to disconnect the power outlet at all
phases). Now unplug the transformer from the power outlet.
Discontinue use of the product immediately, dispose of it in an
environmentally friendly fashion.
• Protect the product from extreme temperatures, strong jolts,
flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it
out of operation and protect it from any accidental use. Safe
operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient
conditions or
– has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even
from a low height can damage the product.
• The lights become hot during operation. Keep the product away
from highly combustible materials while operating.
• The mains outlet must be located near to the device and be
easily accessible.
• As power supply, only use the supplied transformer.
• Only connect the transformer to a normal mains socket
connected to the public supply. Before plugging in the
transformer, check whether the voltage stated on the
transformer complies with the voltage of your electricity
supplier.
• Never connect or disconnect transformers if your hands are
wet.
• Never unplug the transformer from the mains socket by pulling
on the cable; always use the grips on the plug.
• When setting up the product, make sure that the cable is not
pinched, kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become
entangled in them. This poses a risk of injury.
• For safety reasons, disconnect the transformer from the mains
socket during storms.
• This product is designed to be used indoors and outdoors.
• Attention, LED light:
– Do not look directly into the LED light!
– Do not look into the beam directly or with optical instruments!
• Never use the product immediately after it has been brought
from a cold room into a warm one. The condensation generated
could destroy the product. The plug-in power supply unit also
involves danger to life by electric shock! Allow the product to
reach room temperature before connecting it to the power
supply and putting it to use. This may take several hours.
• This product’s flexible power supply cord cannot be exchanged
or repaired. If the cord is damaged, the product must be
disposed of.
• Carefully separate the individual strands on the chain. Never pull
on the LEDs, as this may damage the lights.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or
connection of the device.
• Maintenance, modifications and repairs are to be performed
exclusively by an expert or at a qualified shop.
• If you have questions which remain unanswered by these
operating instructions, contact our technical support service or
other technical personnel.
Decorative fairy
lights
LED mini fairy lights,
cold white LEDs
Item no. 1558362
LED mini fairy lights,
warm white LEDs
Item no. 1558363

The product has no power switch and is always on as long as
it is connected to the power supply.
Care and cleaning
• Disconnect the transformer from the power supply before
cleaning and allow the LEDs to cool down suciently.
• To clean, use a clean, dry, lint-free cloth. For stubborn dirt,
slightly dampen the cloth with water.
• Allow the product to dry completely before continued use.
Disposal
Electronic devices are recyclable waste and must not
be disposed of in the household waste. At the end of its
service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the
protection of the environment.
Product overview
Operation
Do not set up or operate the product under water.
Make sure that the cables hang loosely and are not
stretched too tightly. Failure to heed this warning may
cause the cables to tear.
Do not connect the product to the power supply while
it is still in the packaging. Lay the product out entirely
before connecting it to the power supply.
Do not hang any objects from the product and do not
cover the product.
The LEDs are non-dimmable and non-replaceable.
1. Carefully spread the product so that it is not bundled
together.
2. Hang the product on the desired surface (e.g. top of a
Christmas tree) using the loop.
3. Separate the individual strands as desired.
4. Connect the plug to the correct connector on the
transformer.
5. Secure the connection by turning the plug‘s screw cap onto
the transformer‘s thread.
6. Connect the transformer to a power outlet.
7. The LEDs will turn on when the chain is connected to the
mains.
8. Disconnect the transformer from the power outlet for
extended periods of disuse.
2 m
5 m
2 m
5 m
Technical data
a) Decorative fairy lights
Item No. 1558362 1558363
Protection type IP44
Operating voltage 6 V/DC
Power consumption max. 2.4 W
Number of lights 200
Luminous colour Cool White Warm White
Power cable length 5 m
Distance between
lights 10 cm
Operating conditions -20 to +40 °C
Storage conditions -20 to +40 °C
Weight 170 g
b) Transformer GP-SW060DC1000-IP44(EU)
Protection type IP44
Input voltage 100 - 240 V/AC, 50/60 Hz
Output voltage 6 V/DC
Output current 1000 mA
Output power max. 6 W
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. These operating instructions
represent the technical status at the time of printing.
© Copyright 2017 by CEI Conrad Electronic International (HK) Limited
1558362_3_V2_0817_02_LS_m_EN
distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau