Polycom EagleEye Director II Assembly instructions

Polycom®EagleEye™Director IICamera System Quick Tips
3725-69436-001A | June 2017
The Polycom®EagleEye™Director II camera system
is the next version of the Polycom EagleEye Director
camera system.
This automatic camera positioning system provides
accurate close-up views of the person speaking. The
EagleEye Director II camera system also provides
smoothtransitionsbetweentheclosespeakerandthe
group view.
Indicator Lights
Indicator lights display when the EagleEye Director II
camera system is powered on.
Disable Camera Tracking
Disable camera tracking to stop the camera from
automatically tracking the people who are speaking.
You can disable camera tracking for a call using the
remote control.
»Press or ontheremotecontroltodisable
camera tracking.
After you disable camera tracking, you can manually
control the camera position using the remote control.
Adjust the Camera
You can make adjustments to Polycom cameras to
enhance the view of meeting participants using the
remote control with the Polycom EagleEye Director II
camera system.
»Press and ontheremote
control to pan, tilt and zoom the left EagleEye
IV camera.
Number Description
Blue Power on, EagleEye Director II camera
system is in active state
Blinking Blue Receive IR, EagleEye Director II camera
system boot up
Fast Blinking
Blue Power on, System is being initialized, Adjust Analytics camera status
Amber Standby/Asleep
Alternate
Amber and
Blue
Software update, factory restore, USB
image update
Blinking
Amber USB plugged in
Green In a call
Blinking
Green Receive IR in a call
Fast Blinking
Red Camera system error
Note: Before you adjust the EagleEye
Director II camera system, you must
disable camera tracking.
Number Description

Enable Camera Tracking
Enable camera tracking to allow the EagleEye
Director II camera system to automatically focus on
the people who are speaking. The EagleEye Director
II camera system automatically tracks when a call is
started.
You can manually start camera tracking while in a call
or out of call.
1Press for five seconds on the remote
control.
The LED indicator on the camera system flashes
blue.
2Press or on the remote control to enable
camera tracking.
Set Video Input as EagleEye
Director II Camera
1In Skype for Business client, click > Video
Device.
2Select Polycom EagleEye Director II Camera
from the list.
3Click OK.
Tilt Analytics Camera
Tilting the analytics camera to an appropriate position
is important to view and track the participants.
1Press for five seconds on the remote
control.
The LED indicator on the camera system flashes
blue.
2Press and on the remote control to tilt the
analytics camera.
Do not press any button onthe remote control for
five seconds or press or to quit from tilting
the analytics camera.