POLYDENTIA Vista-Tec LupOn User manual

SWISS
MADE
English •Vista-Tec LupOn
Polydentia SA
via Cantonale 47 • 6805 Mezzovico-Vira • Switzerland
Phone [phone]2948 • Fax [phone]3203
polydentia.ch • [e-mail]
Made in Switzerland
REV 04 01.2021
EWarnings
In case of doubt regarding the effectiveness against risks that are difficult to assess, the user must NOT use the
product.
This product is not designed to protect the user from violent impacts against any obstacles.
The equipment does not protect from sunlight, UV radiation, laser and BLUE light (used in photopolymerization in
the dental field). Do not expose LupOn to sunlight or UV lamps for long periods.
Avoid exposing LupOn to chemicals, fumes, vapors or heat sources. Do not use solvents or organic liquids such
as petrol in contact with the product.
FIndications for proper cleaning and maintenance
Cleaning
It is advisable to remove the shield from the supports for cleaning.
Shields must be cleaned regularly after each use using warm water and neutral detergent. Use soft microfiber
cloths to dry the components.
The polycarbonate shields are characterized by high optical performance, so please pay special attention when
cleaning. The presence of particulate matter can cause scratches on the shield.
Surface disinfection of the LupOn clips and shields can be carried out using alcohol-based products.
Never immerse the components completely in disinfectant solutions. Please always refer to the disinfectant
manufacturer’s instructions.
Support Clips and fixing rings can be sterilized in an autoclave (up to 134 °C).
WARNING: Do not autoclave the shield.
Maintenance
LupOn is designed to be reused multiple times if kept in good condition.
Replace the damaged components if necessary.
GInformation for storage and transport
Store in a clean and dry place, away from sunlight and in an environment free of organic vapors. LupOn must be
transported and stored in its original packaging, at a temperature between +5 °C and +30 °C.
HRefills
Product REF Name Description
5633 Vista-Tec LupOn Kit 1 pair LupOn clips, 1 M-shield, 1 L-shield,
3 pairs oRings S,M,L
5635 Vista-Tec LupOn M-shields 5 medium shields
5636 Vista-Tec LupOn L-shields 5 large shields
5634 Vista-Tec LupOn oRings 3 pairs oRings S,M,L
for more
information
Instruction
for use

English •Vista-Tec LupOnEnglish •Vista-Tec LupOn
ADescription and field of application
Vista-Tec LupOn is a system composed of a transparent polycarbonate shield and support clips for the protection
of loupes and spectacles against liquid splashes or flying fine particles that may damage your magnification
equipment. Vista-Tec LupOn clips can be easily adapted to different frame shapes and sizes thanks to the
included elastic oRings that provide stable positioning on your loupes and spectacles.
Vista-Tec LupOn clips and elastic oRings are autoclavable.
The protective shields, made of premium optical quality polycarbonate, does not create distortions and visual
fatigue, also ensuring a wide field of vision. They are durable, do not yellow when exposed to light and are
reusable and easy to clean (see Paragraph E).
The protective shields are easily attached inserting them into the Vista-Tec LuPon clips.
Vista-Tec LupOn can be used in combination with surgical masks.
BComposition
Vista-Tec LupOn support clips: Polysulfone
Fixing ring: Silicone
Transparent shield: Polycarbonate
C Kit contents
DAssembly procedure
1Vista-Tec LupOn support clips SX and DX
2Elastic oRings Small - Medium - Large
3Vista-Tec LupOn M-shield (medium)
and L-shield (large)
1Select the most appropriate size of oRings:
if your loupes or spectacles feature a simple
metal frame as in the following images, we
suggest using size S. If your loupes feature
large temples, select size M or L.
2Keep Vista-Tec LupOn clips in place with your
finger while attaching one oRing to a LupOn
clip’s extremity. Loop the oRing around the
frame. Use two oRings for one LupOn clip.
3Repeat Point 2 for attaching the other LupOn
clip to the second temple arm.
4Select the most appropriate size of shield:
Vista-Tec LupOn system offers you two sizes
of shields: medium and large. We suggest
using M-shield (medium size) with Galilean
Loupes and L-shield (large size) for Keplerian
Loupes or when a lamp is installed on the
magnification system.
5First, remove the protective film on both sides
by the corners X.
6Insert the shield into the fixing clip in the
opening provided and secure it it to the clip by
sliding it up to the notch.
Gently press the final part of the clip into the
notch until you hear a click.
7Image of the device correctly assembled.
XX