Polygroup FunSicle Pool Canopy User manual
EN
User Guide
©2022
Sign up for future
offers and discounts.
Scan the QR Code.
09C3A5USAA01
Pool Canopy
2
IMPORTANT SAFETY INSTRUCTIONS
When installing and using this product, basic safety precautions should always be followed,
including the following:
READ AND FOLLOW ALL INSTRUCTIONS
Keep this User Guide for future reference.
•During poor weather conditions (e.g. heavy rain, snow, or strong winds), make
sure to dismantle the pool canopy completely from the pool and keep all the
parts in a safe place.
•Do not place the canopy near any heat source.
•Do not use the canopy poles as support when entering or exiting the pool. The
poles cannot support the weight of a person.
• Do not over-stretch the canopy, pulling the canopy too tight may cause the
clamps and poles to collapse into the pool.
Safety Guidelines
Assembling the Pool Canopy
Warnings
STEP 1: Remove one Pole and one Upper Clamp from the packaging. Insert the Pole
through the hole of the Upper Clamp.
STEP 2: Install the Lower Clamp the same way as Step 1.
STEP 3: Repeat Steps 1 & 2 for all 3 poles.
Safety Guidelines
2
Welcome!
Congratulations on your new Funsicle Pool Canopy for round above ground frame pools.
This guide will walk you through everything about assembling your Pool Canopy.
As always, we’re here to help. For any issues, questions, or extra support, visit
funsicle.com/support, or contact Customer Service at 888-670-4FUN (888-670-4386) or
• Pool Canopy Model P501418F: Fits 14 to 18 ft metal frame round pools.
Pool Canopy Model P502024F: Fits 20 to 24 ft metal frame round pools.
• Check to make sure the vertical legs or your pool belong to one of the shapes and
sizes as the following:
1.25", Round1.5", Round
55 X 35 mm,
Oval
60mm in width,
D-shaped
66mm in width,
D-shaped
Shape
Size
E
D
C
BA
3
STEP 4: Turn the Wing Knob counter-clockwise to loosen the clamp (see Figure A). Attach
the pole onto the pool’s vertical beam. Then, turn the Wing Knob on the clamps
clockwise to tighten.
STEP 5: Unclip the Cam Lock to raise the pole to the desired height. Once the pole height
is adjusted, lock the pole into place (see Figure B).
STEP 6: Adjust the Canopy Belt, then buckle it to the top of the pole (see Figure C). Canopy
should have a slight bow, and should not be pulled too tight.
STEP 7: To create better shade, adjust the canopy height (see Figure D). Detach the belt
buckle, adjust each poles’ length and clamps’ position. After the height is adjusted,
buckle the belt to secure in place.
Pole
Upper
Clamp
Knob
Guiding Slot
NOTE: Make sure the
Knob snaps into the hole
on the Lower Clamp.
Locking Hole
Knob
STEP 1 STEP 2 STEP 3
Lower
Clamp
Parts List
123
3 Upper Clamps 3 Lower Clamps 1 Canopy
4
3 Poles
Canopy
Belt
Wing Knob
A
Cam Lock
BC
D1
2
Dear Funtastic Customer,
Thank YOU for choosing one of our
Funsicle products. We’re on a
mission to inspire the world to play
more outdoors, which is why we
design products that capture the
summertime spirit of imagination,
connection and fun.
It’s important to us that you have the
BEST experience with this product,
and we’re excited for you to make
some happy outdoor memories.
Need a helping hand? Use the
contact info on this page to reach us.
Once again, we thank you for
placing your trust in us. Happy
swimming and playing!
- Your friends, the Funsicle Team
CONTACT US
We’re here to help! For answers to common
questions, setup videos and troubleshooting tips,
visit funsicle.com/support or scan the QR code.
DO NOT RETURN PRODUCT TO STORE.
If you encounter any issues with your Funsicle
product, do not return it to the place of purchase.
Contact CUSTOMER SERVICE:
Phone: 888-670-4FUN (888-670-4386)
Email: [email protected]
REGISTER YOUR PRODUCT
Scan the QR code
Distributed by:
Polygroup Pacific Limited
Unit 606, 6th Floor, Fairmont House,
8 Cotton Tree Drive, Central, Hong Kong.
