Polywood 1911 User manual

Back
Front
9/12/2012
ASSEMBLY INSTRUCTIONS
QTY A DESCRIPTION
6A
B
B
Attach brace and foot rest into pockets on side frames using (6) 3" screws.
Do not tighten screws until last step.
A
ALL HARDWARE IS STAINLESS STEEL
B
B
Attach seat to side frames using (2) 3" screws for front leg
and (2) 1-3/4 bolts for back leg.
STEP 1
STEP 2
A
- (2) Side frames RH/LH
- (1) Seat assembly
- (1) Back assembly
- (1) Medallion brace
- (1) Foot rest
- (1) Hardware pack
STEP 3
Attach back assembly to side frames
using (4) 1-3/4 bolts.
Tighten all screws.
MODEL: 1911 - 1912
TOOLS NEEDED
B - .27 X 3 SOCKET WAFER "A"
8
A - 1/4-20 X 1-3/4 WAFER SHCS
4MM HEX KEY, ALLEN, T-HANDLE
(INCLUDED)

C
C
Long Brace
A
A - 1/4-20 X 2-1/2 WAFER SHCS
4
B
B
C
C
Short Brace
Qty. Description
Step 3
Model: NCBT31 & LB31
Attach Long leg braces to the
Step 1
Attach feet to legs using (4) 2½" Chair bolts.
leg assemblies using
4mm HEX KEY: INCLUDED
ALL HARDWARE IS COATED STAINLESS STEEL
(4) .27x3" screws
(4) .27x3" screws
leg assemblies using
Step 2
Lay table top on flat surface.
Attach the leg assemblies to the table frame using
(8) .27x2-1/2" screws
__(2) Long Braces
__(2) Short Braces
__(2) Hardware pack
(Table\Leg Kit)
__(1) Table top
__(4) Leg
__(2) Foot
Step 4
Attach Short leg braces to the
TOOLS NEEDED
9/17/2012
ASSEMBLY INSTRUCTIONS
8B - .27 X 2-1/2 SOCKET WAFER "A"
C - .27 X 3 SOCKET WAFER "A"
8