Polywood Club Settee CLC47 User manual

B - 1/4-20 x 1/2" BARREL NUT A
ALLHARDWAREISCOATEDSTAINLESSSTEEL
A
Left top rail
A
Left sideframe A
9/14/2012
ASSEMBLY INSTRUCTIONS
Qty.
Model: CLC47 & CMC47
__(1) Hardware pack
See page 2
TOOLS NEEDED
Description
Attach right sideframe to seat assemby and
Phillips head screwdriver
4mm" HEX KEY: INCLUDED
Step 1
- Attach seat support to seat assembly
using (2) 3” chair screws
Step 3
Lay another seat assembly on its side.
are assembled.
-Repeat until all seats and backs
using (2) 3” chair screws
- Attach back assembly to seat assembly left top rail using (4) 3” chair screws
Attach left sideframe to seat assemby and
Lay a seat assembly on its side.
Step 2
right top rail using (4) 3” chair screws
*CLC47 shown
__(2) Seat assembly
__(2) Back assembly
__(2) Seat support
__(2) Top rails
Right, Left
__(2) Sideframes
__(1) Front mid leg
__(1) Rear mid leg
__(2) Seat cushion
__(2) Back cushion
3
Back assembly
Seat assembly A
Seat support
A
A - 14 X 3 SOCKET WAFER "B"
16
C - 1/4-20 X 1-1/2 WAFER SHCS
1
D - 1/4-20 X 3-1/4 WAFER SHCS
2

B
B
C
B
D
D
Step 5
Attach all sections together using
B - (3) capnuts
C - (1) 1 1/2" chair bolt
D - (2) 3 1/4" chair bolts
Model: CLC47 & CMC47
Fit all sections together with mid legs
Step 4
CMC47
9/14/2012
ASSEMBLY INSTRUCTIONS