Polywood K147 User manual

4mm Hex Key, Allen, T-handle
(INCLUDED)
Step 4
Attach finials to top of post
Rocker bottom
B
Sideframe
NOTE: Partialy thread both screws
into post before tightening.
Rocker bottoms may require some
flexing for proper fit.
Head piece
A
B
4mm Hex Key for Drill: (INCLUDED)
Back insert
A
B
Seat frame
Seat insert
Long braces
Short
brace
B - .27 X 3 SOCKET WAFER A
2Finial w/dowel screw
4
A - 1/4-20 X 2-1/2 WAFER SHCS
11/21/2012
ASSEMBLY INSTRUCTIONS
Qty. Description
14
__(1) Seat insert
__(1) Short brace
using (4) .27x3 wafer screws.
Step 3
Insert head piece into top of post
Repeat step 2 on other side
__(2) Long braces
Model: K147
TOOLS NEEDED
__(1) Head piece
to one of the sideframes using (5) .27x3” chair screws.
Note: Front of seat is wider
Attach back insert to sideframe using (2) 2½” chair bolts.
__(1) Seat frame
__(1) Hardware pack
__(2) Sideframes
__(2) Rocker bottoms
__(1) Back insert
Step 2
Attach long braces, short braces, seat frame and seat insert
Step 1
Attach rocker bottoms to sideframes
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED

To view our full warranty, please visit the warranty page on our website at
polywoodinc.com/resources.
If you have questions or concerns regarding assembly instructions or missing parts,
please contact us at [phone] or email suppor[email protected]
youtube.com/polywood@POLYWOODINCPOLYWOOD POLYWOODPOLY-WORLD
Blog