Polywood R100 User manual

B - .27 X 3 SOCKET WAFER A
12
9/13/2012
ASSEMBLY INSTRUCTIONS
Attach seat using (2) .27x2 1/2" screws
Qty. Description
using (4) .27x3” screws.
Note: front of seat is wider
Model: R100
Repeat step 1 on other side
Insert head piece into top of post
__(1) Back
__(1) Seat
__(1) Long brace
__(1) Short brace
__(1) Head piece
__(1) Hardware pack
__(2) Sideframes
__(2) Rocker bottoms
Step 1
Attach long brace, short brace and back
Step 2 Step 3
Attach rocker bottom with (4) 14x3" screws
TOOLS NEEDED
4MM HEX KEY, SHORT, FOR DRILL
INCLUDED
Seat frame
sideframe
back frame
Long brace A
B
BB
A
Short brace
B
HARDWAREISCOATEDSTAINLESSSTEELUNLESSOTHERWISESPECIFIED
NOTE: Partialy thread both
screws
into post before tightening.
Rocker bottoms may require
some
flexing for proper fit.
Head
4MM HEX KEY, ALLEN, T-HANDLE
INCLUDED
A - .27 X 2-1/2 SOCKET WAFER A
4

A - .27 X 2 SOCKET WAFER A
Qty. Description
4mm HEX KEY, ALLEN, T-HANDLE
TOOLS NEEDED
using (4) 2" screws
Step 1
ALL HARDWARE IS STAINLESS STEEL
Model: SBT18, SBT26 Attach sideframes to table top
using (4) 2" screws
(INCLUDED)
Step 2
Attach braces to sideframes
8
__(1) Table top
__(2) Sideframes
__(2) Braces
__(1) Hardware pack
9/17/2012
ASSEMBLY INSTRUCTIONS