POOLiN EOC05 User manual

Welcome To Use Your POOLIN
EOC05 Embroidery Machine
It is recommended for beginners to test according to the
operational instruction first, and feel free to contact us if
you have any questions.
Needle Auto Cutting
Start/Stop

Check the accessories
USB Seam Ripper
Shuttle Race Cover
Spool Pin Cap
Embroidery
presser foot
(on the machine)
Wrench
Bobbin cover*2 Power cable User manual An envelope
Tweezers Stylus Scissprs Hoop 100*235 Hoop 100*100
Needles The bobbin*3Mini Slotted
Screwdriver
Reminder: There are teaching videos in the USB, please according to the instructions of the quick
guide to view the videos to set up the machine, please check the video named "1. All accessories".

Check the bobbin
Tips：Please be sure to install the bobbin in the direction indicated by the arrow.
Please check the video named” 2. Install the bobbin”.

Threading the machine
Tips: Be sure to lift the presser foot before threading.
Please check the video named” 3. Threading”.

Automatic needleth reader
Tips: Be sure to lift the presser foot before threading.
Please check the video named” 3. Threading”.

Install the frame
Tips: 1.Before installation, please loosen the screws to install the
embroidery frame.
2.Stabilizer must be added under the fabric.
3.Clamp the fabric and stabilizer in the embroidery frame, tighten
the screws, and gently pull the fabric to flatten it.
4.Please check the video named “4. Install the embroidery
frame”.

Start up
Power Switch
Poolin EOC05 is divided into three parts: Pattern——Config——Embroidery.

Choose the pattern
Please check the videos named:”5. choose the patterns”.
——As a beginner, we recommend that you choose a solid color pattern from our built-in
patterns to do a embroidery test first.
Current Pattern

Config the pattern
Choose the color you want to embroider.
Select the appropriate embroidery frame.
Please check the videos named:”5. edit the patterns”.
Color Selection
Frame Selection
You can adjust the pattern on this interface.

Embroider the pattern
Ready
Rehearsal the Pattern Frame
Click the button to confirm the embroidery range.
Click “ready”button.
Put down the presser foot and click the start button on the machine to start embroidery.
Please check the videos named:”5. embroidery the patterns”.
After the above operations, you can start embroidery work on this page.

After completing the above tests, you can start your own diy
embroidery journey. If you encounter any problems, you can check the
user manual or feel free to contact us at any time.
[email protected]
[phone]
https://www.facebook.com/profile.php?id=100073186299060
Poolin Users Group
Contact us