Portable Partitions MP10 User manual

Versare Solutions 3306 5th Street NE Minneapolis, MN 55418
Phone: [phone] Fax: [phone] www.PortablePartitions.com
MP10 Instructions
Recommended tools Step 1: Place box on side and open
Step 2: Rotate box so open end is down Step 3: Pull box off partition
Step 4: Install casters. Tap in until fully seated* Step 5: Install 8 casters as shown
Page 1 of 3
* Casters can be installed on either end, the Portable Partitions logo is the top

Versare Solutions 3306 5th Street NE Minneapolis, MN 55418
Phone: [phone] Fax: [phone] www.PortablePartitions.com
MP10 Instructions
Step 6: Lay partition on its side Step 7: Remove outer banding and set top
panel along side with logo facing down**
Step 8: Rotate banded assembly onto the
panel in step #7
Step 9: Attach banded assembly to rst
panel as shown below
Step 10: Add last panel and fasten as in
step #9
Step 11: Carefully begin rotating partition
on its wheels
Page 2 of 3
** DO NOT CUT THE SECOND SET OF BANDING BELOW THE FIRST PANEL

Versare Solutions 3306 5th Street NE Minneapolis, MN 55418
Phone: [phone] Fax: [phone] www.PortablePartitions.com
MP10 Instructions
Step 12: Securely hold the unit from the
top as it rotates on its wheels
Step 13: Set in position
Step 14: Cut the top banding Step 15: Cut the bottom banding
Page 3 of 3