Portos A-OK User manual

User's manual
of an A-OK
wind sensor
The operating
frequency of the receiver
is 433MHz

1. Programming a wind sensor for proper receiver configuration:
1. On the already programmed remote control, choose the channel assigned to the
receiver that is to be configured.
2. Press and hold the 'stop' button for 5 seconds on the remote control - the UP/DOWN
motor movement will confirm successful performance of the operation.
3. Press the 'join' button on the wind sensor - the UP/DOWN motor movement will confirm
successful performance of the operation.
5 seconds
join
SET
2. Setting up the sensor sensitivity levels:
1. On the already programmed remote control, choose the channel assigned to the
receiver that is to be configured.
2. Press and hold the 'stop' button for 5 seconds on the remote control - the UP/DOWN
motor movement will confirm successful performance of the operation.
3. Press the 'join' button on the wind sensor - the UP/DOWN motor movement will confirm
successful performance of the operation.
źPressing buttons with wind or sun symbols will change the settings of a given
sensor by one level
ź0 Level means that a given sensor is on

Table of levels and speed of wind
Level of
sensitivity
Speed
of wind
1 2 3 4 5 6 7 8 9
10,8
km/h 18 km/h 25,2 km/h 32,4 km/h 39,6 km/h 50,4 km/h 72 km/h 111,6 km/h 208,8 km/h
3. Test mode:
1. On the sensor, press and hold simultaneously for 3 seconds a button with the wind
symbol and the SET button, a number will be blinking on the display screen. This number
will represent the current wind level.
2. If the test mode is on, time needed for the activation of sensors is shortened.
3. To go back from the test mode, press and hold for 3 seconds the wind and the SET
buttons again or wait for 3 minutes - the test mode will switch off automatically.
join
SET
3 seconds
join
SET
3 seconds
4. Reversing the operating directions:
1. Press the wind and sun symbol button simultaneously. The screen will display UP or DN
message.
join
SET

11
PORTOS TR7
spółka z ograniczoną odpowiedzialnością s. k.
WARNING - FOR THE SAFETY OF PEOPLE, IT IS IMPORTANT TO
FOLLOW THESE USER'S INTRUCTIONS.
KEEP THESE USER'S MANUAL AT ALL TIMES.