pottery barn kids REESE STOARGE User manual

Date: 2015-AUG-24 Page 1 of 9
Rev:
pottery barn kids
REESE STOARGE
www.potterybarnkids.co

Date: 2015-AUG-24 Page 2 of 9
Rev:
Important Safety Instructions:
• Please read all instructions carefully before asse bling.
• For your safety, asse bly by two or ore adults is strongly reco ended.
• Keep instructions for future use.
• Use only vendor supplied hardware to asse ble. Using unauthorized hardware could jeopardize the structural
integrity of the ite .
Pre-assembly:
• Re ove all parts and hardware fro the box and lay out on a clear carpeted or scratch-free work surface, as
this will avoid da aging parts during asse bly. The shipping box provides an ideal work surface.
• Do not dispose of any packaging or contents of the shipping carton until asse bly is co pleted to avoid
accidentally discarding s all parts or hardware.
• Use the parts and hardware lists below to identify and separate each of the pieces included.
• The illustrations provided allow for easier asse bly when used in conjunction with the asse bly instructions.
• The use of power tools to aid in asse bly is not reco ended. Power tools can da age hardware and split
wood.
• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions ay cause the
bolts to isalign during asse bly.
Parts Included:
(A) Top Panel (1x)
(B) Botto Panel (1x)
(C) Long Shelf (1x)
(D1) Left Side Panel (1x)
(D2) Right Side Panel (1x)
(E1) Top Back Panel (1x)
(E2) Middle Back Panel (1x)
(E3) Botto Back Panel (1x)
(F) Short Shelf (1x)
(G) Top Divider (1x)
(H) Botto Divider (1x)
(I) Door (1x)
(J) Adjustable Shelf (1x)
(K) Mediu Shelf (1x)
(L) Base (1x)
(M) Leg (4x)
Tool Required: Philips Head Screwdriver (not included)

Date: 2015-AUG-24 Page 3 of 9
Rev:
Hard are Included:
(N) Allen Key – 1x
(O) Bolt 5/16”x51 – 8x
(P) Spring Washer 5/16” – 8x
(Q) Flat Washer 5/16” – 8x
(R) Bolt 1/4”x25 – 28x
(S) Bolt 1/4”x51 – 10x
(T) Spring Washer 1/4” – 38x
(U) Flat Washer 1/4” – 38x
(V) Machine Screw 5/32”x19 – 2x
(W) Plastic Cap – 2x
(X) Shelf Support – 4x
(Y) Handle – 1x
(Z) Wood Screw 3.5x19 – 43x
Assembly Instruction Steps:
1. Attach (F) to (G) as shown below.
R 2x
T 2x
U 2x

Date: 2015-AUG-24 Page 4 of 9
Rev:
2. Attach the asse bled piece and (H) to (C) as shown below.
3. Attach (K) to the asse bled piece as shown.
R 4x
T 4x
U 4x
R 2x
T 2x
U 2x

Date: 2015-AUG-24 Page 5 of 9
Rev:
4. Attach (D1) and (D2) to the asse bled piece as shown.
5. Attach (A) to the asse bled piece as shown.
R 8x
T 8x
U 8x
R 6x
T 6x
U 6x

Date: 2015-AUG-24 Page 6 of 9
Rev:
6. Attach (I) to the asse bled piece and then attach (B) to the asse bled piece as shown.
7. Attach (Y) to the asse bled piece as shown.
R 6x
T 6x
U 6x
W 2x
Y 1x
V 2x

Date: 2015-AUG-24 Page 7 of 9
Rev:
8. Attach (M) to (L) as shown.
9. Attach the asse bled base to the asse bled storage unit as shown.
O 8x
P 8x
Q 8x
S 10x
T 10x
U 10x

Date: 2015-AUG-24 Page 8 of 9
Rev:
10. Attach (E1), (E2) and (E3) to the asse bled piece as shown.
11. Insert Shelf Support (X) onto corresponding holes. Place (J) onto the Shelf Supports.
E1
E
2
E
3
Z 43x
X 4x

Date: 2015-AUG-24 Page 9 of 9
Rev:
12. When needed, adjust the levelers located under the legs up and down to keep the ite level.
Care Instructions:
• Dust often using a clean, soft, dry and lint-free cloth.
• Blot spills i ediately and wipe with a clean, da p, cloth.
• We do not reco end the use of che ical cleansers, abrasives or furniture polish on our lacquered finish.
• Hardware ay loosen over ti e. Periodically check to ake sure all connections are tight.
Re-tighten if necessary.
Thank you for your purchase
Stores | catalog | www.potterybarnkids.co
USA 1.800.290.8181