Power Dynamics DJ Laptop stand +tray User manual

DJ Laptop stand +tray
Ref. nr.: 180.043
INSTRUCTION MANUAL
V1.0

ENGLISH
Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using
the unit in order to benefit fully from all features.
This stand is ideal for DJs, Musicians and lighting designers. It can hold a laptop as wide as 17”. It may be used to
support other machinery including mixers, controllers, printers etc. It can be placed on the table or on the case.
PART LIST
Part No.
Part Name
Qty (pcs)
1
(NA)
2
Right bottom support
1
3
Plastic knob
4
4
Rubber wash
8
5
Right top holder
1
6
Anti vibration pad
4
7
Cross rod
2
8
Width adding piece
2
9
Left top holder
1
10
Left bottom support
1
11
(NA)
12
Level table bar
2
13
M5 screw
4
ASSEMBLY INSTRUCTIONS
1. Install the stand as per one of the following drawings
2. Tighten the screws and knobs
3. Place the laptop on the stand
4. Do not throw away any of the parts or packaging
PLACE ON THE TABLE

Specifications and design are subject to change without prior notice..
www.tronios.com
Copyright © 2016 by TRONIOS the Netherlands