Power Fist 8976904 User manual

V4.0 8976904
Pleaseread and understand allinstructionsbeforeuse.Retain this manualfor
futurereference.
User Manual
1.45 GPM @ 1,600 PSI Electric
Pressure Washer

8976904 1.45 GPM@ 1,600 PSI Electric Pressure Washer V4.0
2 For technical questions call 1-800-665-8685
SPECIFICATIONS
Voltage Rating (V AC) 120
Amperage Rating(A) 11
Max.Pressure Rating(PSI) 1,600
Max.Flow Rate (GPM)
1.45
Max.Inlet WaterTemperature(°C)
50
Max.Inlet WaterTemperature(°F) 122
Max.Outlet WaterTemperature (°C) 50
Max.Outlet WaterTemperature (°F)
122
PowerType Electric
MotorType Universal
Pump Type
Aluminum axial wobble plate
ChemicalInjectorType
Foamcannon
Nozzle Size (°) 0 to 60
Nozzle Type Variable spray
Hose Size
20 ft
Hose Material PVC
Cart Frame Material
Plastic
Wheel Size (in.) 5
Wheel Type Plastic
Cord Length(ft) 35
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personalinjury
and/or damage to the equipment.
1.45 GPM @ 1,600 PSI Electric
Pressure Washer

V4.0 1.45 GPM@ 1,600 PSI Electric Pressure Washer 8976904
Visitwww.princessauto.comfor more information 3
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice
is an alert that there is a possibility of property damage, injury or death if certain
instructions are not followed.
DANGER! This notice indicates an immediate and specific hazard that will
result in severe personal injury or death if the proper precautions
are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice that
could result in severe personal injury or death if the proper
precautions are not taken.
CAUTION! This notice indicatesa potentially hazardous situation that may result
in minor or moderate injury if proper practices are not taken.
NOTICE! This notice indicates that a specific hazard or unsafe practice will
result in equipment or property damage, but not personal injury.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean, well-lit and
free of distractions. Place lights so you are not working in a shadow.
2. Keep anyone not wearing the appropriate safety equipment away from the
work area.
3. Store unused tools properly in a dry, safe and secure location to prevent
rust, damage or misuse.
4. Using a pressure washer can create puddles and slippery surfaces. The
work area should have adequate slopes and drainage to reduce the
possibility of falling due to slips.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).

8976904 1.45 GPM@ 1,600 PSI Electric Pressure Washer V4.0
4 For technical questions call 1-800-665-8685
PERSONAL PROTECTIVE EQUIPMENT
1. Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
a. Use indirect vented safety goggles designed for wet conditions to
protect eyes from injury. Spray from this unit has extreme pressure and
can ricochet back splashing water or propelling objects towards eyes.
2. Wear protective clothing and gloves designed for the work environment,
materials and tools.
3. Non-skid footwear is recommended to maintain footing and balance in the
work environment
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1. Do not operate any tool when tired or under the influence of drugs, alcohol
or medications.
2. Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3. Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
4. Securely hold this tool using both hands. Using a tool with only one hand
can result in loss of control.
SPECIFIC SAFETYPRECAUTIONS
WARNING! DO NOTlet comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1. NEVER defeat the safety features of this product.
2. DO NOT leave the spray gun unattended while the unit is running.
3. Always operate the pressure washer from a stable surface. Avoid using the
pressure washer from precarious locations such as ladders or scaffolding.

V4.0 1.45 GPM@ 1,600 PSI Electric Pressure Washer 8976904
Visitwww.princessauto.comfor more information 5
4. DO NOT attempt to repair damaged or defective high-pressure hoses.
Always replace them.
5. DO NOT repair leaking connections with sealant of any kind. Replace the
O-ring or seal.
6. DO NOT disconnect the high-pressure hose from the pump and spray gun
while the system is pressurized.
7. Always ensure that the spray gun, nozzles, hoses and fittings are correctly
attached before starting the motor.
8. NEVER hold onto the hose or fittings during operation. This can allow
pressurized water to escape and inflict an injury.
9. DO NOT plug this pressure water into a hot water supply. This pressure
washer is designed for cold water use only.
10. Prior to starting the pressure washer in cold weather, be sure ice has not
formed in any part of the equipment.
11. Ensure the pressure washer is not covered during operation to avoid
overheating the motor.
12. This pressure washer is capable of producing high pressure (see
Specifications). To avoid property damage and personal injury, do not
operate the pump with components rated for less than the
working pressure.
13. DO NOT connect the pressure washer to a water source that exceeds
150 PSI.
14. If connecting the pressure washer to a portable water system, ensure the
water system is protected against backflow.
15. NEVER attach or remove wand or hose fittings while system is pressurized.
16. NEVER transport or make adjustments to this unit while it is running.
17. DO NOT allow the high pressure hose to come in contact with any hot part
of the unit. The hose might be damaged, possibly causing it to burst or
leak under high pressure.
18. Shut off the pressure washer if it is leaking water. Discharge all pressure
before tightening fittings or having repair work done by a
qualified technician.

8976904 1.45 GPM@ 1,600 PSI Electric Pressure Washer V4.0
6 For technical questions call 1-800-665-8685
ELECTRICALSAFETY
WARNING! Do not touch or handle a live tool with any part of your body that
is wet or damp. Wet skin reduces resistance to electrical current,
increasing the danger of a serious or fatal shock.
1. Shut the power off and disconnect the tool from the power supply (if
possible) before making any adjustments, changing accessories, cleaning,
servicing or when storing. Such preventive safety measures reduce the risk
of starting the tool accidentally.
2. Do not alter any parts of the tool or accessories. All parts and accessories
are designed with built-in safety features that may be compromised
if altered.
3. Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
4. Do not expose the tool to rain, snow, frost or any other damp or wet
conditions. Water entering a tool will increase the risk of electric shock.
POWER CORD SAFETY
1. Insert the power cord plug directly to the power supply whenever possible.
Use extension cords or surge protectors only when the tool's power cord
cannot reach a power supply from the work area.
a. When operating a tool outside, use an outdoor extension cord marked
W-A or W. These cords are rated for outdoor use and reduce the risk of
electric shock.
2. Do not operate this tool if the power cord is frayed, damaged or poorly
spliced, as an electric shock may occur, resulting in personal injury or
property damage.
3. Discontinue use if a power cord feels more than comfortably warm while
operating the tool.
4. Keep all connections dry and off the ground to reduce the risk of electric
shock. Do not touch the plug or wiring with wet hands.
5. Prevent damage to the power cord by observing the following:

V4.0 1.45 GPM@ 1,600 PSI Electric Pressure Washer 8976904
Visitwww.princessauto.comfor more information 7
a. Place the power cord in a position that prevents it from coming into
contact with the tool or getting caught by the workpiece. The cord
should always stay behind the tool.
b. Do not pull on the cord to disconnect the plug from an outlet.
c. Keep the cord away from heat, oil, sharp edges or moving parts.
d. Never carry the tool by the power cord
6. Position the cord so it is not be stepped on, tripped over or otherwise
subjected to damage or stress.
7. Do not wrap the cord around the tool, as sharp edges may cut insulation or
cause cracks if wound too tight. Gently coil cord and either hang on a hook
or fasten with a device to keep cord together during storage.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failureto do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the Identification Key are included.
IDENTIFICATION KEY

V4.0 8976904
Pleaseread and understand allinstructionsbeforeuse.Retain this manualfor
futurereference.
A. Trigger Gun
B. Spray Wand
C. Water Outlet
D. Wheel
E. Universal Wheel
F. High-Pressure Hose
G. Extension Wand
H. ON/OFF Switch
I. Power Cord with GFCI Plug
J. Water Inlet
K. Storage Belt for Power Cord
and Hose
L. Cleaning Pin
ASSEMBLY& INSTALLATION
Letter references in parenthesis (A) refer to the included Identification Key.
1. Fit the spray wand into (B) the trigger gun (A) and rotate it until the two
parts are completely locked. Refer to Fig. 1.
Fig. 1
2. Connect the end of the high-pressure
hose (F) to the trigger gun and twist the
nut to secure the connection. Refer to
Fig. 2.
Fig. 2

V4.0 1.45 GPM@ 1,600 PSI Electric Pressure Washer 8976904
Visitwww.princessauto.comfor more information 9
3. Connect the other end of the high-
pressure hose to the water
outlet (C) of the pressure washer
and twist the black rotatable end-
piece to secure the connection.
Refer to Fig. 3.
Fig. 3
4. Connect the garden hose
adapter (female coupler) to the
water inlet (J) of the pressure
washer and then thread the garden
hose (male end) into the garden
hose adapter. Refer to Fig. 4.
Fig. 4
OPERATION
ATTENTION! Dry running of more than 2 minutes leads to damage of the high-
pressure pump. If the device does not build up pressure within 2 minutes,
switch it off and proceed in accordance with the instructions in the
Troubleshooting Section.
HIGH PRESSURE OPERATION
CAUTION! Keep a distance of at least 30 cm when using the jet for cleaning
painted surfaces to avoid damage.
CAUTION! Make sure the ON/OFF switch is set to OFF and insert the plug into
a properly installed socket.
ATTENTION! The washer must be used on a secure and stable surface in a
standing, upright position
Connect the device to the power and water supply as indicated in the Assembly
& Installation Section
1. Turn on the water supply.

8976904 1.45 GPM@ 1,600 PSI Electric Pressure Washer V4.0
10 For technical questions call 1-800-665-8685
2. Hold the spray gun with both hands.
3. Direct the nozzle of the chosen accessory away from you towards the
surface to be cleaned.
4. Unlock the trigger and press it until a constant amount of water flows
through the nozzle, allowing air trapped in the hose to escape.
5. Release the trigger.
6. Turn on the ON/OFF switch.
7. Hold the spray gun with both hands. Direct the water jet to the object to be
cleaned and press the trigger.
8. Release the lever of the trigger gun. The device will switch off and stop the
water jet. High pressure remains in the system.
WARNING! Beware of kickback when pressing the trigger!
INTERRUPTING OPERATION
1. Release and lock the lever of the trigger gun.
2. Put the trigger gun with the spray lance into the parking position.
3. During longer breaks (more than 5 minutes), turn the device off using the
ON/OFF switch.
AFTER OPERATION
1. Release the lever of the trigger gun.
2. Turn off the ON/OFF switch.
3. Disconnect the plug from the socket.
CAUTION! Only separatethe high-pressure hose from the trigger gun or the
device when there is no pressure in the system.
4. Turn off the water supply.
5. Squeeze the trigger gun lever to release any remaining pressure in
the system.
6. Release and lock the lever of the trigger gun.
NOTICE! When disconnectingthe supply or high pressure hose, warm water
may leak from the connection after operation.
7. Detach the device from the water supply.

V4.0 1.45 GPM@ 1,600 PSI Electric Pressure Washer 8976904
Visitwww.princessauto.comfor more information 11
CARE& MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Only use accessories intended for use with this tool. Follow instructions for
changing accessories.
4. Keep the tool handles or gripping surfaces clean and dry.
5. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
AFTER EACHUSE
CHECK HIGH PRESSURE HOSE
WARNING! NEVER repair the high pressure hose. Repairs can fail and will be
weaker than the hose itself. A hose that fails while under pressure can
inflict a serious injury. Replace with a hose that has a maximum pressure
rating that exceeds the pressure washer’s maximum output.
The high pressure hose can develop leaks due to wear, kinking or misuse and
abuse. Inspect the hose each time before using it. Check the hose for cuts,
leaks, abrasions or bulging spots. Also check the couplings to ensure they are
not loose. Replace the hose immediately if any of these conditions exist.
CHECK SPRAY GUN
Examine the hose connection to the spray gun and make sure it is secure.
Check that the trigger lock is in place to prevent accidental spraying. Replace
the spray gun immediately if the trigger lock is damaged or will not remain
in place.

8976904 1.45 GPM@ 1,600 PSI Electric Pressure Washer V4.0
12 For technical questions call 1-800-665-8685
CHECK SPRAY WAND AND ADJUSTABLE NOZZLE
A pulsing sensation felt when squeezing the trigger indicates either the spray
wand or the pressure nozzle is partially clogged and is causing pressure to build
in the pump.
1. Shut off the motor and turn off the water supply. Then release the pressure
in the pump system by aiming the spray gun in a safe direction and
squeezing the trigger.
2. Remove the adjustable nozzle section from the wand.
3. Use the cleaning pin (L) or a small paper
clip to free any foreign material clogging
or restricting the spray nozzle. Refer to
Fig. 5.
4. Back flush the nozzle to remove
the debris.
5. Disconnect the spray gun wand and
check for foreign material that may clog
the tube.
6. Remove additional debris by back flushing water through the spray gun
wand using a garden hose.
7. Reattach the adjustable nozzle to the spray wand.
8. Reconnect spray wand to the spray gun.
9. Make sure the garden hose is connected to the pump’s water inlet. Check
that high pressure hose is connected to spray gun and pump. Turn on
the water.
10. Start the motor.
11. Test the adjustable nozzle through its full range to ensure it is unclogged.
REPAIRING LEAKING CONNECTIONS
WARNING! Do not use thread-sealtape or liquid to prevent leaks in the high
pressure hose. This can cause a high pressure leak that can result in a
serious injury or injection injury.
Fig. 5

V4.0 1.45 GPM@ 1,600 PSI Electric Pressure Washer 8976904
Visitwww.princessauto.comfor more information 13
1. Replace the O-rings of any connection that leaks.
2. Replace the connectors if the leaks continue.
3. Tip the pressure washer onto its side to remove water from the pump
CLEANING
Use a damp cloth to wipe exterior surfaces clean. A soft bristle brush can
loosen caked on dirt, oil, etc. A vacuum cleaner will remove loose dirt and
debris in difficult to reach places.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility. Contact your
local municipality for a list of disposal facilities or by-laws for electronic
devices, batteries, oil or other toxic liquids.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Problem(s) Possible Cause(s) Suggested Solution(s)
No pressure or
Low pressure.
1. Lowwater supply.
2. Nozzle obstructed.
3. Water filterscreen
obstructed.
4. Defectivethermal
relief valve.
5. Air in hose.
6. High pressure hose
too long.
1. Water supply mustbe 2.5 GPM
@ 40 to 60 PSI.
2. Clean nozzleof debris.
3. Remove and clean filter.
4. Replace the thermal relief valve
or have a qualified technician
repair it.
5. Stop the motorand water
source.Disconnect water
source from pump inlet and
turn water sourceto ON to
remove all air from hose.When
steady stream of water is
present,turn water source to
OFF.Re-connect watersourceto
pump inlet and turn on water

8976904 1.45 GPM@ 1,600 PSI Electric Pressure Washer V4.0
14 For technical questions call 1-800-665-8685
source. Squeeze trigger to
remove remaining air.
6. Replacewith shorter length of
high-pressure hose until water
flows.
No or low
pressure (after
period of
normal use).
1. Worn seal or
packing.
2. Worn or obstructed
valves
3. Worn unloader
piston.
4. Worn start valve.
Have parts cleaned or replaced by
authorized dealer.
Waterleaking
at spray gun/
spray wand
connection.
1. Worn or broken O-
ring.
2. Loosehose
connection.
1. Check and replace O-ring.
2. Tighten hoseconnection.
Waterleaking
atpump.
1. Looseconnections.
2. Piston packing is
worn.
3. Worn or broken O-
rings.
4. Pump head or tubes
damaged from
freezing.
1. Tighten connections.
2. Have parts cleaned or replaced
by authorized dealer.
3. Have parts cleaned or replaced
by authorized dealer.
4. Have parts cleaned or replaced
by authorized dealer.
Pump pulsates. Nozzle obstructed. See Check Spray Wand and
Adjustable Nozzle section.
Motorwillnot
start.
1. Plug notproperly
inserted in outlet.
2. Faulty outlet.
3. Thermal switch has
tripped.
1. Push plug into outlet until
seated.
2. Use different outlet and have
electrician replace the faulty
outlet.
3. Turn off the unit and wait
several minutes to allow the
motor to cool.

V4.0 1.45 GPM@ 1,600 PSI Electric Pressure Washer 8976904
Visitwww.princessauto.comfor more information 15
Motorsuddenly
stops.
Thermal safety switch
hastripped.
1. Turn off the unit and wait
several minutes to allow the
motor to cool.
2. Confirm thepowersupply
matches the pressure washer's
requirements (see
Specifications) before
restarting the motor.

V 4,0 8976904
Vous devezlire et comprendretoutes les instructionsavant d'utiliserl'appareil.
Conservez ce manuel afinde pouvoirle consulterplustard.
Manuel d'utilisateur
Laveuse à pressionélectrique de
1,45 gal/min à 1 600 lb/po carré

8976904 Laveuse à pression électrique V 4,0
de 1,45 gal/minà 1 600 lb/pocarré
2 En cas de questionstechniques,appelez le 1-800-665-8685
SPÉCIFICATIONS
Tensionnominale(Vca)
120
Intensitéde courant nominale(A) 11
Pression nominalemax.(lb/po carré) 1 600
Débit max.(gal/min)
1,45
Température d’admissionmax.de l’eau
(°C)
50
Température d’admission max. de l’eau
(°F) 122
Température max.de sortie del’eau (°C) 50
Température max.de sortie del’eau (°F)
122
Type d’énergie
Électrique
Type de moteur Universel
Typedepompe
Plaque oscillante axiale en aluminium
Type d’injection chimique
Canon à mousse
Taille de buse (°) 0 à 60
Type de buse
Pulvérisationvariable
Dimensionde tuyau
20 pi
Mat. de tuyau PVC
Matériau de cadre du chariot Plastique
Typederoue Plastique
Long.de cordon(pi)
35
Laveuse à pressionélectrique de
1,45 gal/min à 1 600 lb/po carré

V 4,0 Laveuse à pression électrique 8976904
de 1,45 gal/minà 1 600 lb/pocarré
Visitez www.princessauto.com pour plus d'informations 3
SÉCURITÉ
AVERTISSEMENT ! Veuillez lire et comprendre toutes les instructions avant
d'utiliser cet outil. L'utilisateur doit respecter les précautions de base
lorsqu'il utilise cet outil afin de réduire le risque de blessure ou de
dommage à l'équipement.
Conservez ce manuel qui contient les avertissements de sécurité, les
précautions, les instructions de fonctionnement ou d'inspection et d'entretien.
DÉFINITIONSDE DANGER
Veuillez-vous familiariser avec les avis de danger qui sont présentés dans ce
manuel. Un avis est une alerte indiquant qu'il existe un risque de dommage à la
propriété, de blessure ou de décès si on ne respecte pas certaines instructions.
DANGER ! Cet avis indique un risque immédiat et particulier qui
entraînera des blessures corporelles graves ou même la
mort si on omet de prendre les précautions nécessaires.
AVERTISSEMENT ! Cet avis indique un risque particulier ou une pratique non
sécuritaire qui pourrait entraîner des blessures
corporelles graves ou même la mort si on omet de
prendre les précautions nécessaires.
ATTENTION ! Cet avis indique une situation possiblement dangereuse qui
peut entraîner des blessures mineures ou modérées si on
ne procède pas de la façon recommandée.
AVIS ! Cet avis indique un risque particulier ou une pratiquenon
sécuritairequi entraînera des dommages au niveau de
l'équipement ou desbiens, maisnon des blessurescorporelles.
AIRE DE TRAVAIL
1. Travaillez dans un environnement de travail sécuritaire. Gardez votre aire
de travail propre, bien éclairée et exempte de toute distraction. Placez les
lampes de façon à ne pas travailler dans l’ombre.
2. Assurez-vous que les personnes qui ne portent pas l’équipement de
sécurité approprié ne se trouvent pas à proximité de l’aire de travail.

8976904 Laveuse à pression électrique V 4,0
de 1,45 gal/minà 1 600 lb/pocarré
4 En cas de questionstechniques,appelez le 1-800-665-8685
3. Rangez les outils inutilisés correctement dans un lieu sécurisé et sec pour
empêcher la rouille, les dommages ou un mauvais usage.
4. L’utilisation d’une laveuse à pression peut créer des flaques d’eau et des
surfaces glissantes. L’aire de travail doit présenter des inclinaisons
adéquates et un système de drainage afin de réduire les risques de chute
en cas de dérapage.
SÉCURITÉPERSONNELLE
AVERTISSEMENT ! Portez de l'équipement de protection personnelle
homologué par l'Association canadienne de normalisation(CSA) ou
l'American National Standards Institute (ANSI).
ÉQUIPEMENT DE PROTECTION INDIVIDUELLE
1. Portez toujours des lunettes antiprojections qui offrent une protection
frontale et latérale pour les yeux. L’équipement de protection des yeux
devrait être conforme à la norme CSA Z94.3-07 ou ANSI Z87.1 en fonction
du type de travail effectué.
a. Utilisez des lunettes de sécurité à aération indirecte conçues pour les
environnements humides afin de protéger vos yeux des blessures. La
pulvérisation provenant de cet appareil est sous une pression extrême
et peut causer un ricochet d’eau ou d’objets vers les yeux.
2. Portez des vêtements et des gants de protection conçus pour
l’environnement de travail, les matériaux et les outils.
3. Les chaussures antidérapantes sont recommandées pour maintenir la
stabilité et l’équilibre au sein de l’environnement de travail.
PRÉCAUTIONS PERSONNELLES
Gardez le contrôle de l’outil, de vos mouvements et de l’environnement de
travail pour éviter les blessures corporelles ou le bris de l’outil.
1. N’utilisez pas l’outil si vous êtes fatigué ou sous l’effet de drogues, d’alcool
ou de médicaments.
2. Évitez de porter des vêtements ou des bijoux pouvant s’emmêler dans les
pièces mobiles d’un outil. Gardez les cheveux longs couverts ou attachés.

V 4,0 Laveuse à pression électrique 8976904
de 1,45 gal/minà 1 600 lb/pocarré
Visitez www.princessauto.com pour plus d'informations 5
3. N’utilisez pas l’outil si vous devez étirer les bras pour vous en servir. Une
stabilité et un équilibre appropriés sont nécessaires afin d’avoir un meilleur
contrôle en cas de situations inattendues.
4. Tenez cet outil solidement avec les deux mains. L’utilisation de l’outil d’une
seule main peut causer une perte de maîtrise.
SÉCURITÉ SPÉCIFIQUE
AVERTISSEMENT! Peu importe votre aisance ou votre familiarité avec l’outil
à force de vous en servir, respectez TOUJOURS strictement les règles de
sécurité. Si vous utilisez cet outil de façon dangereuse ou incorrecte, vous
pouvez subir des blessures corporelles graves.
1. Ne contournez JAMAIS les caractéristiques de sécurité de ce produit.
2. Ne laissez PAS le pistolet pulvérisateur sans surveillance pendant le
fonctionnement de l’unité.
3. Utilisez toujours la laveuse à pression à partir d’une surface stable. Évitez
d’utiliser la laveuse à pression à partir d’endroits précaires, comme une
échelle ou un échafaud.
4. N’essayez PAS de réparer les tuyaux sous pression endommagés ou
défectueux. Remplacez-les toujours.
5. Ne réparez PAS les raccords fuyants avec un produit d’étanchéité quel qu’il
soit. Remplacez le joint torique ou le joint d’étanchéité.
6. Ne débranchez PAS le tuyau sous pression de la pompe et du pistolet
pulvérisateur alors que le système est sous pression.
7. Assurez-vous toujours que le pistolet pulvérisateur, les buses, les tuyaux et
les raccords sont correctement raccordés avant de démarrer le le moteur.
8. Ne tenez JAMAIS le tuyau ou les raccords en cours d’utilisation. Cela
pourrait permettre à l’eau sous pression de s’échapper, entraînant ainsi
des blessures.
9. Ne branchez PAS cette laveuse à pression à une source d’eau chaude. Cette
laveuse à pression a été conçue pour s’utiliser avec l’eau froide seulement.