Power Sync CS-912S User manual

INTRODUCTION
CS-912S
The KVM switch allows a single keyboard, video display monitor, and mouse to be
switched to access multiple computers. The switch provides more table space in addition to
saving the cost of multiple keyboards and monitors.
FEATURES
Access multiple PCs with one set of Keyboard, Mouse, Monitor andAudio.
Space saving and cost effective.
Front panel LEDs indicate which PC is selected.
Select PCs by using front panel SELECT button or Hot Key command.
Auto Scan Mode sequences through PC.
Supports SVGA , VGA and multi-sync Monitors, resolutions up to 2048*1536
Can switch independent KVM andAudio.
Buzz for switching confirmation.
Windows 98, Me, 2000, XP, Vista and Linux OS compatible.

SPECIFICATION
Function
Specification
Model No.
CS-912S
PC Port
2
Device Port
2 x PS/2 Device
1 x Audio Device
Cable Length
1.8 m
PC Port LED
Selected
2 x Green Color LED
Cable Connector
PC
2 x PS/2 Mini-DIN-6 Male
1 x 3.5mm Mini-Phone Stereo Jack Male (green)
1 x HDB -15 Male (blue)
KVM
1 x 3.5mm Mini-Phone Stereo Jack Male (green)
1 x HDB -15 Male (block)
KVM
Connector
Console
2 x HDB-15 Female (block)
2 x 3.5mm Mini-Phone Stereo Jack Female (green)
Keyboard
1 x PS/2 Mini-DIN-6 Female
Mouse
1 x PS/2 Mini-DIN-6 Female
Audio
1 x 3.5mm Mini-Phone Stereo Jack Female (green)
Monitor
1 x HDB-15 Female (blue)
Module Weight
100.8 g
Module Dimension (L x W x H)
110 x 66 x 22 mm
Emission
CE, FCC, C-Tick
PACKAGE CONTENTS
1 x 2-port PS/2 KVM with Audio switch
1 x User manual
2 x Cables connected

Cables included in the box
Cables:
‧PS/2 cable for keyboard and mouse ports
Mini-DIN6 male/male
‧Standard VGA cable for monitor port
HDDB15 male/male with thumbscrews
Mini-DIN6
HDDB 15

Configuration
After installation, you can either choose the “SELECT” button that leads you through
multiple computers or Hot Key controls.
The SELECT button

Keyboard Hot Key Menu:
Press Scroll Lock twice, and you will hear an audible switching confirmation tone to ensure
you are already in the Hot Key Mode (LED is blinking), then Pressing either number 1,
number 2, F1, or F2 to switch from one computer to another.
In the Auto Scan mode, the KVM switch remains on one port for 10 seconds before
switching to the next. Please notice that the mouse and keyboard control will be restricted
in the Auto Scan mode.
P.S: Escape from Hot Key Mode, if you don’t press any buttons after 4 or 5 seconds.
Note:
This KVM Switch will not detect whether a computer is on or off if the “Power On” function
is set in the Bios. Meaning, when you switch to the computer that is turned off, there will be
nothing displayed on the monitor.

Troubleshooting
Keyboard/Mouse
Q: The keyboard/mouse is not detected, error reported, or doesn’t work after boot up.
A:
Shut down the computer.
Check out cable connection and make sure they are attached properly.
Reboot computer.
Call your dealer if there are any wrong, missing, or damaged parts. Keep the carton, including
the original packing materials, to repack the KVM Switch if there is a need to return it for
repair.