POWERCOLOR Red Devil AXRX 6900XT User manual

2
3
6
5
4
8
1
7

9
A
10
B

Additional Support (Optional)
※If the graphics card has multiple BIOS switches,
you can switch to your personal preference.
1. Confirm that the computer is powered off and
switch the BIOS you want.
2. Reboot your PC.
(For additional support details, please refer to:
https://www.powercolor.com/ for specific model
support)
AMD Radeon Setting Software Installation
To take full advantage of the features and
capabilities of your Radeon Graphics products,
installing the most up-to-date Radeon Software is
recommended.
1. Radeon WattMan:
Take your gameplay to the next level by fine-
tuning your GPU voltage, engine clock, memory
clock, fan speed, and temperature.
2. Radeon™ ReLive:
Capture, stream and share your greatest
moments.
(For more support, visit: https://www.amd.com/
en/support/driverhelp)
※Requires downloading the "AMD Settings"
software included when installing the driver
AMD/Radeon driver.
Package Contents
1. Graphics Card
2. User’s Manual
System Requirements
1. Expansion Slot: Motherboard with one or more
PCI Express x16 slot.
2. Display: Monitor or other display device with
compatible connectivity to the output interface of
your graphics card.
3. Power requirement: Power Consumption differs
by model.
(For additional support details, please refer to:
www.powercolor.com/ to calculate your minimum
system power requirement.)
4. Operation System: Linux©/Windows® 10
(For additional support details, please refer to:
https://www.amd.com/en/support)
Hardware Installation
Turn off computer, switch off the PSU, and
disconnect the power cord.
Open the case.
Remove any existing graphics card (if applicable)
or PCIE slot covers.
Insert the Graphics Card into the PCIE slot.
Make sure seating is secured with the PCIE
locking mechanism in place.
Secure graphics card to the PCIE bracket with
thumbscrew.
Plug in the required external PCIE power
connectors (if applicable) from the appropriate
PC Power Supply Unit.
Close the case.
Connect the display cable into the corresponding
GPU display output port.
Power on System, booting to OS. (Removing all
drivers for your previous card and performing a
clean install of the new drivers is recommended.)
Driver Installation
1. Please download the driver.
2. Install the driver based on your product.
3. Execute the driver and follow the instruction.
Driver Installation Link
Driver for PowerColor
https://www.powercolor.com/downloads
Driver and Support for AMD
https://www.amd.com/en/support
Quick Installation Guide
A
B
1
2
3
4
5
6
7
8
9
10

其他功能
多BIOS开关切换（选择性使用）
（※如该显卡有搭载多BIOS开关，可按照个人需
求切换使用。）
1. 请确认电脑电源已关闭，切换成欲使用的
BIOS。
2. 重新开机即可。
（视产品型号而定，可参照以下网址查询：
https://www.powercolor.com）
AMD Radeon 设置软件使用指南
针对游戏，视频及显示器，可以进一步设定AMD
显卡相关功能以增进最佳体验。
1. WattMan技术
可用于即时监控，自订调整显卡性能。
2. ReLive技术
可用于画面撷取，录制，游戏直播，支援游戏串
流。
（可参照以下网址查询：https://www.amd.
com/zh-hans/support/driverhelp）
※请确认安装驱动程序时包含此软件项目
“AMD设置”。
产品包装内容
1. 显卡。
2. 使用手册。
设备规格要求
1. 主板：须具备一组PCI Express x16插槽。
2. 显示器：须与显卡的输出接口兼容。
3. 电源：须符合官方最低电源供应（W）。
（视产品型号而定，可参照以下网址查询：
https://www.powercolor.com)
4. 操作系统：Linux©/Windows®10。
（视产品型号而定，可参照以下网址查询：
https://www.amd.com/en/support)
硬件安装
请确认电脑电源已关闭，然后拔掉电源线。
取下机箱外盖。
选择欲安装的显卡插槽，并移除机箱的金属后档板。
将显卡插入插槽（拿取时避免手指压到风扇）。
确定显卡完整固定。
锁上档板螺丝。
如果显卡有外接电源插孔，请从电源供应器插上对
应的外接电源线。
装回机箱外盖。
连接显示器线材到显卡输出接口。
连接电源线后将电脑开机。
（※如果您的电脑已装载其它显卡，请先卸载其它显
卡驱动程序，并将原显卡从您的电脑中移除。
驱动程式安装
1. 前往驱动程式下载连结。
2. 选择欲安装的产品型号并下载驱动。
3. 下载完成后，执行该档案以启动安装程式，并按照操
作指示完成驱动安装。
驱动程式下载连结
PowerColor下载专区
https://www.powercolor.com/cn/downloads
AMD 驱动程式和支援
https://www.amd.com/zh-hans/support
快速安装指南
A
B
1
2
3
4
5
6
7
8
9
10