Powercore E43B User manual

宽120mm 高110mm
Instructions
Product manual
Strong magnetic Smart chipSafety protectionDigital DisplayMade In China
*Please charge the battery at least once every 3 months if it will not be used
for a long time. During the use of this device, it will be slightly hot, but it is
normal that it is not hot.
*Always keep the product dry and do not use chemical agents for cleaning
and scrubbing. Please take care of the environment, recycle this device at
the designated location, and do not dispose of it arbitrarily.
*Children or persons who are not equipped to use this device alone must
use this device under the supervision of an adult.
*Do not bump, disassemble, pierce, crush, or expose this device to moisture.
*Do not apply this power bank to devices that do not meet the output
parameter requirements, it may cause malfunction or fire.
Precautions
FAQ
★When the power bank cannot be charged:
★When the power bank cannot charge other devices:
Please check whether the power adapter is suitable, the connector used,
and whether the converter is normal.
It is recommended to choose a suitable brand of power adapter for charging.
The power bank is too low, please charge it before using it.
If the internal circuit of the power bank is faulty, please contact the after-sales
service department of the local dealer for help.
1. Check the remaining battery
Click the switch button, the digital display of the power in the screen is on,
and the number corresponds to the displayed power.
2. Check the charging function:
Click the switch button to turn on the mobile power digital display to display
the current battery power. When the input current is used to charge the
mobile power, the digital display will jump, and it will stop beating when fully
charged, and a green lightning symbol will be displayed to indicate that it is
in a fast charging state. When it is detected that a device is being charged,
the digital display will jump until the power is exhausted and the digital
display will turn off.
3. Switch function
Click the switch button, the wireless function starts working; double-click
the switch, stop working.
Power bank function description
4. Stand use
There are grooves on both sides of the OPEN word on the back of the
product.When using it, drag the magnetic bracket above to make it at the
upper end.Drag to the bottom side of the triangle to use the stand.
1. Can be used as a magnetic wireless power bank, compatible with
Apple 12/13 series mobile phones.
2. Can be used as a universal wireless charging power bank, compatible
with all mobile phones that support the QI wireless charging protocol.
Support wireless charging mobile phones such as OPPO、HUAWEI、
Xiaomi、SAMSUNG.
3. Can be used as a portable and compact mobile power supply,
supporting more than 99% of mobile phone charging.
4. It can be used as a wireless charger, put it on the desktop, and charge
it whenever you put it.
5. Can be used as a mobile phone stand,Horizontal and vertical
placement, free vision.
15W wireless output, magnetic wireless fast charging
PD+QC22.5W fast charge
It can be charged and discharged at the same time, and the mobile
phone and power bank can be quickly charged at the same time
LED digital display power screen, accurate display of power
High-quality polymer batteries, safe and worry-free
Product Performance
Specifications
Power bank*1
Instruction manual *1
Charging cable*1
Packaging List
User guide
Magnetic suction
wireless output
Remarks: Description of wireless charging functions
*Place the phone on the wireless charger, click the switch button to turn on
the wireless charging function.
*When using the charger to charge the mobile power supply and using the
wireless charging function to charge the device at the same time, only the
ordinary 5W wirelessLine charging function.
*During the charging process of the mobile power supply, in a fully charged
state, since the charging protocol is switched to the 5V input state, it is
turned on at this time.In wireless charging mode, only ordinary 5W charging
can be performed. When you stop charging the power bank, it will restart
automatically, andWireless charging can enter fast charging mode.
*When using PD12V charger to charge the power bank, because this function
does not support 12V power supply, wireless chargingfeature will be turned
off.
NameMagnetic wireless power bankProduct modelType of cellLithium polymer batteryType-C outputType-C inputUSB outputWireless outputProduct SizeExecutive standardOperating temperatureE43B105*66.5*20.2±0.1mmType-C out/inputBracketON/OFFBattery display screenUSB output

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is Subject To the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Changes or modifications not
explicitly approved by the party responsible for compliance could void the user's authority to operate
this equipment.
Note: this equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and candidate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
During the operation of device a distance of 0 cm surrounding the device and 0 cm above the top
surface of the device must be respected.
● Increase the separation between the equipment and any other radio device.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.