Powercraft PSC-360/2L Technical manual

User Guide & Warranty
3.6V LITHIUM-ION SCREWDRIVER
After Sales Support
Now you have purchased a Power Craft
product you can rest assured in the
knowledge that as well as your 3 year
parts and labour warranty you have
the added peace of mind of dedicated
helplines and web support.
AFTER SALES SUPPORT
UK / N.IRELAND HELPLINE NO 0870 7323023
REP. IRELAND HELPLINE NO 1800 481005
WEB SUPPORT www.omegawolf.com/powercraft
MODEL NUMBER: PSC-360/2L
In order to deal with your enquiry as quickly and efficiently as possible, we ask you to send your
enquiry by email ([email protected]). Do not forget to include your name, address and a
daytime telephone number.
Alternatively, you can contact our freephone service hot-line on the number given below.
Office hours are as follows:
Mon - Fri: 8 am - 6 pm, Sat: 10 am - 2 pm, Sun: 10 am - 4 pm
UK / NORTHERN IRELAND HELPLINE:
0870 7323023
REPUBLIC OF IRELAND HELPLINE:
1800 481005
WEB SUPPORT:
www.omegawolf.com/powercraft
Omega, Interex House, Prospect Close, Lowmoor Business Park
NG17 7LF Kirkby In Ashfield, England
Replacements or repairs under guarantee regulations are free of charge.
GB/IRE-0709-21
Name:
Address:
Contact Telephone No.:
E-mail:
Location of purchase:
Fault Description:
If you are requested by the manufacturer to return the item for
repair please complete the enclosed section and send it together
with your product and your receipt (proof of purchase) to the
service address shown below.
3.6V LITHIUM-ION SCREWDRIVER
PSC-360/2L

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 19
Warranty
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L
02
Contents
03 Introduction
05 Machine specifications
07 Safety instructions
- General Safety Instructions
- Additional safety instructions
11 Assembly
- Inserting and removing bits
12 Operation
- Locking the screwdriver
- Screwdriving
- User tips for optimum use
-Charging the Lithium-ion battery
15 Maintenance
19 Warranty
WARRANTY CERTIFICATE
Year of manufacture: 12/2007 SCREWDRIVER PSC-360/2L
Congratulations! You have made an excellent choice with the purchase of this Quality
product. Our commitment to quality also includes our service. Should you, contrary to
expectations, experience defects due to material or manufacturing faults during private use
within 36 months of the date of purchase we shall be liable for warranty in accordance with
statutory warranty regulations, provided that: - The device was not put to any use other than the intended.-
Was not overloaded. - Was not used with the wrong accessories. - Repairs where not carried out by any
other than the authorised workshop. The warranty certificate is only valid in connection with the receipt.
Please keep both in a safe place. The warranty does not affect your statutory rights.
The product is guaranteed for a period of three years beginning on the day of purchase. Keep your purchase
receipt safe as proof of the date of purchase. The guarantee period can only be extended for the duration of
any repair required.
During the warranty period, defective devices can be sent FREIGHT PREPAID to the service address stated at
the end of this booklet. We will, at our discretion either repair or exchange the device in accordance with
warranty legislation.
Please include the following when sending in your product for repair:
1. The receipt (proof of purchase)
2. This warranty certificate with your name, address, contact details and a fault description
completed overleaf.
If the original receipt is not enclosed the repair will be charged for in all cases. After the warranty has
expired you can still send defective devices for repairs FREIGHT PREPAID to the address at the end of this
booklet. Quotes as well as repairs after warranty period are to be paid for in all cases. Ensure the product is
sent well packed as no responsibility can be accepted for items lost or damaged in transit. This warranty
does not affect your statutory rights.
EC DECLARATION OF CONFORMITY
We Ferm B.V.
Lingenstraat 6, 8028 PM Zwolle, The Netherlands
declare that the design and construction of the following machine, in the form supplied by us, comply with
the requirements of the appropriate EC directives.
Product Description: 3.6 Lithium-ion SCREWDRIVER
Model: PSC-360/2L
Appropriate EC directives: EN60745-1:2003+A1; EN60745-2-2:2003; EN55014-1:2000+A1+A2;
EN55014-2:1997+A1; EN61000-3-2:2000; EN61000-3-3:1995+A1; EN60335-1:2002+A1+A11;
EN60335-2-29:2004; EN50366:2003
Applicable harmonised norms: 98/37/EC, 73/23/EEC, 89/336/EEC, 2002/95/EC, 2002/96/EC
J.A. Bakker - van Ingen J. Lodewijk
CEO Ferm B.V. Quality Manager Ferm Global 12/2007

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 03
Introduction
Congratulations on choosing to buy a Power
Craft product.
By doing so you now have the assurance and peace of mind that comes with
purchasing a product made by one of Europe’s leading manufacturers.
All products brought to you by Power Craft are manufactured to the highest
standards of performances and safety, and, as part of our philosophy for
customer service and satisfaction, are backed by our comprehensive
3 Year Warranty.
We hope you will enjoy using your purchase for many years to come.
3.6V Lithium-ion Screwdriver
Always read the instructions for electrical products carefully before
use. It will help you understand your product better and avoid
unnecessary risks. Keep this instructions manual in a safe place for
future use.
This screwdriver is intended for tightening and loosening screws (fig. 1-5).
The screwdriver is not suitable for screwdriving heavy constructions, e.g.
repairing a large fence.
Fig. 1 Fig.2
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 18

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 17
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 04
Introduction
Fig. 3 Fig.4
Fig. 5

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 05
Machine specifications
Technical specifications
Product information
Fig.6
Charger output 3.6 V / 750 mA
Charger input 240 V / 50 Hz
Battery capacity 1.1 Ah
Charging time < 5 hours
Max. torque 3.0 Nm
No-load speed 230 rpm
Weight 380g.
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 16
1
7
2
8
4
3
5
76

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 15
Maintenance
This machine has been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
Cleaning
Regularly clean the machine housing with a soft cloth, preferably after each
use. Keep the ventilation slots free from dust and dirt. If the dirt does not
come off use a soft cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These solvents may damage the
plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, please contact either the address, the email address or
the helpline number on the warranty card.
Environment
In order to prevent the machine from damage during transport, it is delivered
in a sturdy packaging. Most of the packaging materials can be recycled. Take
these materials to the appropriate recycling locations.
Faulty and/or discarded electrical or electronic machines have to
be collected at the appropriate recycling locations.
Do not dispose of the power tool or the battery into household waste, fire or
water.
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 06
Machine specifications
1. Bit holder
2. On/Off-switch
3. Softgrip
4. LED (red)
5. Charger connection
6. Extension piece
7. Bit
8. LED (white)
Package contents
1 Cordless screwdriver
1Charger
1 Magnetic bit holder
18 Accessories
1 Instruction manual
1 Warranty card

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 07
Safety instructions
The following symbols are used in these instructions:
Read the instructions carefully.
Conformity with the relevant EU safety directives.
Class II machine- double insulation- earth connection not required.
Danger of life and risk of injury as well as risk of damage to the
machine in case of non-adherence to the safety instructions in
these instructions of use.
Danger of electric shock.
Device can rotate in both directions.
Indoor use only
In case of failure, the transformer is not dangerous.
Thermic protector.
Faulty and/or discarded electrical or electronic machines have to
be collected at the appropriate recycling locations.
Do not use in damp and wet conditions.
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 14
Operation
Charging Lithium-ion battery
Fig. 10
The battery charger supplied is matched to the Lithium-ion battery installed
in the machine. Do not use another battery charger.
The Lithium-ion battery is protected against excessive discharging. When the
battery is empty, the machine is switched off by means of a protective circuit:
the tool holder no longer rotates. Caution: if the On/Off switch is subject to
continued use, the Lithium-ion battery can be damaged.
The charging procedure starts as soon as the mains plug of the battery
charger is inserted into the socket and the adapter plug is connected to the
appliance (the underside of the handgrip).
• Put the adapter plug of the charger into the handle (underside)
• Plug the mains adapter into the (wall) socket
• The charging process starts; the red LED is now on
• The battery is fully charged when the red LED goes out.
•Charging the battery takes a maximum of 5 hours.
• During the charging procedure, the handgrip of the machine warms
up.This is normal.

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 13
Operation
Warning! Looking straight into LED light for a prolonged period of
time from close distance can cause damage to the eyes.
User tips for optimum use
Fig. 9
•Always hold the tool and screwdriver bit in a straight line with the screw
and always use the correct type and size of bit.
•If screws are difficult to tighten, try applying a small amount of washing
liquid or soap as a lubricant (Fig. 9).
• Use the spindle lock feature to loosen very tight screws or to firmly
tighten screws.
• When screwing in wood, it is recommended to drill a hole with a depth
equal to almost the length of the screw. A pilot hole guides the screw and
prevents splintering or distortion of the work piece.
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 08
Safety instructions
General Safety Instructions
Caution! Read all instructions. The non-observation of the instructions
mentioned below may cause an electric shock, fire and/or severe injuries. The
term “electric tool” mentioned below refers to mains-operated electric tools
(with a power cord) and to rechargeable electric tools (without power cord).
Keep these instructions for use in a safe place.
1) Workplace
(a) Keep your workplace clean and tidy. Untidy and badly illuminated work
areas may lead to accidents.
(b) Do not operate this machine in potentially explosive environments
containing combustible liquids, gases or dusts. Electric tools send out
sparks which may ignite dust or vapours.
(c) Keep children and other persons away from the electric tool during use.
When distracted, you may lose control over the apparatus.
2) Electric safety
(a) The plug of the machine has to be suitable for the socket. The connector
may not be modified in any way. Do not use an adapter plug together
with earthed devices. Unchanged connectors and fitting sockets reduce
the risk of an electric shock.
(b) Avoid body contact to earthed surfaces, such as pipes, radiators, stoves and
refrigerators. There is a higher risk of an electric shock, if your body is
earthed.
(c) Keep the machine clear of rain or humidity. The penetration of water into
an electrical device increases the risk of an electric shock.
(d) Do not use the cable for unintended purposes, to carry or suspend the
machine or to pull the connector out of the socket. Keep the cable clear
of heat, oil, sharp edges or any moving parts. Damaged or entangled
cables increase the risk of an electric shock.
(e) When using an electric tool in the open, use an extension cable only
which has been approved for outdoor use. The use of an extension cable
suitable for use in the open will reduce the risk of an electric shock.
Always use an RCD (redicual circuit device or circuit breaker).
3) Personal safety
(a) Please pay attention and watch what you are doing, and carry out the
work with the electric tool sensibly. Do not use the machine, when you are
tired or under the influence of drugs, alcohol or medicine. A moment of
carelessness in the use of the machine could lead to serious injuries.

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 09
Safety instructions
(b) Wear your safety equipment and always put on safety goggles. Wearing
personal protective gear, such as a dust mask, anti-skid safety shoes, hard
hat and ear protection, depending on the use of the electric tool, will
reduce the risk of injury.
(c) Avoid unintentional operation. Make sure that the switch is in the “OFF”
position before you remove the plug from the socket. If you have your
finger on the switch when carrying the machine or if you connect the
running machine to the socket, this may lead to accidents.
(d) Remove the adjusting tools or the spanners before switching on the
machine. A tool or a key which is located in a revolving part of the
machine may lead to injuries.
(e) Concentrate and keep your balance at all times as you will be able to
control the machine better in unexpected situations.
(f) Wear suitable clothing. Do not wear any loose clothing or jewellery. Keep
your hair, clothing and gloves clear of any moving parts.
(g) If dust extraction or collection devices can be mounted, make sure that
they are connected properly and are used in the proper way. The use of
these pieces of equipment reduce hazards caused by dust.
4) Careful handling and use of electric tools
(a) Use the correct tool for the job at hand.
(b) Do not use an electric tool, if the switch is defective. An electric tool,
which cannot be switched on or off, is dangerous and has to be repaired.
(c) Remove the plug from the socket before setting down the machine,
changing accessories or putting the machine aside. This precautionary
measure prevents the unintentional start of the machine.
(d) Keep unused electric tools out of reach of children. Do not permit persons
to use the machine who are not familiar with it or who have not read
these instructions. Electric tools are dangerous, if they are used by an
inexperienced person.
(e) Maintain the machine with care. Please check whether the movable parts
are perfectly operational and do not jam, whether parts have broken or
have been damaged in such a way that the function of the machine is
impaired. Have damaged parts repaired prior to using the machine. Many
accidents are caused by electric tools which are poorly maintained.
(f) Keep all cutting tools sharp and clean.
(g)Use the electric tool, the accessories, the insert tools, etc according to these
instructions, and in the way described for this special type of apparatus. In
the process, take the working conditions and the work to be carried out into
consideration. Only use this tool for the purpose for which it is intended.
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 12
Operation
Always observe the safety instructions and applicable regulations.
Firmly hold the machine and fasten the bit with even pressure into the
workpiece. Do not force the machine. Use only bits that do not yet show any
signs of wear. Worn bits have a negative effect on the efficiency of the
machine.
Locking the screwdriver
Fig. 8
The screwdriver is fitted with an automatic spindle lock feature. When the
On/Off switch (2) is not pressed, the spindle is locked. Now it is possible to use
the screwdriver (even when the battery is empty) as a manual tool.
Screwdriving
Fig. 6 (page 5)
To switch the tool on, press the On/Off switch (2).
-Press the tumbler switch (R) for clockwise rotation (tightening screws)
- Press the tumbler switch (L) for counterclockwise rotation (loosening
screws)
To switch the tool off, release the on/off switch.
The white LED will illuminate when the tumbler switch is pressed.

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 11
Assembly
Inserting and removing bits
Fig. 6 (page 5) + 7
The bits can easily be placed directly into the bit holder or onto the extension
piece. The extension piece can be used for screws that are difficult to reach.
Fig.7
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PSC-360/2L 10
Safety instructions
(h) Use clamps or vice to hold work. It is safer then using your hands and
frees both hands to operate the tool.
5) Servicing
(a) Have your machine repaired by qualified expert staff using original spare
parts only.
(b) Caution! The use of accessories or add-on devices other than those
recommended in these instructions may mean a risk of injury. Use original
spare parts only.
Additional Safety Instructions
1. Only use the accumulator block with the battery charger provided – using
other chargers could be dangerous.
2. Keep the accumulator block, tool and battery charger away from damp
and wet conditions.
3. Before using the battery charger, check all wires are properly connected.
4. If any wires on the charger are damaged, do not use it until these have
been replaced.
5. When the charger is not in use it should not be plugged in. When
unplugging, do not pull the plug out by the cable.
6. If the charger breaks down or suffers from other technical problems, take
it to a recognised dealership to be checked before using it again. Any
damaged parts must be replaced.
7. Take care when handling the accumulator block, do not drop it or knock it
against other things.
8. Never attempt to repair the battery charger or accumulator block yourself
as this can be extremely dangerous. Repairs should always be carried out
by a recognised dealership.
9. Always unplug the charger before cleaning or carrying out any other
maintenance on it.
10. Do not attempt to charge the accumulator block in temperatures of
below 5 °C or above 40 °C.
11. Never throw the accumulator block into water or a fire – it may explode.
12. Turn the screwdriver immediately off after the screw is fastened.
Overloading and damaging the battery or motor can be prevented this
way. Use the torque to loosen the fastened screw.