31A Belt Disc Sander
The Gold Standard Since 1921.
Loaded with features, the new
31A from Powermatic can tackle
the most demanding tasks. Full
cast iron construction allows both
metal and woodworking to be
done on the same machine and
the Integral Dual Dust Port keeps
both belt and disc portions clean,
extending abrasive life. ■The
articulating table mounted on
the 6"x 48"belt sander head can
be used vertically, horizontally,
or angled to accommodate
any job. The belt head has an
indexing pin with stops at 0, 45
and 90 degrees and the head
lock allows use at any angle in
between. ■Removing the top
guard facilitates contour sanding
and the cast iron tables with
miter gauge slots and positive
stops make set-up fast, accurate,
and simple for any angle.
FEATURE
11/2HP motor
Heavy cast iron construction
Multi-position belt head with
indexing pin and head lock.
Locks at 0, 45 and 90 degrees
Table for belt head tilts 0 to 45
degrees downward with miter
gauge slot and is adjustable for
various angles
Full steel construction integral
dust collection for both belt
and disc
Fast tensioning and quick
tracking knobs
Removable top guard
Full cast iron platen with solid
crowned aluminum drums
12" balanced disc with tilt table
+15 degrees to -45 degrees
with miter slot
BENEFIT
Provides plenty of power for any
sanding operation
Designed for metal and woodworking
applications, minimized vibration
No need for tools to change belt
position from vertical to horizontal
and locks in any setting in between
Configures for both vertical and
horizontal use and allows for compound
angle sanding as well as backstop or
edge work
Accommodates both metal and
woodworking, keeps work areas
clear and prolongs abrasive life
Allows quick abrasive changing
and tracking
Allows for contour sanding
Insures steady belt tracking with no
heat build-up
Accurate for pattern work and versatility
Both the belt and disc
tables are precision
ground cast iron and
accommodate a full range
of angles.
Patented articulating table
mounted on the belt side
can be used as backstop
fence, tilt table or skewed
for edge work.
Removal of top drum
guard allows for more than
straight or angle sanding.
WMH TOOL GROUP
