POWERMOD BPCPAP12V-KT User manual

Operation Manual
BPCPAP12V-KT
12V CPAP & BPAP Battery Kit
BPCPAP24V-KT
24V CPAP & BPAP Battery Kit
CPAP &BPAP Battery Kit

2
Table of Contents:
12V CPAP & BPAP BATTERY KIT
Package Contents 3
Product Specifications 3
Control Panel 3
Intended Use 4
Before Use 4
Power Status 4
Low Power Alarm 5
Low Power Status 5
USB Port 5
Using The Battery Pack 6
Using the Battery as a Portable Power Supply 6
Using the Battery as a Backup Power Supply 6
Using the In-Vehicle Power Supply 7
Using a Second Battery Pack 7
Warnings 7
24V CPAP & BPAP BATTERY KIT
Package Contents 8
Product Specifications 8
Control Panel 8
Intended Use 9
Before Use 9
Power Status 9
Low Power Alarm 10
Low Power Status 10
USB Port 10
Using The Battery Pack 11
Using the Battery as a Portable Power Supply 11
Using the Battery as a Backup Power Supply 11
Using the In-Vehicle Power Supply 12
Using a Second Battery Pack 12
Warnings 12

12V CPAP & BPAP BATTERY KIT
Package Contents: Powermod CPAP & BPAP Battery Kit
Product Specifications:
1) 1- 12V CPAP/BPAP Battery
2) 1- Output Cable for Respironics M Series 12V
3) 1- Output Cable for Respironics System One Series 12V
4) 1- Output Cable for Respironics Dream Station Series 12V
5) 1- Output Cable for ResMed S8™Series 12V
6) 1- Output Cable for DeVilibiss Intelli Pap Series 12V
7) 1- AC/DC Power Supply
8) 1- In-Vehicle Power Supply
9) 1- Carrying Case for Battery
Dimensions: Size: 7.5” x 4.88” x 0.88” (L x W x H)
Weight: 1lbs
Cell Type: Lithium-Ion
Capacity: 100Wh
Input: 13V/6.92A
Output: 12V/6.67A
USB: 5V/2A
A) DC In Port
B) On/Off Switch
C) Power Level Button
D) Power Indication Meter
E) USB Out Port
F) DC Out Port
A B C D E F
Control Panel:
DC IN USB OUT DC OUT
OFF ON
3

12V CPAP & BPAP BATTERY KIT
Intended Use:
The Powermod CPAP & BPAP Battery Kit is intended to be used with the
following CPAP and BPAP models:
Respironics M Series 12V
Respironics System One Series 12V
Respironics Dream Station Series 12V
ResMed S8™Series 12V
DeVilibiss IntelliPap Series 12V
Manufacturer is not responsible for damage done by the battery to any other device not listed above.
The additional USB port can be used to charge other electronic devices such as smartphones, tablets
and music players. Please review instruction manual for specific devices to ensure that it is compatible
with the 5V/2A output that is provided by the Powermod CPAP & BPAP Battery Kit.
Please note that this product may be used to power the CPAP and BPAP machines listed above while
traveling via air. Please contact the airline that you will be traveling with to register your device and
confirm that you are able to use the product inflight. Some restrictions may apply depending on the
airline you are traveling with.
Before using the Powermod CPAP & BPAP Battery Kit you will need to fully charge the battery.
Make sure that the on/off switch is turned to off. Plug in the AC/DC Power Supply included in the kit
into the DC IN port on the battery. Then plug the AC/DC charger into the power outlet. Please note that
it will take 3-4 hours to fully charge the battery pack. The battery pack is fully charged when all 4 LED
lights are solid green. Note that after you fully charge the battery the first time, you may charge the
battery with the On/Off switch in either the On or Off position.
The LED display indicates the power level of the battery pack. To check the power level of the battery
press the power level button. One solid green LED light means the battery is 25% charged, two solid
green LED’s means the battery is 50% charged, three solid green LED’s means the battery is 75%
charged and 4 solid green LED’s means the battery is fully charged.
4
Before Use:
Power Status:
DC IN USB OUT DC OUT
OFF ON
DC IN USB OUT DC OUT
OFF ON
DC IN USB OUT DC OUT
OFF ON
DC IN USB OUT DC OUT
OFF ON
25% Charged
75% Charged
50% Charged
100% Charged

12V CPAP & BPAP BATTERY KIT
Low Power Alarm:
The battery pack has two different settings to indicate the battery is below 5% charge.
1.) The default setting is to have a loud beep sound when the battery is below 5% charge remaining.
2.) The second setting is to have the LED blink with no sound when the battery is below
5% charge remaining.
To switch modes:
• Turn the on/off switch to off.
• After the battery is off, then press and hold the power level button for about 4 seconds.
• If you hear the beep sound after 4 seconds, then the battery back is in the mode to sound the alarm.
• If you see the LED flash, then the battery back is in the mode to have the LED flash without sound.
The battery pack is set to go into low power mode if it is powered on and there is no
current being drawn or if it is less than 5W being used.
When the battery pack is in low power mode, the red LED will flash once every 4 seconds.
Once the battery pack has entered low power mode it will not provide power to your
CPAP or BPAP machine, but the USB output port will still provide power.
In order for the battery pack to start providing power again, you will need to turn the On/Off switch
to Off and then back to On. This will trigger the battery to leave low power mode and provide power.
When the battery pack signals the lower power alarm, you can release the low power alarm sound by
pressing the Power Level Button. This will stop the alarm from sounding. If you are in the LED alert
mode, then the LED will continue to flash until the battery pack is charged or the On/Off switch is turned
to the Off position.
The USB port can be used to charge other electronic devices such as smartphones, tablets and
music players. Please review instruction manual for specific devices to ensure that it is compatible
with the 5V/2A output that is provided by the Powermod CPAP & BPAP Battery Kit.
5
Low Power Status:
USB Port: