Pramac HX10M User manual

HX10M 1150X540
HIGH LIFT PALLET TRUCK - MANUAL
HX10 M
The HX10M scissor lift makes possible an easy and light lifting to a height of 800 mm,
becoming a practical work platform, suitable for places such as machine workshops.
This pallet truck is also able to carry out the support function and material
supply along the assembly and production lines.
CONTROL LEVER
The handle offers an ergonomic tiller and a 3 positions control lever.
The special lowering valve allows you to smoothly lower the load.
HYDRAULIC UNIT
Resistant and reliable one piece cast iron pump including:
•TWO-STAGE TELESCOPIC LIFTING PISTON: to allow working with low profile frame
granting lightness and better operator visibility.
•MAXIMUM PRESSURE VALVE: safety device that ensures the transpallet against
overloads. When the pressure inside the hydraulic circuit exceeds the set calibration
value according to the maximum nominal flow, the valve automatically locks the forks.
•PROPORTIONAL LOWERING VALVE: lowering speed can be proportionally
controlled according to the lever position on the tiller. Perfect working tool to carry
fragile and delicate loads like crystal, glass and ceramics.
FRONT AND REAR STABILIZERS
The new control linkage makes possible the entry on the closed side of the pallet by a
slight lifting, which facilitates the successive handling phases.
Furthermore, greater machine stability is achieved by using load rollers in a more
advanced position and providing front stabilizers as standard.
Work is made even more stable and safer with the rear stabilizers, also when the
working height exceeds the 400 mm and in the case of heavy objects.

CONFIGURATION
STANDARD:
Nylon polyurethane steering wheels and polyurethane rollers.
Quick lift. The perfect tool to lift quicker your loads up to 150 kg. The hydraulic pump
is specifically engineered to cut by half the job time and increase efficiency.
OPTIONAL:
Rubber steering wheels

Description
1.1 Manufacturer LIFTER
1.3 Drive Manual
1.4 Operator type Pedestrian
1.5 Load capacity QKg 1000
1.6 Load centre distance cmm 600
1.8 Load axle to end forks xmm 993
1.9 Wheel base ymm 1231
Weights
2.1 Service weight (battery included) Kg 104
2.2 Axle load, laden rear Kg 713
2.2 Axle load, laden front Kg 391
2.3 Axle load, unladen front Kg 71
2.3 Axle load, unladen rear Kg 33
Tyres/Chassis
3.1 Tyres: front wheels POLY.I./
NYLON
3.1 Tyres: rear wheels POLY.I.
3.2 Tyre size: Steering wheels - Width mm 45
3.2 Tyre size: Steering wheels - Diameter mm 200
3.3 Tyre size: Load rollers - Diameter mm 80
3.3 Tyre size: Load rollers - Width mm 50
3.5 Tyre size: rear wheels - Q.ty (X=driven) nr 2
3.6 Tread, front b10 mm 155
3.7 Tread, rear b11 mm 447
Dimensions
4.4 Lift height h3 mm 715
4.9 Height of tiller in drive position max h14 mm 1250
4.9 Height of tiller in drive position min h14 mm 415
4.15 Height, lowered h13 mm 85
4.19 Overall lenght l1 mm 1526
4.20 Lenght to face of forks l2 mm 376
4.21 Overall width b1 mm 540
4.22 Fork dimensions - Thickness smm 48
4.22 Fork dimensions - Width emm 160
4.22 Fork dimensions - Lenght lmm 1150
4.25 Distance between fork arms b5 mm 540
4.32 Ground clearance, centre of wheelbase m2 mm 21
4.34 Aisle width Ast mm 2019
4.35 Turning radius Wa mm 1369
Performance data
5.2 Lifting speed laden m/s 62
5.2 Lifting speed unladen m/s 30
5.3 Lowering speed laden m/s 0.06
5.3 Lowering speed unladen m/s 0.04

The information is aligned with the Data file at the time of download. Printed on 01/09/2020 (ID 626)
©2019 | PR INDUSTRIAL s.r.l. | All rights reserved | Image shown may not reflect actual package.
Specifications subject to change without notice