Genie GS-2668 RT User manual

Parts Manual
Serial Number Range
Service Manual
Part No. 112657
Rev C2
July 2011
Serial Number Range
GS-2668 RT from GS6805-44771
GS-3268 RT from GS6805-44771

June 2007
GS-2668 RT • GS-3268 RT Part No. 112657
ii
Important
Read, understand and obey the safety rules and
operating instructions in the appropriate Operator's
Manual on your machine before attempting any
maintenance procedure.
Basic mechanical, hydraulic and electrical
skills are required to perform most procedures.
However, several procedures require specialized
skills, tools, lifting equipment and a suitable
workshop. In these instances, we strongly
recommend that maintenance and repair be
performed at an authorized Genie dealer
service center.
Compliance
Machine Classification
Group A/Type 2,3 as defined by ISO 16368
Machine Design Life
Unrestricted with proper opeation, inspection and
scheduled maintenance.
Technical Publications
Genie Industries has endeavored to deliver the
highest degree of accuracy possible. However,
continuous improvement of our products is a Genie
policy. Therefore, product specifications
are subject to change without notice.
Readers are encouraged to notify Genie of errors
and send in suggestions for improvement. All
communications will be carefully considered for
future printings of this and all other manuals.
Copyright © 1998 by Genie Industries
112657 Rev C June 2007
Second Edition, Third Printing
"Genie" is a registered trademark of Genie
Industries in the USA and many other countries.
"GS" is a trademark of Genie Industries.
Printed on recycled paper
Printed in U.S.A.
Introduction
Serial Number Information
Genie Industries offers the following Service
Manuals for these models:
Title Part No.
Genie GS-2668 RT and GS-3268 RT
Service Manual, First Edition
(from serial number 101 to GS6805-44770) ......... 52302
Contact Us:
www.genieindustries.com
e-mail: [email protected]

June 2007
Part No. 112657 GS-2668 RT • GS-3268 RT
iii
INTRODUCTION
GS30 05 A - 12345
Model
Facility code
(
)
used only for model manufactured
in multiple facilities
Sequence
number
PN - 77055
Model:
Model year: Manufacture date:
Maximum allowable inclination of the chassis:
Country of manufacture: USA
This machine complies with:
Serial number:
Rated work load (including occupants):
Genie Industries
18340 NE 76th Street
Redmond, WA 98052
USA
Electrical schematic number:
Gradeability:
Maximum allowable side force :
Maximum number of platform occupants:
Machine unladen weight:
ANSI A92.6-1999
B354.2-01
GS-1930
GS3005A-12345
04/12/05
ES0141
2,714 lb / 1,231 kg
500 lb / 227 kg
N/A
N/A
100 lb / 445 N
2
2005
Model year
Serial label
(inside cover)
Serial number
(stamped on chassis)
Serial Number Legend

June 2007
GS-2668 RT • GS-3268 RT Part No. 112657
iv
This page intentionally left blank.

June 2007
Part No. 112657 GS-2668 RT • GS-3268 RT
v
Danger
Failure to obey the instructions and safety rules
in this manual and the appropriate Operator's
Manual on your machine will result in death or
serious injury.
Many of the hazards identified in the
operator’s manual are also safety hazards
when maintenance and repair procedures
are performed.
Do Not Perform Maintenance
Unless:
You are trained and qualified to perform
maintenance on this machine.
You read, understand and obey:
- manufacturer’s instructions and safety rules
- employer’s safety rules and worksite
regulations
- applicable governmental regulations
You have the appropriate tools, lifting
equipment and a suitable workshop.
Section 1 • Safety Rules
Safety Rules