Premier Mounts MVWS-3X3 Series User manual

Modular Video Wall HeadersInstallation
North America 800.368.9700 | International [phone] | www.mounts.com
Lifting Shackle (Qty. 4)
ying header assembly
1/2”-13 Washer (Qty. 8)
1/2”-13 Bolt (Qty. 8)
1/2”-13 Nut (Qty. 8)
Lifting Shackle (Qty. 2)
ying header assembly
1/2”-13 Nut (Qty. 6)
1/2”-13 Washer (Qty. 6)
1/2”-13 Bolt (Qty. 6)
1
*Hardware and components for hanging are not provided with header.
MVWS-3X3 SERIES
MVWS-2X2 SERIES
Note: properly qualied installation personnel and hardware are strongly recommend
when ying video walls to ensure proper compliance with local codes.

North America 800.368.9700 | International [phone] | www.mounts.com 2
Base Assembly
If available, the oor base assembly will aid greatly
in the installation and alignment of the displays on
the wall frame prior to ying the wall.
There are 5 mounting holes available for attaching
the shackles to provide dierent angles of tilt. The
second hole from the front will hang the straightest
in most cases.
Install the header to the top of the video wall.
Step 1

North America 800.368.9700 | International [phone] | www.mounts.com 3
1/2”-13 Bolt
1/2”-13 Washer
1/2”-13 Nut
Step 2
Step 3
Warning
Secure the head using the 1/2-13” bolts, washer and
nuts.
Note: Use only the grade eight hardware supplied to
mate the header assembly to the top of the wall
frame! Using lower grade hardware could compromise
the integrity and safety of the installation.
With the displays installed and aligned per the rst
section of this manual, the video wall is ready to
be suspended using the customer supplied
suitable rigging hardware and qualied personal
to y the completed video wall system.
If you are not using the base assembly shown
above during the assembly of the wall system, the
displays must be positioned so that the lowest
row of displays sits above the bottom of the video
wall. Positioning the bottom of the displays lower
than the bottom of the video wall will severely
damage the displays when lowered to the ground.
9589-006-001-00 REV.1