Premier CGZL-1/230 User manual

Owner’s Manual
Axial Blow-Dryer Series
Read the owner’s manual throughly before use
Save the Owner’s Manual

- 1 -
Index
1.0 Specifications--------------------------------------------------------------------------Page 2
2.0 Important safety instructions-----------------------------------------Page 3
3.0 Operating instructions--------------------------------------------------------Page 4
4.0 Functions of Operating panel
4.1 Hour Meter----------------------------------------------------------------------------Page 4
4.2 Socket and Earth leakage protector-------------------------Page 4
4.3 Three-way Switch--------------------------------------------------------------Page 4
4.4 12A Overload Protector--------------------------------------------------Page 5
5.0 Parallel Operations----------------------------------------------------------------Page 5
6.0 Drying Range----------------------------------------------------------------------------Page 5
7.0 Maintenance------------------------------------------------------------------------------Page 6
8.0 Parts List-------------------------------------------------------------------------------------Page 6,7
9.0 Wiring Diagram-----------------------------------------------------------------------Page 7

2
1.0 Specifications
Models
Parameter CGZL-1/230 CGZL-1/120 CGZL-2/230 CGZL-2/120
Rated Voltage 230 V 120 V 230 V 120 V
Current,Frequency 1.25 A，50/60 Hz 2.5 A，50/60 Hz 1.25 A，50/60 Hz 2.5 A，50/60 Hz
Rated Power 1/4 HP 1/4 HP
Weight 16.4 kg 36 lb 15 kg 33 lb
Power cord Length 7.5 m 24.6 ft 7.5 m 24.6 ft
Air Output(Low
speed) 4600 m3/h 2700 CFM 4600 m3/h 2700 CFM
Air Output(High
speed) 5100 m3/h 3000 CFM 5100 m3/h 3000 CFM
Hour Meter / Draw
Bar Yes/Yes No/No
SIZE/Width*Height
*Deepth 640*620*290mm 25.2*24.4*11.4in 640*620*290mm 25.2*24.4*11.4in
Fig.1 Fig.2

3
2.0 Important Safety Instructions
WARNING
This equipment is not designed to use combustible/volatile substance such as gasoline
or kerosene, in, on, or near the machine. The use of such materials will cause an
extreme hazardous condition.
Do not operate the machine with a cut or frayed power cord. Replace cord if it becomes
damaged.
Do not unplug the machine by pulling on the cord. Grasp the plug firmly and pull it out of
the wall socket or power receptacle.
Always use a grounded outlet.
Never operate electrical equipment in standing water.
Never operate with the safety grills removed. Personal injury may result.
Do not stick your fingers or other objects through the safety grills.
Do not restrict airflow to the machine. This may cause the machine to overheat.
Machine should never be serviced or cleaned while it is plugged in.
Do not plug more than 9.0 amps total into the outlet.
Do not sit or stand on the machine or use as a shelf or table.
Check GFCI protection before each use by pushing “test” button. If operating properly,
“reset” button will pop out
Before leaving an Axial Blow-dryer unattended, ensure children do not have access to
the equipment. Do not allow children to play with or near the machine or in its air flow.
To reduce the risk of fire or electric shock, do not use this Blow-dryer with any solid-state
speed control device.
Operate the equipment in temperature - 18℃to 48℃
FAILURE TO COMPLY WITH THE ABOVE WARNING INSTRUCTIONS WILL VOID WARRANTY
GROUNDING INSTRUCTIONS
The model has been outfitted with the appropriate grounded connectors. Make sure the
machine is connected to grounded outlet having the same configuration as the grounded
plug. No adapter should be used with this machine. Any modification to the connectors will
void the warranty.

4
3.0 Operating Instructions
CGZL series are running 2 models, CGZL-1 and CGZL-2. CGZL-1 is equipped with draw bar
and wheels for easy transportation and an hour meter for calculating operating time. CGZL-2
is not equipped with the draw bar, wheels and hour meter. In transportation for CGZL-2
please use the handle on top of the blow-dryer.
Place the machine on the ground. Before use, please check whether the power cord and
plug are broken. If no breakage is found, connect the plug to the standard earthing socket.
The voltage and current of the socket is greater than the rated voltage and current of the
machine. Then, check the earth leakage protector on the safety plug socket to ensure it is
not tripped. Turn on the power switch and choose the drying mode through the Three-way
Switch on the operating panel (Fig. 3, 1.3).The operator must make sure the blow-dryer is
operating normally after starting up before leaving.
4.0 Functions of Operating Panel
4.1 Hour Meter（Fig. 3，1.1）
The function of the hour meter is to record operating time of the blow-dryer. It offers
convenience to evaluate the time and the charges of different new areas by calculating the
time to dry a similar area. Moreover it offers time record of all historical operating of the
blow-dryer.
4.2 Socket and Earth leakage protector（Fig. 3,1.2）
CGZL series blow-dryers are equipped with sockets, through which the blow-dryers can be
connected one to another. The socket is equipped with an earth leakage protector which
improves the security of the operator operating the blow-dryer under a damp environment.
The protector will break the power automatically in case of the electric leakage in the
machine is detected. It is strongly recommended to check the protector working normally
before operating the blow-dryer. To check the protector please follow the steps, First to press
the “Reset” button after the blow-dryer plug in, A small LED on the protector flashes as an
indication. Second to press the “Test” button. It indicates the protector works normally if the
“Test” button pops out. If it is found the blow-dryer does not work please check whether
“ Reset” button can pop out or not. If yes, please press down the “ Reset” button. If the
“Reset” button pops out again please contact authorized service center or your local dealer.
4.3 Three-way Switch（Fig. 3 ,1.3）
A three-way switch is used for CGZL series blow-dryer. The switch is with 2 gears of speed
regulating and respond to different air output demands. Sign “一” indicates low speed. Sign
“二” indicates high speed. And”O” in middle indicates disconnect state.

5
4.4 12A Overload Protector（Fig 3,1.4）
CGZL series blow-dryers are equipped with 12A overload protectors. It will automatically cut
off the circuit once current is over 12A due to circuit fault. Press “Reset” button when the
circuit fault is eliminated. Please contact authorized service center or your local dealer if the
“Reset” button pops out again.
Fig.3
5.0 Parallel Operations
As the rated current of the axial blow-dryer is 2.5A, the similar blow-dryers can be connected
through the power socket (Fig. 3, 1.2) on the operating panel. The overload protector with
current of 12A on the operating panel allows 4 axial blow-dryers to use in parallel at the
sametime(Figure4).
Fig.4
6.0 Drying Range
The current industry standard requires a blow drier guarantee the straight drying length of 5
meters; some industry standards of commercial constructions specify that a blow drier
should guarantee 5～6 square meters.
The time to dry off a standard size area is far less than other drying equipment by using
CGZL series blow-dryer. Especially for large-area building the CGZL series can dry off more

6
area in method of 5.0 Parallel Operation. Meantime it offers convenience to dry off the area
far from the fixed power supply.
7.0 Maintenance
Regularly check whether the insulation of power cord is broken or discolored. If yes,
replace it please.。
Check whether the fasteners get loose.
Keep it clean. Use compressed air or a dust collector to clean dirt on the machine. Do
not use a high-pressure cleaning machine.
Note any abnormal sound during use. Stop the machine for checking in case of any
abnormal noise.
Balance inspection and calibration have been done for blower fans. Please take care of
the fans during use. Never damage them.
Only professionals allowed to disassemble the blow-dryer. The removal of the motor and
fans may affect balance, resulting starting vibration and noise increase.
8.0 Parts List

7
SN Part Number Description
1 3CGA-0008 Motor / 1/4HP YDK139/200-4
2 3CGG-0006 Motor fixing bracket
3 3CGE-0012 Front Grille / Ф470
4 3CGE-0013 Rear Grille / Ф470
5 2SJ25B01-0003 Motor Grille
6 2SJ25E01-0001 Foot
7 3XCH-0015 Three-way Switch / B00188
8 3CGK-0001 Overload Protector 12A/ ZE800-12
9 3CGZ-0007 Socket
10 3CGZ-0006 Hour Meter JY732-03
11 2SJ25Q01-0001 Fan
12 2SJ25A01-0005 Fan Assy
13 3CGD-0002 Hub 1
14 3CGD-0003 Hub 2
15 3CGZ-0005 Draw Bar
9.0 Wiring Diagram

8
Suzhou Premier Electrical Appliance Co.,Ltd
9# Yangqing Road, Suzhou,215001, P.R.China
Service Line：86-512-67255986
Fax: [phone]
Website：www.premie.com.cn