Premio CT-DR101 User manual

USER’S
MANUAL
CT-DR101
3.5“ SBC Industrial Motherboard with
AMD Ryzen™ Embedded R1000/V1000 Series Processor

CT-DR101 l User’s Manual
Table of Contents
Prefaces …………………………………………………….……………………………………………. 04
Revision …………………………………………………………………………………………..……………….……….. 04
Disclaimer ………………………………………………………..…….…….………………………….……………….. 04
Copyright Notice …………………………………….…………………….…………………………………………… 04
Trademarks Acknowledgment …………..……………………………………………………….................. 04
Environmental Protection Announcement …………………………….………………….…………..….. 04
Safety Precautions ………………………………………….……………………………….…………….……….... 05
Technical Support and Assistance …………………………………….…………….…………….………….. 06
Conventions Used in this Manual ………………………………………………………………….….………. 06
Chapter 1 Product Introductions ………………………………………………………..… 07
1.1 Product Description ……….………………………………..………….………………..………. 08
1.2 Specifications ………………..………………………….....…………….…………..…..………… 09
1.3 Available Models …………………..……………………..…………………………………..…... 10
Chapter 2 Mechanical Specifications ….…………………..………………………..…. 11
2.1 Switch and Connector Locations ..…………………………………..…….…..……..….... 12
2.2 Connector / Switch Definition …..………………………….……….…….………............ 14
2.3 I/O Interface Descriptions .………..…............................................................. 15
2.3.1 Clear CMOS……....…………….…………………………………………....……………… 15
2.3.2 Panel Power setting …….……………………………………………....………………. 15
2.3.3 Backlight Power setting .……….……………………………………....……………… 16
2.3.4 Front Panel Header ..…………………………………....………………………………. 17
2.3.5 AT/ATX setting ……..…..……………………………………………....………………..… 18
2.3.6 Panel control ………..…………..……………………………………....…………………. 19
2.3.7 USB2 …………………………………………………………….……………....……………… 20
2.3.8 USB 3.2 ..…………………………………………………….……………………………..…. 21
2.3.9 Expansion I/O ………………………..………………………..……………………..….… 22
2.3.10 COM1 Port …………………...………………..………………………………………….. 23
2.3.11 COM2 Port ……….……………………………………………………………………….... 24
2.3.12 GPIO ……………….…….……………………………………....……………………..…… 25
2.3.13 SATA …………………………….…………………....………………………………….…… 26
2.3.14 SATA_PWR .……………………....……………………………………………………..… 27
2.3.15 USB2.0 Header .………………....………………………………………………………. 28
2.3.16 Power IN ……………………………………....………………………………………….… 29
2.3.17 FAN PWR …….…………………………………...………………………………………… 30
2.3.18 HDMI Display .………………………………………….………………………..……….. 31
2.3.19 Display Port ………………………………………………………………………………… 32
2.3.20 Dual RJ45 …………………………………………...………………………...……….…… 33
2.3.21 LVDS Header ……………………….…………….……………………………………….. 34
2.3.22 M.2 B key ………………………………………………..……………...…………………. 35
2.3.23 SIM Card …………………………………………………………………..……………….. 37
2.3.24 Battery ………………………………………………………………………….……..…….. 38
2.3.25 Buzzer …………………………………………………………….………...…………..…… 38
2.3.26 Memory …………………………………………………………….………...…………..… 39
2

CT-DR101 l User’s Manual
3
4.2 Main Setup ………….….…………………………………..……...…….……………..……..….... 45
4.3 Advanced Setup ………….….…………………………………..……...…………..……..….... 46
4.3.1 Trusted Computing …………….…………………………………………....…………… 47
4.3.2 ACPI Settings ………..…….………………..…………..…………………………..……… 48
4.3.3 IDE Configuration ...………………………………………………..…....……………… 49
4.3.4 Super IO Configuration ………………..……….……………....………………..…… 50
4.3.5 Hardware Monitor ……..……………………………………………....…………..…… 53
4.3.6 Serial Port Console Redirection ..……………………………....……………….… 55
4.3.7 CPU Configuration ……..…………….………………………....……………….……… 57
4.3.8 USB Configuration ………..…….………………..………………………………….….. 58
4.3.9 Network Stack Configuration ……..……….…………………....………………… 59
4.3.10 CSM Configuration ……………...………………………….………....……………… 60
4.3.11 AMD CBS …………….……..………………………..…………………....……………… 61
4.4 Chipset ………….………………………………........................................................... 62
4.4.1 SB USB Configuration ……………….....……………………………....……………… 62
4.4.2 North Bridge Configuration ...……………………………....………………......… 63
4.5 Security …….……………………..……………........................................................... 64
4.6 Boot ……………..………………………………........................................................... 67
4.7 Save and Exit …………………………………........................................................... 68
Appendix WDT & GPIO .…………………………..………………..……………..…..…. 69
WDT Sample Code ………………………..……….................................................... 70
GPIO Sample Code ………………………..……….................................................... 71
Chapter 4 System BIOS ….…………………………..………………..……………..…..…. 43
4.1 BIOS Introduction ………….….…………………………………..……...…….…..……..….... 44
Chapter 3 System Setup …………………..………………..……………..…………….…. 40
3.1 Heat Sink Installation .….…………………………………..……...…….……....……..….... 41

CT-DR101 l User’s Manual
4
Revision
Disclaimer
All specifications and information in this User’s Manual are believed to be accurate and up to date. Premio
Inc. does not guarantee that the contents herein are complete, true, accurate or non-misleading. The
information in this document is subject to change without notice and does not represent a commitment on
the part of Premio Inc.
Premio Inc. disclaims all warranties, express or implied, including, without limitation, those of
merchantability, fitness for a particular purpose with respect to contents of this User’s Manual. Users must
take full responsibility for the application of the product.
Copyright Notice
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or information storage and retrieval systems,
without the prior written permission of Premio Inc. Copyright © Premio Inc.
Trademarks Acknowledgment
Intel®, Celeron® and Pentium® are trademarks of Intel Corporation.
AMD Ryzen™are trademarks of AMD Corporation.
Windows® is registered trademark of Microsoft Corporation.
AMI is trademark of American Megatrend Inc.
IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation
All other products and trademarks mentioned in this manual are trademarks of their respective owners.
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. Please recycle to minimize pollution
and ensure environment protection.
Prefaces
Revision
Description
Date
1.0
Initial release
2022/07/14
Preface

CT-DR101 l User’s Manual
5
Safety Precautions
Before installing and using the equipment, please read the following precautions:
Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage.
The power outlet shall be installed near the equipment and shall be easily accessible.
Turn off the system power and disconnect the power cord from its source before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden surge
of power could ruin sensitive components. Make sure the equipment is properly grounded.
When the power is connected, never open the equipment. The equipment should be opened
only by qualified service personnel.
Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
Disconnect this equipment from the power before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.
Avoid the dusty, humidity and temperature extremes.
Do not place heavy objects on the equipment.
If the equipment is not used for long time, disconnect it from the power to avoid being
damaged by transient over-voltage.
The storage temperature shall be above -40°C and below 85°C.
The computer is provided with a battery-powered real-time clock circuit. There is a danger of
explosion if incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer.
If one of the following situation arises, get the equipment checked be service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the equipment.
•The equipment has been exposed to moisture.
•The equipment does not work well or it cannot work according the user’s manual.
•The equipment has been dropped and damaged.
•The equipment has obvious signs of breakage.
Preface