Prestigio PMB528K001 User manual

1. Safety information …........................................................................................... 1
2. Package Checklist ……….…………………………………………………………......………………….. 2
3. Product Configuration …….……….……………………………………………………………………… 2
4. External View ........................................................................................................ 3
5. Interface Instructions ......................................................................................... 4
6. Installation description ……………….………………………………………………………………….. 5
7. Troubleshooting ……………………………………………………………………………………………..…6
8. Protection of trademarks and intellectual property .............................. 8
9. Notes and information during operation ……………………….……………………….. 9

Safety Warning
•Before operating, please read this manual thoroughly, and keep it for future
reference.
•Delivery, handling & unpacking of the box should be careful, to exclude the PC
damaging.
•Image shown in this manual is indicative only. There may be differences
between the pictures and the actual product, please prevail in kind.
Security Tips
For using computer safely and effectively, please read the following carefully
before using:
•To avoid electric shock or product damage, each time you connect (not Plug-
and-play) devices, please turn off the AC power.
•Avoid using this product under temperature is too high or too low (Required
temperature is as following: Storage temperature: -20~70 Celsius; Operating
temperature: 0~40 Celsius; humidity: 10%~95%).
•Do not use a damp cloth to clean your computer and prevent liquid
dropping into the computer causing burns.
•In order to avoid frequently switching the machine to cause unnecessary
damage to the product, after shutting down, you should wait at least 30 seconds
for power-on again.
•To prevent product damage and malfunction, avoid strong shock and
vibration to the product.
EN - 1
EN
Risk of electric shock.
Do not open!
CAUTION: To reduce the risk of electric shock, do not attempt to uncover the product since there are no
user-serviceable parts inside it. For relevant services, please consult professional servicemen.
WARNING!
As the Prestigio products are constantly updated and improved, your
device’s software and hardware may have a slightly different appearance
or modified functionality than presented in this User manual.
Prestigio hereby states that this panel complies to basic requirements and
another relevant regulations given by the EU CE directives 2014/30/EU. Full
version of the declaration of conformity is available on:www.prestigio.com
User manual PC for Prestigio Multiboard Light

EN
EN - 2
Thank you for choosing our products. Before using your product, please make
sure your packaging is complete, if there have been damaged or you find any
shortage, please contact your agency as soon as possible.
•PC for Multiboard Light x 1
•WiFi antennas x 2
•Simple User's Guide x 1
•Screw x 2
Article PMB528K001
Processor Intel® Comet Lake-U i5 10210U 10th Gen
Memory 2 x SO-DIMM DDR4, 8GB RAM (max. support 32GB)
Storage KEY M 1 x M.2 2280 SATA SSD=256GB SSD
Graphics Intel® HD Graphics 6series
Network Intel Gigabit Ethernet
Audio Realtek ALC662 HD Audio IC
Dispaly Connectors 1 x HDMI 2.0
WIFI/BT 1 x M.2 2230 WIFI/BT Module
Interfaces (Frontside)
2 x USB3.1 Gen2 Type-A
1 x USB3.0 Type-A
1 x USB2.0 Type-A
1 x RJ45 10/100/1000M
1 x HDMI.4K2K resolution;
1 x USB3.1 Type-C
1 x 3.5mm Line out
1 x 3.5mm Mic in
2 x WIFI/BT ANT
1 x Power button
1 x Reset button
Power input 12-19V DC IN
Dimensions 119(L) x 180(W) x 30(H) mm
Operating systems Windows 10 (compatible)
User manual PC for Prestigio Multiboard Light

EN
Note: This illustration is for reference only, which may be deferent from the
material object.
The definition of all the jumpers and sockets which are marked in the above
picture, please refer to the following "Interface Instructions" part.
PWR BUTTON
MIC IN
LINE OUT
WIFI
LOCK
HDD LED
PWR LED
TYPE-C HDMI USB3.1 LAN USB3.0
RESET
WIFI
USB2.0
JAE
DC IN
User manual PC for Prestigio Multiboard Light
EN - 3

•MIC_IN: This jack is used to connect an external microphone
•LINE_OUT: This jack is used to connect to the front left and right channel
speakers of the audio system
•HDMI2.0:High-definition multimedia display interface, backwards
compatibility HDMI1.4
•USB2.0: USB 2.0 connectors, backwards compatibility USB 1.1
•USB3.0: USB 3.0 connector, backwards compatibility USB 2.0/1.1
•LAN: RJ-45 Ethernet network connector
•PWR BUTTON: Pressing the power button, the machine will turn on
•PWR_LED: Power indicator light
•HDD_LED: HDD indicator light
•RESET: Reset button
•WIFI: WiFi antenna interface
•USB3.1 Type-C: Type-C connector
•USB3.1 Gen2 Type-A: USB 3.1 connector, backwards compatibility USB 3.0/2.0
•LOCK: LOCK button
•JAE: 80 PIN Extension Port
•DCIN: DC Power interface
User manual PC for Prestigio Multiboard Light
EN - 4
EN

Step 1.
Put the PC into PСslot on the back of the Multiboard Light (PMB000L654 /
PMB000L754). The correct direction of insertion is indicated on the PC body
with an arrow.
Step 2.
Slide the PC module all the way into the slot.
Step 2Step 1
Step 3.
Fix the PC module on the Multiboard Light with two screws (supplied) as it is
shown on the picture.
Step 3
User manual PC for Prestigio Multiboard Light
EN - 5
EN

Special Tips:
Please check the following table to see if it can help to find out the reason for
the malfunction encountered before performing maintenance. When it still
cannot remove the fault according to the operation of this instruction book
completely, please contact the service center (SC) to conduct product
maintenance.
№
Symptom Possible Cause Solution
1
The PC module
emits a series of
intermittent and /
or long signals
without loading the
operating system.
The PC module is not
securely connected to the
interactive panel.
Check the secure connection
and tightening of the screws of
the PC module to the
interactive panel. If necessary,
reconnect the PC module (refer
to instructions on page 5).
Malfunction of one of the
nodes of the PC module.
Contact the SC to diagnose and
repair the faulty unit.
2
The operating
system does not
boot.
SSD is defective Contact the SC for diagnostics
and repair of a faulty node.
The operating system is
damaged or not installed.
Reinstall the OS or contact the
SC for diagnostics to restore the
operating system.
The PC module is not
securely connected to the
interactive panel or
defective.
Check point 1.
3Poor or unstable
Wi-Fi signal.
There is interference or the
wi-fi antennas are poorly
installed.
Check antenna connections and
positioning.
Defective wi-fi module or
damaged antennas.
Contact the SC for diagnostics
of replacement / repair of a
faulty node.
4
No LED indication.
PC module does not
turn on.
No mains power.
Connect the interactive panel to
AC power and press the power
button. If the symptoms of the
malfunction are not eliminated,
contact the SC.
User manual PC for Prestigio Multiboard Light
EN
EN -6

5
The peripheral
equipment connected
to the PC ports of the
module does not work.
Defective peripheral
equipment.
Check the operation of the
peripheral equipment, check if the
connection is correct by referring
to the user manual of the third
-
party equipment, if necessary,
contact the supplier of this
equipment for assistance.
Malfunction of the
motherboard or damage
to the ports of the PC of
the module.
Contact the SC for diagnostics and
the repair of a faulty node.
6
Loud noise and heating
of the PC module
Dust contamination of
the cooling system and
its inefficiency.
Contact the SC for diagnostics
and cleaning of the cooling
system.
Malfunction of elements
of the cooling system.
Contact the SC for diagnostics
and repair of a faulty node.
User manual PC for Prestigio Multiboard Light
EN - 7
EN

This document, the contents of the device, and also any data uploaded including
types, graphic images, sound files, video, text, design elements, software and
documentation (user guides, illustrations, etc) constitute intellectual property
and may not be copied, altered or distributed in whole or in part without the
owner's permission.
The Prestigio trademark and logo are the property of Prestigio Plaza Limited.
"Prestigio" is a registered trademark belonging to the Prestigio company.
Applicable law: this document is drawn up in accordance with the law of Cyprus.
Any questions concerning this document should be addressed to the company at:
«Prestigio Plaza Limited» Spyrou Kyprianou 26, Prestigio Plaza, 4040, Limassol,
Cyprus.
This information may change from time to time. For more information see
www.prestigio.com
EN:
Manufacturer: «Prestigio Plaza Limited» Spyrou Kyprianou 26, Prestigio Plaza,
4040, Limassol, Cyprus.
Made in China
Importer to the Russian Federation: LLC Asbis 125445 Moscow, municipal district
Levoberezhny internal city, Leningradskoe sh., 71G, building 2, floor 3, room. 20,
tel. [phone]
Date of manufacture is shown on a sticker under the serial number on the
individual package.
User manual PC for Prestigio Multiboard Light
EN
EN - 8

Quick Start Guide Prestigio Digital Signage
EN
EN - 9