Prestigio P260DVD-X User manual

Prestigio P260DVD-X P420DVD-X 1
ENG
Prestigio P260DVD-X P420DVD-X
User’s Manual

2 Prestigio P260DVD-X P420DVD-X
ENG
Safety Instructions
Before using this product, please read the security instructions first and bear them in mind when using the product.
Warning
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN. NO USER-SERVICEABLE PARTS INSIDE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS
VOLTAGE. WITHIN THE PRODUCTS ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A
RISK OF ELECTRIC SHOCK TO PERSONS.
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND
MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other
European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product, please contact your local city office,
your household waste disposal service or the shop where you purchased the product.
Important Safety Instructions
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment,
care must be taken if you are to obtain the best results and safety is to be assured. So, please read the points below for your own
safety. They are of a general nature, intended to help you with all your electronic consumer products and some points may not
apply to the goods you have just purchased.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
• This TV is not completely disconnected from a power supply line, as minute current is consumed even when the POWER
switch is turned off (Depend on the model).
• Do not place hot objects or naked flame sources, such as lighted candles or highlights on, or close to the TV. High
temperatures can melt plastic and lead to fires.
• Do not set on top of the TV any object or container that might spill liquids or small objects into the TV.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where
it exits the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Prestigio P260DVD-X P420DVD-X 3
ENG
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
• The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed
on the apparatus.
• Please keep the minimum distance 100mm from the back side of this product to the back wall.
• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily
operable.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A grounding type plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The side blade or the third prong
are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
• This product complies with DHHS RULES 21 CFR Chapter 1, Subchapter J applicable at the date of Manufacture.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
CAUTION: These servicing instruction are for use by qualified service personnel only. To reduce the electric
shock do not perform any servicing other than that contained in the operating instructions unless you are
qualified to do so.
WARNING: This apparatus should be connected to a MAINS socket outlet with a protective earthing
connection.

4 Prestigio P260DVD-X P420DVD-X
ENG
Overview
Front View
LM
LQ

Prestigio P260DVD-X P420DVD-X 5
ENG
LT
LU
1. MASTER SWITCH (Depend on the model)
2. Remote Control Sensor
3. POWER: Turns the TV on and off.
4. LED Lights
5. VOLUME: Increases or decreases the volume. This is also used to select the “MOVE&ADJUST” item on the on-screen menu.
6. PROGRAM: Changes channels or “MOVE&ADJUST” to items on the on-screen menu.
7. MENU: To access or close menus, simultaneously.
8. TV/VIDEO: Selects an external device connected to the TV.
<DVD> - Depend on the model
9. PLAY/PAUSE: Play the DVD or temporarily stop playback.
10. STOP: Stop the DVD playback.
11. OPEN/CLOSE: OPEN/CLOSE the DVD.

6 Prestigio P260DVD-X P420DVD-X
ENG
Rear Panel Jacks
1. PC INPUT (VIDEO/AUDIO) JACKS
2. RS-232C INPUT JACK (UPGRADE)
3. HDMI INPUT, DVI INPUT(VIDEO/AUDIO:L/R) JACK
4. COMPONENT JACKS (VIDEO : Y, Pb, Pr/AUDIO : L/R)
5. LINE (VIDEO/AUDIO) OUTPUT JACKS
6. VIDEO3 (VIDEO/AUDIO) INPUT JACKS
7. S-VIDEO INPUT JACK
8. DIGITAL AUDIO OUTPUT JACK
9. SCART JACKS (BOTTOM : SCART1, TOP : SCART2)
10. HEADPHONE JACK : Used for headphones that can be purchased additionally.
11. TV ANTENNA INPUT JACK

Prestigio P260DVD-X P420DVD-X 7
ENG
Remote Control
1. POWER: Turns the TV on and off.
2. LINE: External input selection. (TV > RGB >Video1 >Video2 > Video3 >
S-Video >DVD >COMPONENT >PC >HDMI )
3. TV/DVB-T: Switches to TV/DVB-T mode.
4. SWAP: Exchanges the video signal source of the main screen and the PIP
window.
5. ON/OFF: Turns PIP on or off.
6. NUMBER BUTTONS: Selects channels directly on the TV.
7. -/--: Selects channels over 10. For example, to select channel 21, press “-/--”
then press “2”, “1”.
8. STILL: Freezes a moving picture on the screen.
9. M/S: Sound mode selection.
10. P.STD: Configures various video settings.
11. ARROW/ENTER: Select an item of menu/Change confirmation.
12. P.SIZE: Changes the screen size.
13. DISPLAY: Displays the current channel and the audiovideo settings.
14. MUTE: Temporarily mute the sound.
15. TTX: Switches to Teletext mode.
16. SOURCE: Selects the signal source for the PIP window.
17. SOUND: Changes the audio signal source between the main screen and the
PIP window.
18. VOL: Increases or decreases the volume.
19. PRE: Moves to the previous channel.
20. PROG: Changes channels.
21. SLEEP: Selects a preset time interval for automatic shutoff.
22. TV.MENU: Displays the OSD menu.
23. S.STD: Configures various audio settings.
24. EXIT: Exit the current configuration.
<DVD> - Depend on the model
25. SLOW: For fast and slow playback.
26. TITLE: For selecting a title on the disc.
27. SETUP: For initial DVD player settings.
28. REC: DVD R/W (option)
29. OPEN/CLOSE: OPEN/CLOSE the DVD tray.
30. STOP: Stop the DVD playback.
31. PLAY/PAUSE: Play the DVD or temporarily stop playback.
32. STEP: For playing one frame at a time.
33. MENU: For displaying the menu contained in the disc.
<DVD & TTX> - Depend on the model
34. INPUT: DVD R/W (option)
35. TIME/REPEAT: To display time / For specifying and repeating playback of a
segment.
36. INDEX/A-B: Program selection by name/For repeated playback of disc titles,
chapters or sound.
37. HOLD/PROGRAM: Teletext page/For playback in a specified order.
38. PRE PAGE/ANGLE: Teletext previous page/For viewing scenes from different.
39. MIX/AUDIO: Video & TTX MIX/ For selecting the audio language.
40. REVEAL/GOTO: Teletext reveal/For jumping to a specified location.
41. SIZE/SUBTITLE: Teletext size selection/For selecting the SUBTITLE language.
42. CANCEL/CANCEL: To exit from the teletext display/To erase a program
content.
43. SUB PAGE/ZOOM: Teletext SUB-PAGE/For magnifying the screen.
44. NEXT PAGE/BOOK MARK: Teletext NEXTPAGE/ To SAVE a specific frame for
later viewing

8 Prestigio P260DVD-X P420DVD-X
ENG
Connecting Your TV
Connecting an Antenna or Cable without a Decoder box
Connecting the Scart Jack
Connection Procedures
1. SCART1 is used for the equipment with an RGB output, such as video game devices or video disc players. This end can be fitted
with:
- A SCART connector
- Three RCA connectors (VIDEO+AUDIO_L+AUDIO_R)
Procedures for watching a Video over a VCR
1. Turn the TV on, and select ‘VIDEO1’ using the LINE button on the remote control.
2. If you have a second VCR and wish to copy cassette tape, connect the source VCR to SCART1 and the target VCR to SCART2 so that
you can redirect the signal from SCART1 to SCART2.

Prestigio P260DVD-X P420DVD-X 9
ENG
Connecting a Digital Audio System
Connection Procedures
1. Connect the DIGITAL OUT jack on the back of your TV to the DIGITAL IN jack of the Decoder or AV amplifier.
2. Turn the digital amp on and select the external input mode.
Connecting the Video or S-Video/Audio Jacks
Connection Procedures
1. Connect the antenna cable to the ANTENNA IN terminal on the back of your VCR.
2. Connect the VIDEO/AUDIO INPUT jacks of the TV and the video/audio output jacks of your VCR with the video/audio cables.
(Connect the cable to the terminal of the same color)
- You can use the S-Video cable to connect a VCR or a DVD player for better video quality.
- If your VCR does not support stereo sound, connect the mono audio out jack to the AUDIO INPUT (left) jack.
Procedures for watching a video over a VCR
Turn the TV on, and select ‘VIDEO 3’ using the LINE button on the remote control.
- If you have connected a S-Video cable, select ‘S-VIDEO’.

10 Prestigio P260DVD-X P420DVD-X
ENG
Connecting a External TV
Connection Procedures
1. Connect the AUDIO CABLES between the AUDIO OUT L and R jacks on the back of your TV and the corresponding AUDIO INPUT
jacks on external TV.
2. Connect the VIDEO CABLE between the VIDEO OUT jack on the back of your TV and the corresponding VIDEO INPUT jack on
external TV.
To watch the external TV
1. Turn the external TV on and select ‘VIDEO’ using the external input button.
2. Turn your TV on.
Connecting the DTV Receiver
Connection Procedures
1. The COMPONENT VIDEO IN and COMPONENT AUDIO IN connectors are used for equipment with a DVD or DTV receiver out.
(480i/60Hz, 480p/60Hz, 576i/50Hz, 576p/50Hz, 720p/50Hz, 720p/60Hz, 1080i/50Hz,1080i/60Hz)
To watch the DTV
1. Turn the TV on, and select ‘COMPONENT’ using the LINE button on the remote control.
2. Turn the DTV Receiver on.

Prestigio P260DVD-X P420DVD-X 11
ENG
Connecting the HDMI JACK
Warning: Do not Connect DVI audio cable.
Connection Procedures
1. Connect the HDMI input jack of the TV and the HDMI output jack of your DTV Receiver (480p/60Hz, 576p/50Hz, 720p/50Hz,
720p/60Hz, 1080i/50Hz, 1080i/60Hz).
Connecting the HDMI JACK (USE DVI JACK)
Connection Procedures
1. Connect the HDMI input jack of the TV and the DVI output jack of your DTV Receiver (Using the adapter or HDMI cable).
2. Connect the DVI audio input jacks of the TV and the DVI audio output jacks of your DTV Receiver with the audio cable (480p/60Hz,
576p/50Hz, 720p/50Hz, 720p/60Hz, 1080i/50Hz,1080i/60Hz).
3. VESA Standard Mode (Resolution/Vertical Frequency) • 800x600/60Hz, 800x600/72Hz, 800x600/75Hz, 1024x768/60Hz,
1024x768/70.1Hz,1280x768/60Hz.

12 Prestigio P260DVD-X P420DVD-X
ENG
TV Function
Check Before Using
Please check the following check list before using the TV.
1. Is the antenna cable connected properly?
2. Are the remote control batteries installed properly?
- Install two AAA size batteries according to the correct polarity.
- The remote control works up to about 7~10m from the TV, 3m to the left or right of the TV, and to within
30 degrees from the remote control sensor of the TV.
3. Have the receive channels been configured?
4. Are the cables connected to any external devices connected properly?
Watching TV
Turning the TV On and OFF
Note
When you power on this product in the first time, the product will ask you language and country selection
on the screen menu. Thus, you should select your own language and country by /\ / \/ and ENTER button.
1. Plug the mains lead into an appropriate socket.
2. Press the POWER switch on the bottom of the television toward “ON”(I) (Depend on the model).
3. Press the POWER button on the remote control (or on the front panel of the unit.)
You can also switch on by pressing the PROG /\ / \/ buttons.
• When you turn the power ON, the screen appears and the POWER/STANDBY light is turned off.
• When you turn the power OFF, the screen goes blank, and the POWER/STANDBY light turns red.
• Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for example). Turn
your television off by pressing the POWER switch toward “OFF”(O)(Depend on the model). It is best to unplug the set from the
mains and aerial.
Selecting the Menu Language
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select FUNCTION using the < / > button.
3. LANGUAGE using the /\ / \/ button and then press the > button.
4. Select the desired menu language using the /\ / \/ button.
5. Press the EXIT button to exit the menu.
Viewing the Status Information
Press the DISPLAY button on the remote control. The TV will display the input source, the picture mode, the sound mode, the
STEREO mode, the sleep time, the current time, and the pip mode.

Prestigio P260DVD-X P420DVD-X 13
ENG
Adjusting the Volume
Adjust the volume using the VOL /\ / \/ button.
Muting the Sound
Press the MUTE button. You can conveniently use the MUTE button when a telephone or a door bell rings. To cancel, press the MUTE
button again.
Viewing a Video, DVD or COMPONENT
Press the LINE button. For connection and setup procedures, refer to the corresponding chapter of this manual.
Storing Channels Automatically
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select SETUP using the < / >button.
3. Select AUTO PROGRAMMING using the /\ / \/ button and then press the > button.
4. Select your COUNTRY using the < / > button and then press the \/ button.
Manual Storing of Channels
When storing channels manually, you can choose:
- Whether or not to store each of the channels found.
- The programme number by which you wish to identify each stored channel.
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select SETUP using the < / > button.
3. Select MANUAL PROGRAM using the /\ / \/ button and then press the > button.
4. Select SYSTEM using the < / > button. AUTO > BG >I >DK > M > L > LP > AUTO
5. Select PROGRAM NO. using the /\ / \/ button and press the < / > button to select the required channel number.
6. Select SEARCH using the /\ / \/ button and then press the > button.
The tune scans the frequency range until the first channel on the channel that you selected is received on your screen.
7. Select STORE using the /\ / \/button and then press the > button.
8. Repeat Step 5 to 7 for each channel to be stored.

14 Prestigio P260DVD-X P420DVD-X
ENG
Channel Name
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select SETUP using the < / > button.
3. Select Program Edit using the /\ / \/ button and then press the > button.
4. Select NAME using the < / > button and press the /\ / \/ or < / > buttons to edit the name.
/\ / \/: Select the characters (A~ Z, 0~9, -, +).
< / >: move on the previous or next letter.
5. Press the EXIT button to exit the menu.
Activating the Child Lock
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmers by muting out
video and audio. Child Lock cannot be released using front panel buttons. Only remote control can release the Child Lock setting, so
keep the remote control away from children.
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select SETUP using the < / > button.
3. Select MANUAL PROGRAM using the /\ / \/ button and then press the > button.
4. Select CHILD LOCK using the /\ / \/ button.
5. To lock the channel, select LOCK by pressing the < / > button.
Activating the Child Unlock
Note
When child lock is activated, only entering the correct password will proceed to the operation before you
can do auto or manual searches. Everything previously locked will be unlocked.
1 - 4. STEP1~STEP4 is the same as that of Activating the Child Lock.
5. When a login dialog box appears, enter the password to deactivate the CHILD LOCK.

Prestigio P260DVD-X P420DVD-X 15
ENG
Program Edit
This function enables you to delete, copy, move or skip the stored programs.
1. Select the channel to tune using the numeric or channel buttons.
2. Press the TV.MENU button. The OSD MENU will be displayed.
3. Select SETUP using the < / > button.
4. Select PROGRAM EDIT using the /\ / \/ button and then press the > button.
Delete a Program
1. Select a program to the deleted with the /\ / \/ buttons.
2. Press the RED button. The selected program is deleted.
All the following programs are shifted up one position.
Copy a Program
1. Select a program to the copied with the/\ / \/ buttons.
2. Press the YELLOW button.
Move the program to the desired program number with the /\ / \/ buttons.
All the following programs are shifted down one position.
3. Press the YELLOW button again to release this function.
Moving a Program
1. Select a program to the moved with the /\ / \/buttons.
2. Press the GREEN button.
3. Move the program to the desired program number with the /\ / \/ buttons.
4. Press the GREEN button again to release this function.
Skipping a Program Number
1. Select a program to the skipped with the /\ / \/ buttons.
2. Press the BLUE button. The skipped program turns to ‘YES’.
3. Press the BLUE button again to release this function.
When a program number is skipped it means that you will be unable to select it using the /\ / \/ button during normal TV viewing. If
you want to select the skipped program, directly enter program number with the number buttons or select it in the program edit or
table menu.

16 Prestigio P260DVD-X P420DVD-X
ENG
Changing Channel
1. Using the CHANNEL buttons. Press the PROG /\ / \/buttons to change channels. You will see all the channels that the TV has
memorized. (The TV must have memorized at least three channels.)
2. Using the NUMBER buttons
- To change to single-digit channels (0~9) faster, press “0” before the single digit. Example: For channel 4, press “0”, then “4”.
- To select a channel over 10, press the -/-- button first. Example: For channel 42, press “-/--”, then “4”, then “2”.
3. Using the Previous Channel. Press the PRE button on the remote control. The TV changed to the last channels to the last channel
you were watching.
When the Picture Quality is Poor or Unstable
Use fine tuning to adjust a particular channel for better picture quality when noise interferes, color quality is poor, or the screen is
unstable.
1. Select the channel to tune using the numeric or channel buttons.
2. Press the TV.MENU button. The OSD MENU will be displayed.
3. Select SETUP using the /\ / \/ button.
4. Select MANUAL PROGRAM using the /\ / \/ button and then press the > button.
5. Select FINE TUNE using the /\ / \/ button and then press the </>button to fine tune.
If you are unable to fine-tune a channel, check that the SYSTEM settings are correct.
6. Select STORE using the /\ / \/ button and then press the > button.
7. Press the EXIT button to exit the menu.
Selecting the Picture Status
You can select a video mode from among USER, STANDARD, DYNAMIC, or MILD mode according to your personal preference.
QUICK! Press the P.STD button. Whenever you press this button, PICTURE STATUS changes to
STANDARD >DYNAMIC >MILD >USER mode, in this order.
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select PICTURE using the </> button.
3. Select the desired PICTURE STATUS using the </> button. Whenever you press this button, PICTURE STATUS changes to
STANDARD >DYNAMIC >MILD >USER mode, in this order.
4. Press the EXIT button to exit the menu.

Prestigio P260DVD-X P420DVD-X 17
ENG
Picture Status
• STANDARD: Select this mode when the surrounding illumination is bright.
• DYNAMIC: Select this mode to increase picture clarity and sharpness.
• MILD: Select this mode when viewing the TV when the light is low.
• USER: Select this mode if you want to adjust the settings according to your personal preferences.
Adjusting the Picture Settings
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select PICTURE using the </> button.
3. Select the desired item to adjust using the /\ / \/ button.
4. Select the desired status using the </> button. In addition, PICTURE STATUS is automatically changed to USER mode.
5. Press the EXIT button to exit the menu.
Picture
• CONTRAST: Determines the difference in brightness between an object and the background.
• BRIGHTNESS: Determines the brightness of the screen.
• SHARPNESS: Determines the sharpness of an object image.
• COLOR: Determines the color density.
Selecting the Sound Mode
You can select a sound mode from among STANDARD, MUSIC, SPEECH or USER mode according to your personal preference.
QUICK! Press the S.STD button. Whenever you press this button, SOUND STATUS changes to STANDARD >
MUSIC > SPEECH > USER mode, in this order.
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select SOUND using the </> button.
3. Select the desired STATUS using the </> button. Whenever you press this button, SOUND STATUS changes to STANDARD >
MUSIC > SPEECH > USER mode, in this order.
4. Press the EXIT button to exit the menu.
Sound Status
• STANDARD: Select this to listen to sound normally.
• MUSIC: Select this to listen to the original sound.
• SPEECH: Select this to listen to clear voice sound.
• USER: Select this if you want to adjust the settings according to your personal preferences.

18 Prestigio P260DVD-X P420DVD-X
ENG
Adjusting the Balance
Determines the volume ratio between the left and right speakers.
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select SOUND using the </> button and then press the \/ button.
3. Select BALANCE using the /\ / \/ button.
4. Select the desired status using the </> button. Also, the Sound Status is automatically changed to USER mode.
5. Press the EXIT button to exit the menu.
Adjusting the Headphone Volume
You can listen to the sound of the main or sub PIP using the headphones. You can also adjust the volume of the headphones.
Note: Prolonged use of headphones at a high volume may damage your hearing.
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select SOUND using the </> button.
3. Select HEADPHONE VOLUME using the /\ / \/ button.
4. Select the desired volume level using the </> button.
Adjusting the Equalizer
Determines the volume of the frequency range (low to high tones).
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select SOUND using the </> button.

Prestigio P260DVD-X P420DVD-X 19
ENG
3. Move to the EQUALIZER item using the /\ / \/ button and then press the > button. During the adjustment an additional
adjustment window will be displayed.
4. Move to the desired frequency using the > button.
5. Select the desired status using the /\ / \/button. When you have adjusted the EQUALIZER, the SOUND STATUS is automatically
changed to USER MODE.
Choosing a Soundtrack
The M/S button displays/controls the processing and output of the audio signal. When power is switched ON, the mode is
automatically preset to either DUAL or STEREO, depending on the current transmission.
Quick! Pressing the M/S button. Whenever you press this button, the mode changes to STEREO/MONO
mode, in this order.
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select SOUND using the </> button.
3. Select STEREO or DUAL using the /\ / \/ button.
4. Select the desired status using the </> button.
5. Press the EXIT button to exit the menu.
- If the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position using the M/S button.
- If the stereo signal is weak (or if intermittent Stereo-Mono) and automatic switching occurs, then switch to the MONO mode.
- When receiving mono sound in the AV mode, connect to the ‘L’ input jack on the panels.
- If the mono sound comes out only from the left speaker, then press the M/S button.
Type of broadcast On-Screen
NICAM STEREO Standard broadcast MONO
Regular+NICAM MONO MONO
NICAM STEREO NICAM STEREO<-> MONO
NICAM DUAL NICAM MAIN -> NICAM SUB
A2 STEREO Standard broadcast MONO
Bilingual or DUAL MAIN <-> SUB
STEREO STEREO <-> MONO

20 Prestigio P260DVD-X P420DVD-X
ENG
Changing the Screen Size
You can select a desired screen size for each video.
Press the P.SIZE button.
Whenever you press the P.SIZE button, the screen size changes to WIDE >14:9 >4:3 >ZOOM1 > ZOOM2, in this order.
Screen Size Menu
• AUTO : Auto Screen size Control (only TV mode).
• WIDE : Set the picture to 16:9 wide mode (default).
• 14:9 : Sets the picture to 14:9 mode (only TV mode).
• 4:3 : Sets the picture to 4:3 normal mode. This is a standard TV screen size.
• ZOOM1: Magnifies the size of the picture on the screen.
• ZOOM2: Magnifies the size of the picture on the screen leaving the subtitles visible.
Note
You can select only WIDE, 4:3 screen size in the PC Mode.
Freezing the Picture
You can freeze a moving picture on the screen.
Quick! Press the STILL button. Whenever you press this button, the freezing function is turned on or off.
Note
• Even if the picture has been frozen, the audio sound continues normally.
• The freezing function will not work for the PIP window in PIP mode.
Viewing Picture-in-Picture
You can watch two videos on the screen simultaneously.
Quick! Pressing the ON/OFF button. Pressing the button turns the PIP screen on or off.