Prestigio P170DVD-X User manual

Prestigio P170DVD-X P200DVD-X 1
ENG
Prestigio P170DVD-X P200DVD-X
User’s Manual

2 Prestigio P170DVD-X P200DVD-X
ENG
Safety Instructions
Before using this product, please read the security instructions first and bear them in mind when using the product.
Warning
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN. NO USER-SERVICEABLE PARTS INSIDE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS
VOLTAGE. WITHIN THE PRODUCTS ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A
RISK OF ELECTRIC SHOCK TO PERSONS.
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND
MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other
European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product, please contact your local city office,
your household waste disposal service or the shop where you purchased the product.
Important Safety Instructions
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment,
care must be taken if you are to obtain the best results and safety is to be assured. So, please read the points below for your own
safety. They are of a general nature, intended to help you with all your electronic consumer products and some points may not
apply to the goods you have just purchased.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
• This TV is not completely disconnected from a power supply line, as minute current is consumed even when the POWER
switch is turned off (Depend on the model).
• Do not place hot objects or naked flame sources, such as lighted candles or highlights on, or close to the TV. High
temperatures can melt plastic and lead to fires.
• Do not set on top of the TV any object or container that might spill liquids or small objects into the TV.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where
it exits the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Prestigio P170DVD-X P200DVD-X 3
ENG
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
• The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed
on the apparatus.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.

4 Prestigio P170DVD-X P200DVD-X
ENG
Overview
Front View
LM
LQ

Prestigio P170DVD-X P200DVD-X 5
ENG
LT
LU
1. Remote Control Sensor
2. POWER: Turns the TV on and off.
3. LED Lights
4. VOLUME: Increases or decreases the volume. This is also used to select the “MOVE/ADJUST/PREV” item on the on-screen menu.
5. PROGRAM: Changes channels or “MOVE/ADJUST/PREV” to items on the on-screen menu.
6. MENU: To access or close menus, simultaneously.
7. TV/VIDEO: Selects an external device connected to the TV.
<DVD> - Depend on the model
8. PLAY/PAUSE: Play the DVD or temporarily stop playback.
9. STOP: Stop the DVD playback.
10. OPEN/CLOSE: OPEN/CLOSE the DVD.

6 Prestigio P170DVD-X P200DVD-X
ENG
Rear Panel Jacks
1. POWER INPUT CONNECTOR
2. PC VIDEO(D-SUB) INPUT JACK
3. TV ANTENNA INPUT JACK
4. PC AUDIO INPUT JACK
5. SCART JACK
6. HEADPHONE JACK: Used for headphones that can be purchased additionally.
7. LINE (VIDEO/AUDIO) INPUT JACKS
8. S-VIDEO INPUT JACK

Prestigio P170DVD-X P200DVD-X 7
ENG
Remote Control
1. POWER: Turns the TV on and off.
2. LINE: External input selection. (DVD > RGB > Video1 > Video2 > S-Video >
PC )
3. TV: Switches to TV mode.
4. SWAP(option): Exchanges the video signal source of the main screen and
the PIP window.
5. ON/OFF(option): Turns PIP on or off.
6. NUMBER BUTTONS: Selects channels directly on the TV.
7. -/--: Selects channels over 10. For example, to select channel 21, press “-/--”
then press “2”, “1”.
8. STILL(option): Freezes a moving picture on the screen.
9. M/S: Sound mode selection.
10. P.STD: Configures various video settings.
11. ARROW/ENTER: Select an item of menu/ Change confirmation/ VOL. +,- /
PROG up,down control.
12. P.SIZE: Changes the screen size.
13. DISPLAY: Displays the current channel and the audiovideo settings.
14. MUTE: Temporarily mute the sound.
15. TTX: Switches to Teletext mode.
16. SOURCE(option): Selects the signal source for the PIP window.
17. SOUND(option): Changes the audio signal source between the main screen
and the PIP window.
18. VOL: Increases or decreases the volume.
19. PRE: Moves to the previous channel.
20. PROG: Changes channels.
21. SLEEP: Selects a preset time interval for automatic shutoff.
22. TV.MENU: Displays the OSD menu.
23. S.STD: Configures various audio settings.
24. EXIT: Exit the current configuration.
<DVD> - Depend on the model
25. SLOW: For fast and slow playback.
26. TITLE: For selecting a title on the disc.
27. SETUP: For initial DVD player settings.
28. REC: DVD R/W (option)
29. OPEN/CLOSE: OPEN/CLOSE the DVD tray.
30. STOP: Stop the DVD playback.
31. PLAY/PAUSE: Play the DVD or temporarily stop playback.
32. STEP: For playing one frame at a time.
33. MENU: For displaying the menu contained in the disc.
<DVD & TTX> - Depend on the model
34. INPUT: DVD R/W (option)
35. TIME/REPEAT: To display time / For specifying and repeating playback of a
segment.
36. INDEX/A-B: Programme selection by name/For repeated playback of disc
titles, chapters or sound.
37. HOLD/PROGRAM: Teletext page/For playback in a specified order.
38. RE PAGE/ANGLE: Teletext previous page/For viewing scenes from different.
39. MIX/AUDIO: Video & TTX MIX/ For selecting the audio language.
40. REVEAL/GOTO: Teletext reveal/For jumping to a specified location.
41. SIZE/SUBTITLE: Teletext size selection/For selecting the SUBTITLE language.
42. CANCEL/CANCEL: To exit from the teletext display/ To erase a program
content.
43. SUB PAGE/ZOOM: Teletext SUB-PAGE/For magnifying the screen.
44. NEXT PAGE/BOOK MARK: Teletext NEXTPAGE/ To SAVE a specific frame for
later viewing

8 Prestigio P170DVD-X P200DVD-X
ENG
Connecting Your TV
Connecting an Antenna or Cable without a Decoder box
Connecting the Video or S-Video/Audio Jacks
Connection Procedures
1. Connect the antenna cable to the ANTENNA IN terminal on the back of your VCR.
2. Connect the VIDEO/AUDIO INPUT jacks of the TV and the video/audio output jacks of your VCR with the video/audio cables.
(Connect the cable to the terminal of the same color)
- You can use the S-Video cable to connect a VCR or a DVD player for better video quality.
- If your VCR does not support stereo sound, connect the mono audio out jack to the AUDIO INPUT (left) jack.
Procedures for watching a video over a VCR
Turn the TV on, and select ‘VIDEO 2’ using the LINE button on the remote control.
- If you have connected a S-Video cable, select ‘S-Video’.

Prestigio P170DVD-X P200DVD-X 9
ENG
Connecting the Scart Jack
Connection Procedures
1. AV1 is used for the equipment with an RGB output, such as video game devices or video disc players. This end can be fitted with:
- A SCART connector
- Three RCA connectors(VIDEO+AUDIO_L+AUDIO_R)
Procedures for watching a Video over a VCR
1. Turn the TV on, and select ‘VIDEO1’ using the LINE button on the remote control.
NOTE: When the RGB cloors look abnormal on screen, check the SCART cable if it’s properly connected.

10 Prestigio P170DVD-X P200DVD-X
ENG
TV Function
Check Before Using
Please check the following check list before using the TV.
1. Is the antenna cable connected properly?
2. Is the AC adapter connected properly?
- When you connect the adapter to the unit, turn the power switch on the front panel to “off”, and then
connect the adapter cable.
- When not using the adapter for a long time period, separate the AC adapter from both the main body and
the power outlet on the wall.
3. Are the remote control batteries installed properly?
- Install two AAA size batteries according to the correct polarity.
- The remote control works up to about 7~10m from the TV, 3m to the left or right of the TV, and to within
30 degrees from the remote control sensor of the TV.
4. Have the receive channels been configured?
5. Are the cables connected to any external devices connected properly?
Watching TV
Turning the TV On and OFF
Press the POWER button on the remote control (or on the front panel of the unit.)
You can also switch on by pressing the PROG /\ / \/ buttons.
• When you turn the power ON, the screen appears and the POWER/STANDBY light is turned off.
• When you turn the power OFF, the screen goes blank, and the POWER/STANDBY light turns red.
Selecting the Menu Language
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select FUNCTION using the /\ / \/ button and then press the > button.
3. LANGUAGE using the /\ / \/ button and then press the > button.
4. Select the desired menu language using the /\ / \/ button.
5. Press the EXIT button to exit the menu.
Viewing the Status Information
Press the DISPLAY button on the remote control. The TV will display the input source, the picture mode, the sound mode, the
STEREO mode, the sleep time and the current time.
Adjusting the Volume
Adjust the volume using the VOL /\ / \/ button.
Muting the Sound
Press the MUTE button. You can conveniently use the MUTE button when a telephone or a door bell rings. To cancel, press the MUTE
button again.

Prestigio P170DVD-X P200DVD-X 11
ENG
Viewing a Video or DVD
Press the LINE button. For connection and setup procedures, refer to the corresponding chapter of this manual.
Storing Channels Automatically
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select Setup using the /\ / \/ button and then press the > button.
3. Select Auto Program using the /\ / \/ button and then press the > button.
4. Select Country using the /\ / \/ button and then press the > button.
5. Select your country using the /\ / \/ button and then press the > button.
6. Select Search using the /\ / \/ button and then press the > button.
Manual Storing of Channels
When storing channels manually, you can choose:
- Whether or not to store each of the channels found.
- The programme number by which you wish to identify each stored channel.
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select Setup using the /\ / \/ button and then press the > button.
3. Select Manual program using the /\ / \/ button and then press the > button.
4. Select System using the /\ / \/ button and then press the > button. Auto > LP > L > I > DK > BG > Auto
5. Select Program no. using the /\ / \/ button and then press the > button. And press the /\ / \/ button to select the required
channel number.
6. Select Search using the /\ / \/ button and then press the > button. The tune scans the frequency range until the first channel on
the channel that you selected is received on your screen.
7. Select Store using the /\ / \/ button and then press the > button. And press the /\ / \/ button to select the OK.
8. Repeat Step 5 to 7 for each channel to be stored.

12 Prestigio P170DVD-X P200DVD-X
ENG
Channel Name
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select Setup using the /\ / \/ button and then press the > button.
3. Select Manual program using the /\ / \/ button and then press the > button.
4. Select Name using the /\ / \/ button and then press the > button. And press the /\ / \/ </> buttons to edit the name.
/\ / \/: Select the characters (A~ Z, 0~9, -, + ).
</>: move on the previous or next letter.
5. Select Store using the /\ / \/ button and then press the > button. And press the /\ / \/ button to select the OK.
6. Press the EXIT button to exit the menu.

Prestigio P170DVD-X P200DVD-X 13
ENG
Program Edit
This function enables you to delete, copy, move or skip the stored programs.
1. Select the channel to tune using the numeric or channel buttons.
2. Press the TV.MENU button. The OSD MENU will be displayed.
3. Select SETUP using the /\ / \/ button and then press the > button.
4. Select PROGRAM EDIT using the /\ / \/ button and then press the > button.
Delete a Program
1. Select a program to the deleted with the /\ / \/ </> buttons.
2. Press the RED button. The selected program is deleted.
All the following programs are shifted up one position.
Copy a Program
1. Select a program to the copied with the /\ / \/ </> buttons.
2. Press the YELLOW button.
All the following programs are shifted down one position.
Moving a Program
1. Select a program to the moved with the /\ / \/ </> buttons.
2. Press the GREEN button.
3. Move the program to the desired program number with the /\ / \/ </> buttons.
4. Press the GREEN button again to release this function.
Skipping a Program Number
1. Select a program to the skipped with the /\ / \/ </> buttons.
2. Press the BLUE button. The skipped program turns to Magenta.
3. Press the BLUE button again to release this function.
When a program number is skipped it means that you will be unable to select it using the /\ / \/ button during normal TV viewing. If
you want to select the skipped program, directly enter program number with the number buttons or select it in the program edit or
table menu.
Changing Channel
1. Using the CHANNEL buttons. Press the PROG /\ / \/buttons to change channels. You will see all the channels that the TV has
memorized. (The TV must have memorized at least three channels.)
2. Using the NUMBER buttons
- To change to single-digit channels (0~9) faster, press “0” before the single digit. Example: For channel 4, press “0”, then “4”.
- To select a channel over 10, press the -/-- button first. Example: For channel 42, press “-/--”, then “4”, then “2”.
3. Using the Previous Channel. Press the PRE button on the remote control. The TV changed to the last channels to the last channel
you were watching.

14 Prestigio P170DVD-X P200DVD-X
ENG
When the Picture Quality is Poor or Unstable
Use fine tuning to adjust a particular channel for better picture quality when noise interferes, color quality is poor, or the screen is
unstable.
1. Select the channel to tune using the numeric or channel buttons.
2. Press the TV.MENU button. The OSD MENU will be displayed.
3. Select SETUP using the /\ / \/ button and then press the > button.
4. Select MANUAL PROGRAM using the /\ / \/ button and then press the > button.
5. Select FINE TUNE using the /\ / \/ button and then press the > button.
6. Press the /\ / \/ button to fine tune and then press the > button. If you are unable to fine-tune a channel, check that the SYSTEM
settings are correct.
7. Select STORE using the /\ / \/ button and then press the > button. And press the /\ / \/ button to select OK.
8. Press the EXIT button to exit the menu.
Selecting the Picture Status
You can select a video mode from among USER, STANDARD, DYNAMIC, or MILD mode according to your personal preference.
QUICK! Press the P.STD button. Whenever you press this button, PICTURE STATUS changes to
STANDARD >DYNAMIC >MILD >USER mode, in this order.
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select PICTURE using the /\ / \/ button and then press the > button.
3. Select the desired PICTURE STATUS using the /\ / \/ button. Whenever you press this button, PICTURE STATUS changes to
STANDARD >DYNAMIC >MILD >USER mode, in this order.
4. When you have finished, press the EXIT button to exit the menu.
Picture Status
• STANDARD: Select this mode when the surrounding illumination is bright.
• DYNAMIC: Select this mode to increase picture clarity and sharpness.
• MILD: Select this mode when viewing the TV when the light is low.
• USER: Select this mode if you want to adjust the settings according to your personal preferences.

Prestigio P170DVD-X P200DVD-X 15
ENG
Adjusting the Picture Settings
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select PICTURE using the /\ / \/ button and then press the > button.
3. Select the desired item to adjust using the /\ / \/ button and then press the > button.
4. Select the desired status using the </> button. In addition, PICTURE STATUS is automatically changed to USER mode.
5. Press the EXIT button to exit the menu.
Picture
• CONTRAST: Determines the difference in brightness between an object and the background.
• BRIGHTNESS: Determines the brightness of the screen.
• SHARPNESS: Determines the sharpness of an object image.
• COLOR: Determines the color density.
Selecting the Sound Status
You can select a sound mode from among STANDARD, MUSIC, SPEECH or USER mode according to your personal preference.
QUICK! Press the S.STD button. Whenever you press this button, SOUND STATUS changes to STANDARD >
MUSIC > SPEECH > USER mode, in this order.
Sound Status
• STANDARD: Select this to listen to sound normally.
• MUSIC: Select this to listen to the original sound.
• SPEECH: Select this to listen to clear voice sound.
• USER: Select this if you want to adjust the settings according to your personal preferences.
Adjusting the Balance
Determines the volume ratio between the left and right speakers.
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select SOUND using the /\ / \/ button and then press the > button.
3. Select BALANCE using the /\ / \/ button and then press the > button.
4. Select the desired status using the </> button. During the adjustment, an additional adjustment window will be displayed. Also,
the Sound Status is automatically changed to User mode.
5. Press the EXIT button to exit the menu.

16 Prestigio P170DVD-X P200DVD-X
ENG
Adjusting the Equalizer
Determines the volume of the frequency range (low to high tones).
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select SOUND using the /\ / \/ button and then press the > button.
3. Move to the EQUALIZER item using the /\ / \/ button and then press the > button.
4. Move to the User using the /\ / \/ button and then press the > button.
5. Move to the desired frequency using the > button. 120(Low Tone) > 1.5K(Mid Tone) > 10K(High Tone).
6. Select the desired status using the /\ / \/ button.
Choosing a Soundtrack
Quick! Pressing the M/S button. Whenever you press this button, the mode changes to STEREO/MONO
mode, in this order.
- If the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position using the M/S button.
- If the stereo signal is weak( or if intermittent Stereo-Mono) and automatic switching occurs, then switch to the MONO mode.
- When receiving mono sound in the AV mode, connect to the ‘L’ input jack on the panels.
- If the mono sound comes out only from the left speaker, then press the M/S button.
Type of broadcast On-Screen
NICAM STEREO Standard broadcast MONO
Regular+NICAM MONO MONO
NICAM STEREO NICAM STEREO<-> MONO
NICAM DUAL NICAM MAIN -> NICAM SUB
A2 STEREO Standard broadcast MONO
Bilingual or DUAL MAIN <-> SUB
STEREO STEREO <-> MONO
CAUTION: If stereo mode is set to mono, the output is mono even though the broadcast is in stereo.

Prestigio P170DVD-X P200DVD-X 17
ENG
Selecting the AVL Mode
If you switch AVL to on, the set automatically keeps on an equal volume level.
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select SOUND using the /\ / \/ button and then press the > button.
3. Select AVL using the the /\ / \/ button and then press the > button.
4. Select the desired status using the /\ / \/ button.
5. Press the EXIT button to exit the menu.
Changing the Screen Size
•17
You can select a desired screen size for each video.
Press the P.SIZE button.
Whenever you press the P.SIZE button, the screen size changes to WIDE >NORMAL > ZOOM, in this order.
Screen Size Menu
• WIDE: Set the picture to 16:9 wide mode (default).
• NORMAL: Sets the picture to 4:3 normal mode. This is a standard TV screen size.
• ZOOM: Magnifies the size of the picture in a vertical direction.
•20
You can select a desired screen size for each video.
Press the P.SIZE button.
Whenever you press the P.SIZE button, the screen size changes to NORMAL > ZOOM, in this order.
Screen Size Menu
• Normal: Sets the picture to 4:3 normal mode. This is a standard TV screen size.
• Zoom: Magnifies the picture size in a vertical direction.

18 Prestigio P170DVD-X P200DVD-X
ENG
Setting the Clock
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select FUNCTION using the /\ / \/ button and then press the > button.
3. Select TIME using the /\ / \/ button and then press the > button.
4. Move to the Hour using the > button and then set the Hour to the correct time using the /\ / \/ button.
5. Move to the Minute using the > button and then set the Minutes to the correct time using the /\ / \/ button.
6. Press the EXIT button to exit the menu.
Setting the On/Off Timer
You can set the On/Off Timer to automatically turn the TV on and off at a desired time. The current time has to be configured first to
set the On/Off Timer.
1-3. STEP1~STEP3 is the same as that of Setting the clock.
4. Select TIMER using the /\ / \/ button and then press the > button. Select ON using the /\ / \/ button.
- The ON/OFF TIMER works only when the timer is configured to ON.
Example: Turning On At 6:10 AM
5. Move to ON TIME using the /\ / \/ button.
6. Move to the Hours using the > button and then set the Hour to AM 6 using the /\ / \/ button.
7. Move to the Minute using the > button and then set the Minutes to 10 using the /\ / \/ button.
8. Press the > button to finish the ON TIME configuration.
9. Press the EXIT button to exit the menu.
For Off timer setting, select OFF TIME instead of ON TIME.
Selecting the ON Timer Channel
You can configure the channel and volume to play when the TV is turned on by the Timer.

Prestigio P170DVD-X P200DVD-X 19
ENG
1-3. STEP1~STEP3 is the same as that of Setting the clock.
4. Select PROGRAM NO. using the /\ / \/ button and then press the > button.
5. Select the desired channel to watch when the TV is turned on using the /\ / \/ button.
6. Press the EXIT button to exit the menu.
Setting the Sleep Timer
You can shut off the TV after a desired period of time.
Quick! Press the SLEEP button.
Whenever you press this button, the mode is changed to SLEEP OFF > SLEEP 10 > SLEEP 30 > SLEEP 60 >
SLEEP 90 > SLEEP 120 > SLEEP 150 > SLEEP 180 > SLEEP OFF, in this order.
Melody Function
If the MELODY function is turned on, a melody plays whenever the TV is turned on or off.
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select FUNCTION using the /\ / \/ button and then press the > button.
3. Select MELODY using the /\ / \/ button and then press the > button.
4. Select ON using the /\ / \/ button. Whenever you press this button, the Melody function is either on or off.
5. Press the EXIT button to exit the menu.

20 Prestigio P170DVD-X P200DVD-X
ENG
TTX Function
Teletext
Most television channels provide written information services via teletext. Information provided includes:
- Television programme times
- News bulletins and weather forecasts
- Sports results
- Travel information initialized with the factory defaults.
This information is divided into numbered pages (see diagram).
Part Contents
A Selected page number.
B Broadcasting channel identity.
C Current page number or search indications.
D Date and time.
E Text.
F Status information.
Displaying the Teletext Information
You can display Teletext information at any time on your television.
For Teletext information to be displayed correctly, channel reception must be stable; otherwise:
- Information may be missing
- Some pages may not be displayed
1. Select the channel providing the Teletext service using the PREPAGE or NEXTPAGE button.
2. Press the TTX button to activate the teletext mode.
Result: The contents page is displayed. It can be redisplayed at any time by pressing the INDEX button.
3. If you wish to display the actual broadcast at the same time as the teletext page, press the MIX button again.
4. Press the CANCEL button to exit from the teletext display.
Selecting a Page by Number
You can enter the page number directly by pressing the numeric buttons on the remote control.
1. Enter the three-digit page number given in the content by pressing the corresponding numeric buttons.
Result: The current page counter is incremented and the page is then displayed.
2. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display
on a given page, press the HOLD. Press the HOLD again to resume.