Primal Vantage HEH00591 User manual

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
Every year serious injury and even death occurs from hunting related falls. To ensure your safety, please COMPLETELY read and
follow this safety manual and ALL warning labels BEFORE assembling, installing or utilizing this product.
DO NOT USE THIS PRODUCT BEFORE FULLY UNDERSTANDING ALL SAFETY WARNINGS AND INSTRUCTIONS. IF YOU HAVE
QUESTIONS, ARE UNSUREABOUTANY INFORMATION OR NEED ADDITIONAL INFORMATION CONCERNING YOUR PRODUCT,
CONTACT OUR CUSTOMER SERVICE DEPARTMENTAT 1-866-972-6168 OR VISIT WWW.TREESTANDCUSTOMERSERVICE.COM.
KEEPAND MAINTAIN THIS SAFETYAND INSTRUCTION MANUAL IN A SAFE LOCATION FOR FUTURE REFERENCE.
Warning
SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT
A
B
BF
D
E
I
G
H
J
K
N
O
F
G
M
C
*Blind not shown
MODEL: HEH00591
• Tree Size: 9”-18” Diameter
OUTPOST ELITE KIT
©2012 (rev. 04/12)

KRoof/Blind Cover (1)
Vertical Support (1)
J
One hole on side
Right Frame Support (2)
D
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
Side Brace (2)
F
Spring Pins
A
Front Frame Corner (2)
Spring Pins
B
Rear Frame Corner (2)
Front Brace (1)
I
G
Bracket (2)
H
Bottom Tree Brace (1)
Left Frame Support (1)
C
Top Tree Brace (1)
E
Pole (3)
M
PARTS LIST
A
1 Left Rail Support Brace Part # RK-1015
2 Front Frame Corner
2 Rear Frame Corner Part # DFF-100
Part # DRF-100
2 Side Brace Part # RK-1010
Part # RK-1040
1 Right Rail Support Brace Part # RK-1020
1 Roof Cover
Part # RK-1025
Part # DTB-510
B
C
D
E
F
G
H
J1 Front Brace
Part # DBC-583
1 TopTree Brace
1 Vertical Support
K
Part # DTB-500
1 Bottom Tree Brace Part # DB-1005
2 Bracket
I
Buckle Strap (2)
N
MODEL: HEH00591
• Tree Size: 9” - 18” Diameter
OUTPOST ELITE KIT
Skirt (1)
P
2 Buckle Strap
2 M12x55mm Bolt Part # 1255
40 2 M10x40mm Bolt Part # 1040
1 M10 Knob Part # 1600
55
Part # CB-100
M3 Pole Part # DTP-100
N
N
O1 Skirt Part # DST-583
P
1040
ROOF KIT
HARDWARE BLISTER PACK
1255 O
©2012 (rev. 04/12)

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 1 MODEL: HEH00591
OUTPOST ELITE KIT
2. Slide each Side Brace F onto the other end of Front Frame Corner A .
There are three holes on each side brace that MUST be facing the inside
of the frame. SEE CLOSEUP
A
F
F
IA
Spring Pins
1. Slide Front Brace I onto Front Frame Corner A .
AA
I
Spring Pin Spring Pin
F
A
Spring Pin
Closeup
©2012 (rev. 04/12)

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
3. Slide each Rear Frame Corner B into Top Tree Brace E .
The “U” part of the brace MUST be on top of the frame.
SEE CLOSEUP
E
B
Spring Pins
B
B
Spring Pin Spring Pin
BE
Closeup
4. Slide each Rear Frame Corner B into Side Braces F .
B
A
B
F
A
F
I
E
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 2 MODEL: HEH00591
OUTPOST ELITE KIT
©2012 (rev. 04/12)

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
NOTE: ALL WASHERS
ARE AGAINST THE
BOLT HEAD AND THE
NUT UNLESS STATED
OTHERWISE
5. Attach Left Frame Support C on the Right Side
Brace F using 1-M10x40mm bolt. (When you install it
on the tree it will be on the left side.)
40
C
F
D
F
40
6. Attach Right Frame Support D (the one with the nut
on it) on the Left Side Brace F using 1-M10x40mm bolt.
(When you install it on the tree it will be on the right side.)
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 3 MODEL: HEH00591
OUTPOST ELITE KIT
©2012 (rev. 04/12)

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
NOTE: ALL WASHERS
ARE AGAINST THE
BOLT HEAD AND THE
NUT UNLESS STATED
OTHERWISE
H
J
55
H
J
55
E
J
55
G
7. Attach Bracket G to Vertical Support J then attach
to Top Tree Brace E with 1-M12x55mm bolt.
Insert 1-M12x55mm bolt with washer through the
bracket, insert the bolt through the vertical support,
then insert the bolt through the Top Tree Brace and
tighten with the nut.
8. Attach remaining Bracket G to the top of Vertical
Support J then attach to Bottom Tree Brace H with
1-M12x55mm bolt.
Insert 1-M12x55mm bolt with washer through the
bracket, insert the bolt through the vertical support,
then insert the bolt through the Bottom Tree Brace
and tighten with the nut.
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 4 MODEL: HEH00591
OUTPOST ELITE KIT
©2012 (rev. 04/12)

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
NOTE: ALL WASHERS
ARE AGAINST THE
BOLT HEAD AND THE
NUT UNLESS STATED
OTHERWISE
CLOSEUP
C
DO
9. Attach Left and Right Frame Supports to Vertical
Support J using M10 Knob O . The Knob will go
through Left Frame Support C then through
Vertical Post J then tightened through Right
Frame Support D . SEE CLOSEUP
J
C
D
O
J
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 5 MODEL: HEH00591
OUTPOST ELITE KIT
©2012 (rev. 04/12)

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
M
B
A
F
M
A
F
B
10. Insert top Pole M into Front Frame Support A .
Insert middle Pole M into Side Brace F .
Insert bottom Pole M into Rear Frame Support B .
11. Attach Roof/Blind Cover K to the assembled roof
frame by using the self sticking fabric strips on the
front, rear and sides of the frame.
12. Turn the assembled Roof over so the frame is underneath.
Pull the Blind Sides out so the camo is on the outside.
Roll up the Blind Sides and tie them to the attached ties on the
Roof.
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 6 MODEL: HEH00591
OUTPOST ELITE KIT
©2012 (rev. 04/12)

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
13. Raise the Roof Assembly to the tree using a safe
hoist/lift system to 3 feet above the shooting rail of your
treestand.
G
N
HN
Pull strap to desired
length.
BUCKLE STRAP INSTRUCTIONS
Hold buckle as shown
Press down on latch and
insert strap underneath
teeth as shown.
Pull slack to tighten.
Wrap the Buckle Strap around
the back of the tree and insert
the strap through the buckle.
Make sure that the strap is flat
against tree with no slack.
Thread the buckle strap
through one end of the bracket Pull strap over the top of the
bracket, then through the
other side of the bracket.
Pull the strap all the way
through so the buckle end is
against the bracket. The straps
will be attached to the bracket
and hang freely until ready to
be secured to the tree.
14. Attach the Vertical Support to the tree by using the two
Buckle Straps N . Insert one end of the strap through
Bracket G that is attached to Top Tree Brace E . Wrap
the strap around the tree once and insert the other end
into the buckle. (See Buckle Strap Instructions). Pull
strap until it is tight against the tree. Attach the other strap
to Bottom Tree Brace H , by following the above steps
and the Buckle Strap Instructions.
You MUST use a Hoist system to lift the
Roof to the Stand for installation
DO NOT climb the Ladder with the Roof
and Blind in Hand
W A R N I N G
NEVER stand on seat platform to attach roof.
Raise flip-up seat platform to move closer to
tree.
W A R N I N G
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.TREESTANDCUSTOMERSERVICE.COM
ASSEMBLY INSTRUCTIONS PAGE 7 MODEL: HEH00591
OUTPOST ELITE KIT
©2012 (rev. 04/12)