Primax MORFJ3UO User manual

Wireless Blue LED Mouse
User’s Guide
Model : MORFJ3UO
Rating: 1.5V 100mA

1
Introduction
Package Contents
•AA Battery x 1 pic
•User’s Guide x 1
System Requirements
•Pentium processor or equivalent
•At least one USB port (USB 2.0 or 1.1)
•Operating System: Windows® XP with Service Pack 1 or higher,
Windows® Vista, Windows® 7

2
Feature
MORFJ3UO is a mobile size mouse with Nordic new technology Wireless Blue
LED Mouse. The RF distance is more than 10 meter.
MORFJ3UO button uses magnetic face plate design for battery change and
receiver (Build in laptop) storage for an easier operation.
It provides user to more choice to have different color or pattern key as per
personal preference as an add-on value to users.
It uses the receiver (Build in laptop) can storage in mouse with good portable
for users.
It uses only one AA battery as less weight for more portable.
It also provides a low battery indicator on top of the mouse to warning user for
battery change.

3
Function introduction
Insert AA battery
Power On will
auto pairing
Open top enclosure
④③ ①Interchangeable Cover
②Battery Slot
③Left Button
④Right Button
⑤Power Switch
⑥Power LED
⑦Scroll Wheel and Mid button
⑦
⑥
②
⑤
①
y

4
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

5
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. End users must follow the
specific operating instructions for satisfying RF exposure compliance. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.