Primus ARCUS150T Manual

ARCUS150T SETUP

Initial setup
System requirements:
Windows XP / 7 / 8 / 8.1 / 10
1. Turn on your computer.
2. Go to www.primusgaming.com/software
to download the driver software.
3. Run the set up program and follow the
onscreen installation prompts.
4. Once the software installation is complete,
a screen will be displayed notifying the
user to restart the computer, in order to
allow changes to take effect.
5. Connect the headset to the USB port of
your computer after the system has
finished rebooting.
1

Configuration tool
This gaming software allows you to
configure the headset through a single
user-friendly application.
It allows the user to configure four different sound profiles by adjusting the frequency sliders
up or down the dB scale.
Main equalizer
• The default parameter on this menu is set to None.
• This headset virtually recreates the audio atmosphere of different
settings, such as Movie theater, Bathroom, Living room or Corridor.
Sound effects
• Dynamic chat boost, mute and gain controls can be set independently in this interface.
Microphone quality
2

Saving and loading customized
settings.
• After all parameters have been
configured, click on the Save button
to backup your settings.
• Enter in a file name and then press Save
to store it in the computer. You can save
as many configurations as you want.
• The virtual speaker shifter is designed to make the sound rotate clockwise or
counterclockwise in each driver for a more realistic and immersive sound experience.
Virtual 7.1
3
• Click on the Load button to recall a backup configuration file.
• After selecting the file, open it to load and apply the customized settings to the
audio device, as illustrated below.