Primus GLADIUS16000P User guide

GLADIUS16000P SETUP

• Windows XP/ Windows Vista /Windows 7 /Windows 8 /Windows 10
• Available USB port (v1.1/2.0/3.0)
• 5MB of free disk space
1
1
I. WINDOWS
REQUIREMENT

II. SETUP
2

1. Download the gladius software from our website at primusgaming.com/software.
2. Connect the gaming mouse to an available USB port.
3. Double click the GLADIUS16000P_SETUP file.
4. You will be prompted to select the setup language. The available languages are, English or
Spanish. Click the down arrow to choose the preferred language. Once done, click OK.
5. The welcome screen will appear. Click on Next to initiate the setup process.
3

6. Select the destination where you want the software to be installed. We recommend keeping
the default path, however you can choose a different location if desired. Please note the
software will require 4.4MB of free disk space. Click Next to continue.
7. Select Start Menu folder location where you want the software to be displayed. The default
location is Primus\GLADIUS16000P. You may change this path if desired. Click Next when done.
4

8. You are now ready to install your brand new Primus Gladius16000P gaming mouse.
Click on Install.
9. When downloading is complete, click on Finish to conclude the setup.
10. Double click the GLADIUS16000P Gaming Mouse desktop icon to launch the Main Interface.
5

III. MAIN
SOFTWARE
INTERFACE
6

7
 This gaming software allows you to configure the mouse buttons, sensitivity, scrolling speed,
double-click speed, polling rate and profiles through a single user-friendly application.
 The Restore, Apply and Cancel buttons on the lower right corner of the screen give you the option
of storing, restoring to default or discarding any newly selected configuration parameters.

8
1. Key settings
The software supports custom buttons:
• Mouse button: Left, Center, Right, Back, and Forward
• Game configurations: Fire button, 3 Clicks, Key combination, and Macro
• Multimedia and Internet command: Media Player, Play/Pause, Next, Previous, Stop, Mute, Volume
up, Volume down, Email, Calculator, Explorer, and Home page
• DPI: DPI+, DPI-, and DPI loop
• DPI lock: All DPI values
• Disable button
1.1 Setting up mouse buttons:
- Click on any mouse button you wish to change. This
will bring up a sub menu of available commands.
- Choose one and then click Apply to save the setting.

1.2 Key Combination mouse button:
- Click on the button you wish to change to bring up the key menu. Then click on Key
combination.
- For illustration purposes, we will change the Middle button to a Key combination button.
- The following popup window will be displayed:
9