Primus GLADIUS8200T User manual

GLADIUS8200T SETUP

C. How to record a Macro
1. On the Macro manager section, click
New and choose a name to identify the
new macro.
2. Click Start record. You may choose the
loop times and also the delay in
keystroke sequence.
3. When done, click Stop record followed
by Apply.
4. Macros can be assigned to the 1-4 and
7-8 buttons of the mouse.
Note: The default left click can only
be customized after its function is
assigned to another button on
the mouse.
5. Once the macro is created, go to the
button functions settings. From the
drop down menu, choose Macro and
then select the macro profile you just
recorded.
6. When the window on the right pops up,
choose the macro from the list and also
the action that will bring the macro to
an end. When done, click OK.
C.

Product layout
1. Braided cable
2. Gaming-grade rubberized scroll wheel
3. Omron micro switches
4. Side keys
5. DPI switch
6. Anti-slip grip sides
7. Logo and palm RGB backlight
8. High-precision optical sensor
9. Large glide metal feet and surface
10. Molded USB plug
Default button assignment
1. Left click
2. Right click
3. Wheel click
Scroll up
Scroll down
4. DPI cycle:
DPI setting #1 = 1000
DPI setting #2 = 1500
DPI setting #3 = 2500
DPI setting #4 = 3000
DPI setting #5 = 5500
DPI setting #6 = 8200
5. Forward
6. Backward
11
1
3
2
4
2
4
5
7
3
68
9
5
6
Six strategically placed buttons
10

Initial setup
System requirements:
Windows XP / 7 / 8 / 8.1 / 10
1. Turn on your computer.
2. Go to
https://www.primusgaming.com/software/
to download the gaming mouse software.
3. Run the installer program and follow the
onscreen installation prompts.
4. Once the software installation is complete, a
screen will be displayed notifying the user to
restart the computer, in order to allow
changes to take effect.
5. Connect the mouse to the USB port of your
computer after the system has finished
rebooting.
6. Go to our webpage periodically to check for
any software updates that might be
available.
2

1
1
2
2
4
3
5
3
4
6
7
Configuration tool
This gaming software allows you to
configure the mouse through a single
user-friendly application.
A. Basic settings
1. Button function settings:
8 commands with selectable actions
2. Polling rate settings
3. Light effects
4. DPI parameters
5. Gaming profiles: 5 different configurations
are available
6. Color palette
7. Confirmation buttons
B. Advanced settings
1. Speed parameters for the mouse click,
scroll and movement
2. Macro manager section
3. Gaming profiles
3.1 Two additional modes (A-B) on each profile
How to set up additional modes:
- Mode A: assign the SHIFT setting to any
button on the mouse. Select the mouse
button and choose from the drop-down
list the SHIFT option, click on Apply
to save.
- Mode B: assign any button setting to any
button on the mouse as needed. Select the
mouse button and choose any setting
from the drop-down list, click on apply to
save. Now the mouse buttons will have
two different functions for modes A and B.
How to use additional modes:
- Press and hold the button that you
programmed with SHIFT setting plus the
mouse button that you previously
programmed for mode B setting.
- You must perform the same process for
each button that you configured with
dual function.
- To restore the original function, press the
Restore button to reset the mouse to its
factory default values.
4. Confirmation buttons
3
A.
B.