
5. Wiring Diagram:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
No. No.
Mode Mode
4. Function Mode:
RGB Jumping
7 Color Jumping
White Strobe
7 Color Strobe
Red Fade out and Fade in
Green Fade out and Fade in
Blue Fade out and Fade in
Yellow Fade out and Fade in
Purple Fade out and Fade in
Cyan Fade out and Fade in
White Fade out and Fade in
RGB Fade out and Fade in
Red/Green Color Smooth
Red/Blue
Green/Blue Color Smooth
Red/Yellow Color Smooth
Green/Cyan Color Smooth
Blue/Purple Color Smooth
Green/Yellow Color Smooth
Blue/Cyan Color Smooth
Red/Purple Color Smooth
Blue/White Color Smooth
Yellow/Purple/Cyan Color Smooth
RGB Color Smooth
7 Color Smooth
Color Smooth
Note: Speed and brightness are adjustable.
6. Attention:
6.1 The product shall be installed and serviced by the qualified person.
6.2 This product is non-waterproof. When installed outdoors please ensure it is mounted in a
water proof enclosure.
6.3 Proper heat dissipation will prolong the working life of the controller. Please ensure good
ventilation.
6.4 Please check if the output voltage of the LED power supply used comply with the
working
voltage of the product.
6.5 Please ensure that adequate sized cable is used from the controller to the LED lights to
carry the current. Please also ensure that the cable is secured tightly in the connector.
6.6 Ensure all wire connections and polarities are correct before applying power to avoid any
damages to the lights.
6.7 If a fault occurs, please return the product to Prism Lighting Group. Do not attempt to fix
this product by yourself.
7.1 We provide lifelong technical assistance with this product:
A 5-year warranty is given from the date of purchase. The warranty is for repair or
replacement.
For faults beyond the 5-year warranty, we reserve the right to charge for time and
parts.
7.2 Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to
excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
7.3 Repair or replacement as provided under this warranty is the exclusive remedy to
the customer. We shall not be liable for any incidental or consequential damages for
breach of any stipulation in this warranty.
7.4 Any amendment or adjustment to this warranty must be approved in writing by our
company only.
★This manual only applies to this model. We reserve the right to make changes without
prior notice.
7. Warranty Agreement:
PLG-330-8A
RGB Controller