Pro 6 Arcadia Air Runner User manual
Arcadia Air Runner
Non Motorized Treadmill
ASSEMBLY INSTRUCTIONS
Step 1. Leveling the treadmill.
To adjust the Universal adjustable pad in the bottom of main frame until pads firmly flat on the ground
or floor.
WARNING: It’s extremely important that pads are correctly adjust to proper postions. An
unbalanced unit may cause running belt misalignment or other issues.
Step 2. Mount the right console mast
to the main frame.
Universal adjustable pad x 4 pcs
Step 3. Mount the left console mast to the main frame.
Hex Socket Button Head Screws
M10 x 50L x 3 pcs
NOTE: Please put all connections in proper position before assemble the console mast.
A. Connect RPM sensor wire as below.
B. The default value of resistance is 6 before connecting
the tension steel wire, please shift the gear to level 1
after connection.(As below)
C. Put all connections in proper position.
Arcadia Air Runner
Non Motorized Treadmill
