Insportline SANGAR IN 12999 User manual

USER MANUAL –EN
IN 12999 Treadmill inSPORTline SANGAR

2
CONTENTS
IMPORTANT SAFETY PRECAUTIONS ................................................................................................. 3
ASSEMBLY INSTRUCTIONS................................................................................................................. 4
Assembly steps.................................................................................................................................... 5
Folding instuctions ............................................................................................................................... 7
TECHNICAL PARAMETERS .................................................................................................................. 8
GROUND GUIDE .................................................................................................................................... 8
OPERATION GUIDE............................................................................................................................... 9
WIndow display.................................................................................................................................... 9
Button Function.................................................................................................................................. 10
Quick start-up (manual) ..................................................................................................................... 10
Manual mode ..................................................................................................................................... 11
Preset programs ................................................................................................................................ 11
User’s program .................................................................................................................................. 11
HRC program (option)........................................................................................................................ 12
Safety-lock function............................................................................................................................ 14
Save on power function ..................................................................................................................... 14
MP3 (Option)...................................................................................................................................... 14
Turn off............................................................................................................................................... 14
EXERCISE INSTRUCTIONS ................................................................................................................ 14
MAINTENANCE INSTRUCTIONS ........................................................................................................ 15
Walking belt centering and tension adjustment................................................................................. 15
Cleaning............................................................................................................................................. 16
Walking belt and deck lubrication ...................................................................................................... 16
EXPLODED DRAWING......................................................................................................................... 17
PARTS LIST.......................................................................................................................................... 18
TROUBLE SHOOTING GUIDE............................................................................................................. 19
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS................................................. 20

3
IMPORTANT SAFETY PRECAUTIONS
1. Plug the power cord of the treadmill directly into a dedicated grounded circuit. This product
must be grounded well. If it has breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock.
2. Position the treadmill on a clean and flat surface with at least 2m*1m area. Do not place the
treadmill on thick carpet as it may interfere with proper ventilation. Also, do not place the
treadmill near water or outdoors. Provide a minimum of 0,6 meter clearance between the
treadmill and any fixed object.
3. Position the treadmill where the wall plug is visible and accessible.
4. NEVER start the treadmill while you are standing on the walking belt. After turning the power
on and adjusting the speed control, there may be a pause before the walking belt begins to
move, ALWAYS stand on the foot rails on the sides of the frame until the belt is moving.
5. Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting
clothing that could become caught in the treadmill. Always wear running or aerobic shoes with
rubber soles.
6. Always unplug the power cord before removing the treadmill motor cover.
7. Keep small children away from the treadmill during operation.
8. Always hold the handrails when initially walking or running on the treadmill, until you are
comfortable with the use of the treadmill.
9. Always attach the safety pull pin rope to your clothing when using the treadmill. If the treadmill
should suddenly increase in speed due to an electronics failure or the speed being
inadvertently increased, the treadmill will come to a sudden stop when the pull pin is
disengaged from the console.
10. When the treadmill is not being used, the power cord should be unplugged and the safety pull
pin should be removed.
11. Before starting any exercise program, consult with your physician or health professional. He or
she can help to establish the exercise frequency, intensity (target heart zone) and time
appropriate to your particular age and physical condition. If you have any pain or tightness in
your chest, an irregular heartbeat, shortness of breath, feel faint or have any discomfort while
you exercise, STOP IMMEDIATELY! Consult your physician before continuing.
12. If you observe any damage or wear on the mains plug or on any section of the mains lead
then please have these replaced immediately by a qualified electrician –do not attempt to
change or repair these yourself.
13. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
14. Put your feet on the side rail before using the treadmill, and always attach the safety pull pin
rope to your clothing. Hold the handle bar before the running belt moving well (feel the running
speed by your single foot before using it). To avoid loss balance, please slow down the speed
to the lowest or take off the safety. And hold the handle bar to jump to the side rail when
emergency or the safety key is not attached.
15. No adjustable part has to stand out. It could obstruct movements.
16. Weight limit: max. 100 kg
17. Category: HC (EN957 standard) suitable for home use.
18. WARNING! The hart rate monitor may not be accurate. Overloading during training may
cause serious injury or death. If you feel any discomfort, immediately stop the exercise!

4
ASSEMBLY INSTRUCTIONS
When you open the carton, you will find the below spare parts:
Spare parts list
NO.
DESCRIPTION
SPEC.
Q’TY
NO.
DESCRIPTION
SPEC.
Q’TY
A
Main Frame
1
41
Bolt
M6*12
5
B
Left Upright
1
46
Bolt
M8*40
2
C
Right Upright
1
50
Bolt
M8*20
2
11
5# Allen
Wrench
5 mm
1
51
ARC Washer
8
4
12
Allen Wrench
with screw
driver
S=13, 14,
15
1
54
Screw
ST4.0*15
4
17
Left Water
Bottle Rack
1
57
Spring Washer
8
2
18
Right Water
Bottle rack
1
59
Lock Washer
8
2
37
Nut
M8
2
73
Safety Key
1
Assembly tools

5
Assembly steps
Notice: Do not turn power on before assembly is done.
Step 1:
Open the carton, take out the MAIN FRAME (A) and put on the ground.
Step 2:
Use Allen Wrench (12), Bolt (41), lock the left Computer set (A-1) onto the main frame.
ATTENTION: Please keep all the computer wires to be inside of the computer A-1.
Step 3:
Hole up the Left & Right upright, and lock the Left Water Bottle Rack (17) & Right Water Bottle Rack
(18) onto the Computer Frame (A-1) by Screw (54).

6
Step 4:
1. Use 5# wrench (11), Lock the Upright (A-2) onto the Main Frame (A-3) by Bolt M8*40 (#46)
and Lock Washer (#59).
2. Use 5# wrench (11), Lock the Upright (A-2) onto the Main Frame (A-3) by Bolt M8*20 (#50)
and ARC Washer (51).
ATTENTION: Please not damage the wires when you fold the upright.
Step 5:
1. Connect the Sensor Wire (B-1, B-2) of the Handle Bar set (B) with the Computer Middle Wire
(83) of the Main Frame A.
2. Use Allen Wrench with screwdriver (11), lock the Handle Bar (B) onto the Main Frame (A) by
Nut M8 (37), Spring Washer (57) and ARC Washer (51).
3. Connect the Sensor Wire (C-1, C-2) of the Handle Bar set (C) with the Computer Middle Wire
(85, 86) of the Main Frame A.
4. Use Allen Wrench with screwdriver (11), lock the Handle Bar (C) onto the Main Frame (A) by
Nut M8 (37), Spring Washer (57) and ARC Washer (51).
ATTENTION: Please don’t damage the wires while doing the assembly.

7
Attention: Please don’t put the power on until you make sure that all the above steps are
finished and all the bolts are tightened well. Please also read all the following instructions
when you operate the treadmill.
Folding instuctions
Pulling up:
Hold the place F & F1, and pull up the main frame as the direction of the arrow till you hear the sound
from the Cylinder (13).
Pulling down:
Hold the place F1 & P, kick the Cylinder (13) on position G by your foot, and push the running deck
down to the position F,then the main frame will decline automatically.

8
TECHNICAL PARAMETERS
GROUND GUIDE
This product must be grounded. If it malfunctions or breaks down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER –Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product –if it doesn’t fit the outlet,have a
proper outlet installed by a qualified electrician. This product is for use on a nominal 220-voltcircuit and
has a grounding plug that looks like the plug illustrated in sketch A in following figure. Makesure that
the product is connected to an outlet with the same configuration as the plug. No adaptershould be
used with this product.

9
OPERATION GUIDE
WIndow display
1. “TIME” Window: Display the running exercise time. Counting from 0:00 to 99:59, when it
reaches 99:59, the speed of the treadmill will be slowly decreased. After the treadmill stops
completely, the unit will become STANDBY status after 5 seconds. Counting from the target
data down to 0:00, when it reaches 0:00, the speed of the treadmill will also be slowly
decreased. After the treadmill stops completely, the unit will become STANDBY state.
2. “DIS.”: Display the exercise distance. Counting from 0.0 to 99.9, when it is over 99.9, the
display will be reset to be 0.0 and the counting will start again from 0.0 to 99.9. Counting from
the target distance down to 0.0, when it reaches 0.0, the speed of the treadmill will also be
slowly decreased. After the treadmill stops completely, the unit will become STANDBY state.
3. “SPEED” window: Under setting and selecting state, it will display P1-P6-U1-U3-HRC -FAT.
Under operation state, it will display the current speed, and the range is 1.0-12.0 KM/H.
4. “PULSE” Window: Display the runner’s pulse data. When the runner grasps the hand pulse, it
will test pulse after 5 seconds and show the data in window, the relevant light will show at the

10
same time, pulse range is 50 - 200 hypo/min. (the data is just for reference, can not be used
as medical data).
5. “CAL.” Window: Display the runner’s calories. Counting from 0 to 999, when it is over 999, the
display will be reset to be 0 and the counting will start again from 0 to 999. Counting from the
target data down to 0, when it reaches 0, the speed of the treadmill will also be slowly
decreased. After the treadmill stops completely, the unit will become STANDBY state.
Button Function
1. “PROGRAM” Button: When the treadmill is under standby state, press this button to choose
the exercise time “0:00” or the following 12 operation modes of “P1-P2-P3-P4-P5-P6 -U1-U2-
U3-HRC-FAT” (HRC is heart rate control program, FAT is the body fat testing function).
Manual mode is the default mode with speed 1.0 KM/H. (0:00 is manual mode, P1-P6 is
preset program and U1-U3 is the user’s self-set program).
2. “MODE” Button：Press this button to choose the modes: “0:00”, “15:00”, “1.0”, “50” (“0:00” is
manual mode, “15:00” is the time count-down mode, “1.0” is the distance count-down mode ,
“50” is the calorie count-down mode). When you choose each mode, you can press the
speed button or incline button to set the target count-down data, after that, press the START
button to start the treadmill.
3. “START” button：When the power is on and the safety key is attached onto the console,
pressing this button at any time can start the treadmill.
4. “STOP” button: When running the treadmill, press this button at any time to stop the treadmill
and return all the data to 0.
5. “SPEED+”, “SPEED-“: After starting the treadmill, press “SPEED+”, “SPEED-“ button to adjust
the speed and the adjustment range of speed is 0.1km each time. When pressing “SPEED+”
or “SPEED-“ button for more than 0.5 second, the speed will be continuously increased or
decreased.
6. “SPEED：3、6、9、12” : Quick access button. You can do quick setting of the speed by
pressing these buttons.
7. Total Distance Display: Under STANDBY State, press both SPEED+ and SPEED- for
about 3 seconds, the total distance data will be shown in the TIME window, and the
range is 0-9999 KM. When it is over 9999, the display will be reset to be 0 and the
counting will start again from 0.0 to 9999. After that, press STOP or move away the
safety-key to put back again to enter the STANDBY state.
Quick start-up (manual)
1. Put the power switch on, and then attach the safety key to the computer.
2. Press START button，the system will enter into 3 seconds count-down, the buzzer will make
the sound “Bi” and the SPEED window will start to count down, then the speed will run
1.0km/hour after 3 seconds.
3. After start-up, you can use speed up or down to adjust the speed up or down.
The operation during exercise process:
1. Pressing speed-down will decrease the running speed.
2. Pressing speed-up will increase the running speed.
3. Pressing STOP will reduce the speed until the treadmill stops.
4. When the user holds the hand pulse for about 5 seconds, it will display pulse data.

11
Manual mode
1. When the treadmill is under the standby state, press START button, the treadmill will start to
run from the speed of 1.0km/h. The other windows will also start to count up from “0”, press
“SPEED+”, “SPEED-” to change the speed.
2. Set the TIME, when the treadmill is under the standby state, press “MODE” button to enter into
time count-down mode, the TIME window will display “15：00” and glitter. Press “SPEED+”,
“SPEED-” to set the time that you need. The setting range is 5:00-99:00.
3. In TIME count down mode, press “MODE“ button to enter into distance count-down mode, the
DISTANCE window will display “1.0” and glitter. Press “SPEED+”, “SPEED-” to set up the
distance that you need. The setting range is 0.5—99.9.
4. In DISTANCE count down mode, press “MODE” button to enter into calories count down
mode, the CAL window will display “50” and glitter. Press “SPEED+”, “SPEED-” to set up the
calories that you need. The setting range is 10-999.
5. When setting is finished, press “START” button and the treadmill will run after 3 seconds.
Press “SPEED+”, “SPEED-” to adjust the speed; press the STOP button, the treadmill will
stop.
Preset programs
This treadmill has 6 preset programs. Under the standby state, press “PROGRAM” button, the SPEED
window will display P1-P6. After choosing the program that you need, the TIME window will flash and
display the preset time 10:00, press “SPEED+”, “SPEED-” to set up the exercise time that you need.
Press “START” button to start the preset program. The preset program is divided into 10 sections.
Each exercise time=the setting time/10. When the system enters into the next section, it will make 3
sounds “Bi—Bi—Bi“, then the speed and the incline will change according to the setting speed and
incline of the program, during this period, you can press “SPEED+”, “SPEED-” to change the SPEED
as you need. But when the program enters into the next section, the system will make 3 sounds “Bi—
Bi—Bi“, the speed will turn to be the speed of the preset program automatically. After the program is
completed, the system will make 3 sounds “Bi—Bi—Bi”, and the treadmill will decrease the speed
slowly to END. After 5 seconds, the treadmill will enter into standby state.
Program exercise chart:
Each program is divided into 10 section for the exercise time and each time section has it’s speed and
incline accordingly.
User’s program
U1, U2, U3: Besides the 6 preset programs, you can also set up another 3 user’s programs for user’s
programs as you need: U1, U2, U3.

12
1. User’s programs setting: Under standby state, press the button “PROGRAM” until it shows
the user’s program（U1-U3）, then press the “MODE” to enter into the setting. For the first
time section, press “SPEED+”、“SPEED -” to set the speed. Press “MODE” to complete the
setting of the first time section and go on to the setting of the next section until all the 10
sections are completed. The set data will be saved until next time you reset it. It won’t be lost
due to the power off
2. Start-up of the user’s program: A. Under the standby state, press “PROGRAM” until it shows
the user’s program（U1-U3）, set the running time that you need and press the “START”
button to start the treadmill.
B. After the user’s programs and running time is set, pressing the START button can start the
treadmill immediately.
3. Explanation of User’s program setting
Each user’s program divides running time to be ten same sections, and the treadmill can
only be started after the setting of speed, incline and the running time is finished.
HRC program (option)
AGE
BPM
AGE
BPM
AGE
BPM
H
Default
L
H
Default
L
H
Default
L
15
195
123
123
37
174
110
110
59
153
97
97
16
194
122
122
38
173
109
109
60
152
96
96
17
193
122
122
39
172
109
109
61
151
95
95
18
192
121
121
40
171
108
108
62
150
95
95
19
191
121
121
41
170
107
107
63
149
94
94
20
190
120
120
42
169
107
107
64
148
94
94
21
189
119
119
43
168
106
106
65
147
93
93
22
188
119
119
44
167
106
106
66
146
92
92
23
187
118
118
45
166
105
105
67
145
92
92
24
186
118
118
46
165
104
104
68
144
91
91
25
185
117
117
47
164
103
103
69
143
91
91
26
184
116
116
48
163
103
103
70
143
90
90
27
183
116
116
49
162
103
103
71
142
90
89
28
182
115
115
50
162
102
102
72
141
90
89
29
181
115
115
51
161
101
101
73
140
90
88
30
181
114
114
52
160
101
101
74
139
90
88
31
180
113
113
53
159
100
100
75
138
90
87
32
179
113
113
54
158
100
100
76
137
90
86
33
178
112
112
55
157
99
99
77
136
90
86
34
177
112
112
56
156
98
98
78
135
90
85
35
176
111
111
57
155
98
98
79
134
90
85
36
175
110
110
58
154
97
97
80
133
90
84
L-H: The adjustable pulse range (from low to high)

13
1. When the treadmill is on, press “PROGRAM” button till the speed window display “HRC”. The
highest speed is 10.0km/h or 6mph (NOTE: Press “START” button when window shows HRC,
the program will automatically provide the parameter: age 30, pulse: 114)
2. With pressing “MODE” button to set the age, TIME window will show the default age 30. Uses
can choose the suitable age range; the adjustable range is 15-80 (HRC Chart will give the
detail for reference)
3. Press ENTER button again to save the age, the computer will offer a suitable pulse on the
window for reference. Users can choose the pulse through the “SPEED+”、“SPEED –” button
as well; the adjustable range is 84-195 (HRC Chart will give the detail for reference)
4. After choosing the age and pulse, press the MODE button again to enter the time setting
system. The default time is 10:00. Users can press “SPEED+”、“SPEED –” button to change
the time; the adjustable range is 10:00-99:00
5. Press “MODE” button to enter the start system or press “START” button directly to start it.
6. Under the HRC program, users can press “SPEED+”、“SPEED –” button to change the speed
and incline level, but it will automatically change the speed and incline level to your goal.
7. The first 1 minute before exercise is the warm-up phase. The system won’t change the speed
and incline level, so change it yourself. 1 minute later, system will increase the speed range
automatically 0.5km or 0.5mile every time according your pulse. If when it comes to 10km/h or
6mph, it still cannot reach your goal, the system will increase the incline level (one level each
time) for the goal. When it comes to the users’ goal, the speed and incline level won’t change.
Attention: The HRC program must use chest belt to test your heart rate. Make sure that the
chest belt must be attached closely to the chest and the skin.
Range of program:
Body tester
At the beginning state, press “ PROGRAM” continually to enter into the body FAT tester, press
“MODE“ enter F-1, F-2, F-3, F-4, F-5 (F-1 SEX, F-2 AGE, F-3 HEIGHT, F-4 WEIGHT, F-5 FAT
TESTER ), Press “SPEED+”, “SPEED -” to set F-1 ---- F-4 ( refer to the following chart), after that,
press “ MODE” to set F-5, then grasp the hand pulse, the window will display your body quality index
after 3 seconds. The body quality index is to test the relation between height and weight, not referring

14
to the body proportion. The body FAT suits for any male and female, offering reference information of
adjusting people’s weight. The ideal FAT should be 20-25, if under 19, it means too thin. If between 25
and 29, it means overweight, if over 30, it means obesity. (The data is just for reference, can not be
used as medicinal data).
Safety-lock function
Pull out the safety pulling rope, then the treadmill will stop immediately. All the windows
display“―――”, the buzzer will make 3 sound “Bi-Bi-Bi”, and the treadmill become stopped. Attach the
magnet end of the safety lock to the console, the treadmill will be at the beginning of running.
Save on power function
The system is with SAVE-ON power function. Under the standby state, without operating the treadmill
for 10 minutes, the SAVE-ON power function will be available, and the display will be closed up. You
can press any button to re-wake up the display.
MP3 (Option)
When Mp3 is connected, the console is able to play music. The volume is controlled on the Mp3.
Please pay attention to adjust the volume properly for having better timbre and protecting the inner
voice-frequency circuit.
Turn off
Turn off the power: You can turn off the power to stop the treadmill, which won’t damage the treadmill
at any time.
Caution
We recommend that you maintain a slow speed in the beginning of exercise and hold on the
handrails until you become comfortable and familiar with the treadmill.
Attach the magnet end of the safety lock to the console and also attach the clip of the safety
pulling rope to your clothing.
To end your workout safely, press the STOP button or pull out the safety pulling rope, then
thetreadmill will stop immediately.
EXERCISE INSTRUCTIONS
1. The Warm Up Phase
This stage helps get the blood flowing around the body and the muscles working properly. It
will also reduce the risk of cramp and muscle injury. It is advisable to do a few stretching

15
exercises as shown below. Each stretch should be held for approximately 30 seconds, do not
force or jerk your muscles into a stretch - if it hurts, STOP.
2. The Exercise Phase
This is the stage where you put the effort in. After regular use, the muscles in your legs will
become Stronger. It is very important to maintain a steady tempo throughout. The rate of work
should be sufficient to raise your heart beat into the target zone shown on the graph below.
This stage should last for a minimum of 12 minutes.
3. The Cool Down Phase
This stage is to let your Cardio-vascular System and muscles wind down. This is a repeat of
the warm up exercise e.g. reduce your tempo, continue for approximately 5 minutes. The
stretching exercises should now be repeated, again remembering not to force or jerk your
muscles into the stretch. As you get fitter you may need to train longer and harder. It is
advisable to train at least three times a week, and if possible space your workouts evenly
throughout the week. To tone muscle while on your Treadmill you will need to have the
resistance set quite high. This will put more strain on our leg muscles and may mean you
cannot train for as long as you would like. If you are also trying to improve your fitness you
need to alter your training program. You should train as normal during the warm up and cool
down phases, but towards the end of the exercise phase you should
increase resistance, making your legs work harden than normal. You may have to reduce your
speed to keep your heart rate in the target zone. The important factor here is the amount of
effort you put in. The harder and longer you work the more calories you will burn. Effectively
this is the same as if you were training to improve your fitness, the difference is the goal.
MAINTENANCE INSTRUCTIONS
Walking belt centering and tension adjustment
DO NOT OVERTIGHTEN the walking belt. This may cause reduced motor performance and
excessive roller wear.
TO CENTER WALKING BELT:
Place treadmill on a level surface
Run treadmill at approximately 3.5 mph
If the belt has drifted to the right, turn the right adjusting bolt 1/2 turn clockwise and the left
adjusting bolt 1/2 turn counterclockwise
If the belt has drifted to the left, turn the left adjusting bolt 1/2 turn clockwise and the right
adjusting bolt 1/2 turn counterclockwise

16
Picture A: If the belt has drifted to the RIGHT Picture B: If the belt has drifted to the LEFT
WARNING: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE
CLEANING OR SERVICING THE UNIT.
Cleaning
General cleaning or the unit will greatly prolong the treadmill. Keep treadmill clean by dusting
regularly. Be sure to clean the exposed part of the deck on either side of the walking belt and also the
side rails. This reduces the build up of foreign material underneath the walking belt. The top of the belt
may be cleaned with a wet, soapy cloth. Be careful to keep liquid away from inside the motorized
treadmill frame or from underneath the belt.
Warning: Always unplug the treadmill from the electrical outlet before removing the motor
cover. At least once a year remove the motor cover and vacuum under the motor cover.
Walking belt and deck lubrication
This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction
may play a major role in the function and life of your treadmill, thus requiring periodic lubrication. We
recommend a periodic inspection of the deck.
We recommend lubrication of the deck according to the following timetable:
Light user (less than 3 hours/ week) annually
Medium user (3-5 hours/ week) every six months
Heavy user (more than 5 hours/ week) every three months

17
EXPLODED DRAWING

18
PARTS LIST
NO
DESC.
SPEC.
Q´TY
NO
DESC.
SPEC.
Q´TY
1
Base Main Frame
1
51
ARC Washer
8
4
2
Main Frame
1
52
Bolt
M4*8
6
3
Upright Frame
1
53
Bolt
M6*22
8
4
Computer Frame
1
54
Screw
ST4.0*15
16
5
Wheel Base Frame
1
55
Screw
ST4.2*45
2
6
Handle Bar Tube Frame
2
56
Flat Washer
8
8
7
Motor Base
1
57
Spring Washer
8
8
8
Enhance Tube
1
58
Lock Washer
6
5
9
Front Roller
1
59
Lock Washer
8
8
10
Rear Roller
6
60
Screw
ST2.9*8
2
11
5# Wrench
5 mm
1
61
Screw
S2.9*6.5
8
12
Allen Wrench With
Screw Driwer
S=13,
14, 15
1
62
Bolt
M6*16
2
13
Cylinder
1
63
Screw
ST4.2*9.5
1
14
Safety Key Steel Board
1
64
Bolt
M5*14
2
15
Computer Top Cover
1
65
Nut
M5
2
16
Computer Bottom Cover
1
66
Computer
1
17
Left Water Bottle Rack
1
67
Control Board
1
18
Right Water Bottle Rack
1
68
Pulse With Start
Button
1
19
Motor Top Cover
1
69
Pulse With Speed
Button
1
20
Motor Bottom Cover
1
70
Computer Bottom
Wire
1
21
Handle Bar End Cap
2
71
Magnetic Sensor
1
22
Left End Cap
1
72
Safety Switch
1
23
Right End Cap
1
73
Safety Key
1
24
Anti-Slip Pad
2
74
DC Motor
1
25
Transportation Wheel
2
75
Magnetic Core
1
26
Driving Belt
1
76
Magnetic Ring
1
27
Rubber Pad
4
77
Square Switch
1
28
Foam Grip
2
78
Running Board
1
29
Running Deck Cushion
Pad
8
79
Power Wire
1
30
Power Wire Clip
1
80
Film Sticker
1
31
Running Belt
1
81
Computer Sticker
1
32
Ring Wire Protector
2
82
Key-Press Up Wire
2

19
33
Moving Wheel
2
83
Pulse Key-Press
Up Wire
2
34
Flat Foot Pad
4
84
Bellows
1
35
EVA Pad
1
a-1
AC Single Wire
1
36
Safety Key Spring Ball
1
a-2
AC Single Wire
1
37
Nut
M8
8
b-1
Loudspeaker (100)
2
38
Bolt
M8*25
1
b-2
Loudspeaker Press
Board
2
39
Bolt
M4*16
3
b-3
Screw
4
40
Bolt
M5*8
5
b-4
MP3 Connection
Wire
1
41
Bolt
M6*12
9
b-5
Audio Plug
Connection Wire
1
42
Bolt
M6*55
3
c-1
HRC Receiver
Chest
Belt
Option
1
43
Bolt
M8*12
2
c-2
HRC Connection
Wire
Chest
Belt
Option
1
44
Bolt
M8*16
4
c-3
Chest Belt
1
45
Bolt
M8*25
1
46
Bolt
M8*40
7
47
Bolt
M10*30
2
48
Bolt
M6*16
4
49
Bolt
M8*35
2
50
Bolt
M8*20
2
TROUBLE SHOOTING GUIDE
1. No display on the console after the power is started:
The probable reason is that the wire from the console to the bottom control board is not
connected well or the transformer is burnt out. Take off the upright frame tubes and check
every single connection part of the wires from the console to the bottom control board and
make sure that all the wires are connected well. If the problem is caused by the defective
wires or the defective transformer, please do the replacement by the new wires or transformer.
2. E01 —Communication failure:
The probable reason is that the communication from the console to the bottom control board is
stuck. Check every single connection part of the wires from the console to the bottom control
board and make sure that all the wires are connected well. If the problem is caused by the
defective wires, do the replacement by the new wires.
3. E02 —Burst clash protection:
Check if the voltage is lower than 50% of the normal voltage and do the testing again by the
correct voltage. Check if the control board has strange smell, if it is, please use a new control
board to do the replacement. Check if the motor wires are connected well, and re-connect the
motor wires well.
4. E03 —No sensor signal:

20
The probable reason is that the speed sensor signal has not been received during 10
seconds, check if the sensor signal light of the bottom control board is flashing, if not, please
use the new part to do the replacement. Check if the sensor plug is connected well or if the
magnetic sensor is broken, re-connect the sensor plug or change the magnetic sensor with the
new one. Check if it DC motor is work well or the motor wire is connected well. If not, connect
it well or change a new motor.
5. E05 —Current overload protection:
The probable reason is that the user’s weight is over limit loading and causes too much
current, so the unit starts self-protection system. If a certain part of the treadmill is stuck, it
may also cause the problems that the motor can not rotate, the loading is over the limit and
the current is too much. Adjust the treadmill well and restart the unit power. In addition, check
if the motor has the overloading current sound or the burning smell, if yes, change the motor
by the new one. Check if the control board has the burning smell, if yes, change the control
board by the new one. Check if the voltage is normal or too low, do re-testing by the correct
voltage.
6. E06 —Motor Wire and Control Board wire connection failure:
The probable reason is that the Motor Wire and Control Board wire is not connected well or
the DC motor is open circuit.
7. If the motor doesn’t rotate after pressing the START button, check if the motor wires are
broken, the fuses of the bottom control board are damaged or come off, the motor wires are
connected well, and the IGBT of the bottom control board is burnt. Check if all the motor wires
are connected well, the fuses of the control board are okay, if not, re-assemble it or change
the part with the new one. Check if the motor is getting loose, and connect the motor wires
well. Use the Multi-meter to test if the IGBT of the bottom control board is burnt out, change
either the IGBT or the whole bottom control board.
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS
General Conditions of Warranty and Definition of Terms
All Warranty Conditions stated hereunder determine Warranty Coverage and Warranty Claim
Procedure. Conditions of Warranty and Warranty Claims are governed by Act No. 40/1964 Coll. Civil
Code, Act No. 513/1991 Coll., Commercial Code, and Act No. 634/1992 Coll., Consumer Protection
Act, as amended, also in cases that are not specified by these Warranty rules.
The seller is SEVEN SPORT s.r.o. with its registered office in Borivojova Street 35/878, Prague
13000, Company Registration Number: 26847264, registered in the Trade Register at Regional Court
in Prague, Section C, Insert No. 116888.
According to valid legal regulations it depends whether the Buyer is the End Customer or not.
“The Buyer who is the End Customer” or simply the “End Customer” is the legal entity that does not
conclude and execute the Contract in order to run or promote his own trade or business activities.
“The Buyer who is not the End Customer” is a Businessman that buys Goods or uses services for the
purpose of using the Goods or services for his own business activities. The Buyer conforms to the
General Purchase Agreement and business conditions to the extent specified in the Commercial
Code.
These Conditions of Warranty and Warranty Claims are an integral part of every Purchase Agreement
made between the Seller and the Buyer. All Warranty Conditions are valid and binding, unless
otherwise specified in the Purchase Agreement, in the Amendment to this Contract or in another
written agreement.
Warranty Conditions
Warranty Period
The Seller provides the Buyer a 24 months Warranty for Goods Quality, unless otherwise specified in
the Certificate of Warranty, Invoice, Bill of Delivery or other documents related to the Goods. The legal
warranty period provided to the Consumer is not affected.