Pro-Elec PELL0085 User manual
1
Magnier Lamp
Model PELL0085 and PELL0086
2
Please read these inructions carefully before arting inallation and retain for
future reference.
IMPORTANT SAFETY INFORMATION
• Model PELL0085 should be clamped securely to the edge of a table or desk.
• Model PELL0086 should be placed on a at level surface
• Connect the plug to the mains supply and switch on the power.
• Turn the lamp on using the switch on the top of the lamp surround (PELL0085) or
on the base (PELL0086).
• Adju the position and angle of the lamp as required.
INSTALLATION
• Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the appliance to the mains power supply.
• This product contains glass, care mu be taken when assembling or handling to
prevent injury or damage to the product.
• Close the lens cover when not in use and keep away from direct sunlight to prevent
possible magnication of sunlight and the risk of causing a re.
• This product is for indoor use only.
CLEANING AND MAINTENANCE
SPECIFICATIONS
PELL0085 PELL0086
Input voltage: 220-240V~50Hz 220-240V~50Hz
Rated power: 15W 10W
Mounting: Table clamp Table base
Lamps: LEDs x 80 pcs LEDs x 15 pcs
Lumens: 967lm 560lm
Colour temp: 6500K 6500K
• Clean the product with a soft, dry cloth only. Do not use any solvents or abrasive
chemical cleaners.
• The LED’s in these products are non-replaceable.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Contact your local authority for details of recycling schemes in
your area. Made in China
PR2 9PP
PO Box 13362 Dublin 2
Man Rev 1.1
This manual suits for next models
1
Table of contents
