Pro-Form PETL14809.0 User manual

Serial Number
Decal
Model No. PETL14809.0
Serial No.
CAUT ON
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
QUEST ONS?
If you have questions, or if there
are missing parts, please contact
us:
Call: 08457 089 009
From reland: 053 92 36102
E-mail: www.iconsupport.eu
Write:
CON Health & Fitness, Ltd.
c/o H Group PLC, Express Way
Whitwood, West Yorkshire
WF10 5QJ
UK
n Australia:
Please contact the store where
you purchased this product.
Write the serial number in the space
above for reference. USER'S MANUAL
With Universal Dock for iPod®
www.iconeurope.com

TABLE OF CONTENTS
WARNINGDECALPLACEMENT..............................................................2
IMPORTANTPRECAUTIONS ................................................................3
BEFOREYOUBEGIN ......................................................................5
ASSEMBLY...............................................................................6
HOWTOUSETHECHESTPULSESENSOR...................................................12
OPERATIONANDAD USTMENT ............................................................13
HOWTOFOLDANDMOVETHETREADMILL ..................................................24
TROUBLESHOOTING .....................................................................26
EXERCISEGUIDELINES ...................................................................29
PARTLIST ..............................................................................30
EXPLODEDDRAWING ....................................................................32
ORDERINGREPLACEMENTPARTS ..................................................BackCover
RECYCLINGINFORMATION.........................................................BackCover
2
PROFORM is a registered trademark of ICON IP, Inc.
iPod®is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
This drawing shows the locations of the
warning decals. f a decal is missing or
illegible, see the front cover of this
manual and request a free replacement
decal. Apply the decal in the location
shown. Note: The decals may not be
shown at actual size.
WARN NG DECAL PLACEMENT
(Australia and
New Zealand only)

3
1. Before beginning any exercise program, con-
sult your physician. This is especially impor-
tant for persons over age 35 or persons with
pre-existing health problems.
2. t is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
3. Use the treadmill only as described.
4. Place the treadmill on a level surface, with at
least 8 ft. (2.4 m) of clearance behind it and 2
ft. (0.6 m) on each side. Do not place the
treadmill on any surface that blocks air open-
ings. To protect the floor or carpet from dam-
age, place a mat under the treadmill.
5. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
7. Keep children under age 12 and pets away
from the treadmill at all times.
8. The treadmill should be used only by per-
sons weighing 300 lbs. (136 kg) or less.
9. Never allow more than one person on the
treadmill at a time.
10. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose
clothes that could become caught in the
treadmill. Athletic support clothes are recom-
mended for both men and women. Always
wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.
11. When connecting the power cord (see page
13), plug the power cord into an earthed cir-
cuit. No other appliance should be on the
same circuit. When replacing the fuse, an
ASTA approved BS1362 type should be fitted
to the fuse carrier. A 13 amp fuse should be
used.
12. f an extension cord is needed, use only a 3-
conductor, 14-gauge (1 mm2) cord that is no
longer than 5 ft. (1.5 m).
13. Keep the power cord away from heated sur-
faces.
14. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROU-
BLESHOOT NG on page 26 if the treadmill is
not working properly.)
15. Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 15).
16. Never start the treadmill while you are stand-
ing on the walking belt. Always hold the
handrails while using the treadmill.
17. The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.
18. The pulse sensor is not a medical device.
Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
WARN NG: To reduce the risk of serious injury, read all important precautions and in-
structions in this manual and all warnings on your treadmill before using your treadmill. CON as-
sumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
MPORTANT PRECAUT ONS

4
19. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and switch the reset/off cir-
cuit breaker to the off position when the
treadmill is not in use. (See the drawing on
page 5 for the location of the circuit breaker.)
20. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADM LL on page 24.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.
21. When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
22. Never insert any object into any opening on
the treadmill.
23. nspect and properly tighten all parts of the
treadmill regularly.
24. DANGER: Always unplug the power
cord immediately after use, before cleaning the
treadmill, and before performing the mainte-
nance and adjustment procedures described in
this manual. Never remove the motor hood un-
less instructed to do so by an authorized ser-
vice representative. Servicing other than the
procedures in this manual should be performed
by an authorized service representative only.
25. This treadmill is intended for in-home use
only. Do not use this treadmill in a commer-
cial, rental, or institutional setting.
26. Over exercising may result in serious injury
or death. f you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
SAVE THESE NSTRUCT ONS

5
Thank you for selecting the revolutionary PROFORM®
1290 ZLT treadmill with Universal Dock for iPod®. The
1290 ZLT treadmill with Universal Dock for iPod offers
a selection of features designed to make your work-
outs at home more enjoyable and effective. And when
youʼre not exercising, the unique treadmill can be
folded up, requiring less than half the floor space of
other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
ing this manual, please see the front cover of this man-
ual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
BEFORE YOU BEG N
Handrail
Upright
Accessory Tray
Key/Clip
Reset/Off
Circuit
Breaker
Walking Belt
Platform Cushion
Foot Rail
Idler Roller
Adjustment Bolts
Console
Pulse Sensor

6
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of
the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri-
cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys and your own Phillips screwdriver ,
adjustable wrench , needlenose pliers , and rubber mallet .
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: f a part is not in the hardware kit, check to see if it is preattached
to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem-
bly. Extra hardware may be included.
3/8" Nut (8)–3
Base Foot
Spacer (13)–2
3/8" Star
Washer (9)–4
5/16" Star
Washer (10)–6
#8 x 1" Tek Screw (2)–4
3/8" x 4 1/2" Bolt (6)–4
5/16" x 1" Bolt (7)–6
1/4" x 3/4" Bolt (5)–4
3/8" x 2" Bolt (4)–3
Bolt Spacer (80)–4

7
3. Attach a Wheel (84) with the 3/8" x 2" Bolt (4)
and the 3/8" Nut (8) that you removed in step 1.
Do not overtighten the Nut; the Wheel must
turn freely.
4
8
3
84
2. With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (56) so that the treadmill is more stable;
do not fully fold the Frame yet.
Remove and discard the two indicated bolts (B)
and the shipping bracket (C).
Cut the shipping tie securing the Upright Wire
(38) to the Base (83). Locate a tie in the indi-
cated hole in the Base, and use the tie to pull
the Upright Wire out of the hole.
Attach a Base Foot (81) to the Base (83) in the
location shown with a #8 x 1" Tek Screw (2) and
a Base Foot Spacer (13). Then, attach another
Base Foot (81) with only a #8 x 1" Tek Screw (2).
83
2
56
81
2
81 2
38
Hole
B
C
13
1. Make sure that the power cord is unplugged.
Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4),
and the shipping bracket (A) from the Base (83).
Repeat this step on the other side of the
treadmill. Discard the shipping brackets. The
Bolts and Nuts will be used in steps 3 and 6.
83
4
A
8
1

8
6. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (56) so the treadmill is more stable; do
not fully fold the Frame yet.
Remove and discard the two indicated bolts (B)
and the shipping bracket (C).
Attach a Base Foot (81) to the Base (83) in the
location shown with a #8 x 1" Tek Screw (2) and
a Base Foot Spacer (13). Then, attach another
Base Foot (81) with only a #8 x 1" Tek Screw (2).
Attach a Wheel (84) with the 3/8" x 2" Bolt (4)
and the 3/8" Nut (8) that you removed in step 1.
Do not overtighten the Nut; the Wheel must
turn freely.
6
83
84
56
4
8
81
2
B
C
81
13
2
5. Hold a Bolt Spacer (80) inside the lower end of
the Right Upright (78). Insert a 3/8" x 4 1/2" Bolt
(6) with a 3/8" Star Washer (9) into the Right
Upright and the Bolt Spacer. Repeat this step
with a second Bolt Spacer (80), 3/8" x 4 1/2"
Bolt (6), and 3/8" Star Washer (9). Then, set
the Right Upright in the Right Upright Spacer
(79). Be careful not to pinch the Upright Wire
(38).
Partially tighten the 3/8" x 4 1/2" Bolts (6); do
not fully tighten the Bolts yet.
79
78
80
6
5
38
9
4. Identify the Right Upright (78) and the Right
Upright Spacer (79), which are marked with
“Right” stickers.
Insert the Upright Wire (38) through the Right
Upright Spacer (79) as shown. Set the Right
Upright Spacer on the Base (83). Be careful
not to pinch the Upright Wire.
Have a second person hold the Right Upright
(78) near the Base (83). See the inset drawing.
Tie the long tie in the Right Upright securely
around the end of the Upright Wire (38). Then,
pull the other end of the long tie until the Upright
Wire is routed completely through the Right
Upright.
83
38
78
79
38
4
Long
Tie
Long Tie
78
38

9
8. Remove the plastic ties from the handrail as-
sembly. If necessary, press the 5/16" Cage Nuts
(33) into place.
Have a second person hold the handrail assem-
bly near the Uprights (74, 78). Connect the
Upright Wire (38) to the console wire. See the
inset drawing. The connectors should slide
together easily and snap into place. If they do
not, turn one connector and try again. F THE
CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER S TURNED ON.
Remove the wire tie from the Upright Wire (38).
78
74
Console
Wire
Wire Tie
8
Handrail
Assembly
38
7. Set the Left Upright Spacer (76) on the Base
(83). Hold a Bolt Spacer (80) inside the lower
end of the Left Upright (74). Insert a 3/8" x 4
1/2" Bolt (6) with a 3/8" Star Washer (9) into the
Left Upright and the Bolt Spacer. Repeat this
step with a second Bolt Spacer (80), 3/8" x 4
1/2" Bolt (6), and 3/8" Star Washer (9). Then,
set the Left Upright in the Left Upright Spacer.
Partially tighten the 3/8" x 4 1/2" Bolts (6); do
not fully tighten the Bolts yet.
With the help of a second person, tip the tread-
mill so that the Base (83) is flat on the floor.
76
74
6
83
80
7
9
Plastic
Tie
Plastic
Tie
33
33
38
Console
Wire

10
9. Set the handrail assembly on the Uprights (74,
78). Be careful not to pinch the wires.
Attach the handrail assembly to the Uprights
(74, 78) with six 5/16" x 1" Bolts (7) and six
5/16" Star Washers (10) as shown.
See assembly steps 5 and 7. Firmly tighten
the 3/8" x 4 1/2" Bolts (6).
710
74
Handrail
Assembly
9
10. Have a second person hold the console assem-
bly near the handrail assembly. Connect the two
wires from the console assembly to the two
wires from the handrail assembly. See the inset
drawing in step 8. The connectors should
slide together easily and snap into place. If
they do not, turn one connector and try again. F
THE CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER S TURNED ON.
Handrail
Assembly
Console
Assembly
10
78
7
7
7
10
10
10
Wires
Wires

11
13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear
plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread-
mill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex
keys is used to adjust the walking belt (see pages 27 and 28).
12. Plug in the power cord (see page 13) and insert
the key into the console. Press the Incline de-
crease button on the console until the incline
reaches the minimum incline level. Remove the
key and unplug the power cord.
Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (53) so that the large
barrel and the Latch Knob (54) are in the posi-
tions shown.
Attach the Latch Bracket (14) and Storage Latch
(53) to the Base (83) with two 3/8" x 2" Bolts (4)
and two 3/8" Nuts (8).
Attach the upper end of the Storage Latch (53)
to the bracket on the Frame (56) with a 3/8" x 2"
Bolt (4) and a 3/8" Nut (8). Note: It may be nec-
essary to move the Frame back and forth to
align the Storage Latch with the bracket.
Lower the Frame (56) (see HOW TO LOWER
THE TREADMILL FOR USE on page 25).
53
8
8
Large
Barrel
83
14
4
56
12
4
54
11. Insert the wires from the console assembly into
the handrail assembly.
Attach the console assembly to the handrail as-
sembly with four 1/4" x 3/4" Bolts (5). Be careful
not to pinch the wires.
Console
Assembly
5
5
Wires
Handrail
Assembly
11

12
HOW TO PUT ON THE CHEST PULSE SENSOR
The chest pulse sensor consists of two components:
the chest strap and the sensor unit. Insert the tab on
one end of the chest strap into the hole in one end of
the sensor unit, as shown in the inset drawing. Press
the end of the sensor unit under the buckle on the
chest strap. The tab should be flush with the front of
the sensor unit.
Next, wrap the chest
pulse sensor around
your chest and attach
the other end of the
chest strap to the
sensor unit. Adjust
the length of the
chest strap, if neces-
sary. The chest pulse sensor should be under your
clothes, tight against your skin, and as high under the
pectoral muscles or breasts as is comfortable. Make
sure that the logo on the sensor unit is facing forward
and is right-side-up.
Next, pull the sensor unit away from your body a few
inches and locate the two electrode areas on the inner
side (the electrode areas are covered by shallow
ridges). Using saline solution such as saliva or contact
lens solution, wet both electrode areas. Return the
sensor unit to a position against your chest.
CARE AND MA NTENANCE
• Thoroughly dry the chest pulse sensor after each
use. The chest pulse sensor is activated when the
electrode areas are wetted and the chest pulse sen-
sor is put on; the chest pulse sensor shuts off when
it is removed and the electrode areas are dried. If
the chest pulse sensor is not dried after each use, it
may remain activated longer than necessary, drain-
ing the battery prematurely.
• Store the chest pulse sensor in a warm, dry place.
Do not store the chest pulse sensor in a plastic bag
or other container that may trap moisture.
• Do not expose the chest pulse sensor to direct sun-
light for extended periods of time; do not expose it to
temperatures above 120° F (50° C) or below 15° F
(-10° C).
• Do not excessively bend or stretch the sensor unit
when using or storing the chest pulse sensor.
• Clean the sensor unit using a damp cloth—never
use alcohol, abrasives, or chemicals. The chest
strap may be hand washed and air dried.
TROUBLESHOOT NG
The instructions on the following pages explain
how the chest pulse sensor is used with the con-
sole. f the chest pulse sensor does not function
properly, try the steps below.
• Make sure that you are wearing the chest pulse sen-
sor as described at the left. Note: If the chest pulse
sensor does not function when positioned as de-
scribed, move it slightly lower or higher on your
chest.
• Use saline solution such as saliva or contact lens
solution to wet the two electrode areas on the sen-
sor unit. If heart rate readings do not appear until
you begin perspiring, rewet the electrode areas.
• As you walk or run on the treadmill, position your-
self near the center of the walking belt. For the con-
sole to display heart rate readings, the user must
be within armʼs length of the console.
• The chest pulse sensor is designed to work with
people who have normal heart rhythms. Heart rate
reading problems may be caused by medical condi-
tions such as premature ventricular contractions
(pvcs), tachycardia bursts, and arrhythmia.
• The operation of the chest pulse sensor can be af-
fected by magnetic interference caused by high
power lines or other sources. If it is suspected that
this is a problem, try relocating the treadmill.
Chest Strap
Tabs
Sensor Unit
Tab
Sensor
Unit Buckle
HOW TO USE THE CHEST PULSE SENSOR

13
OPERAT ON AND ADJUSTMENT
DANGER: mproper connection of the equip-
ment-earthing conductor can result in an increased risk of
electric shock. Check with a qualified electrician or service-
man if you are in doubt as to whether the product is prop-
erly earthed. Do not modify the plug provided with the
product—if it will not fit the outlet, have a proper outlet in-
stalled by a qualified electrician.
THE PRE-LUBR CATED WALK NG BELT
Your treadmill features a walking belt coated with high-performance lubricant. MPORTANT: Never apply sili-
cone spray or other substances to the walking belt or the walking platform. Such substances will deterio-
rate the walking belt and cause excessive wear.
HOW TO PLUG N THE POWER CORD
This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric cur-
rent to reduce the risk of electric shock. This product is equipped
with a power cord having an equipment-earthing conductor and an
earthing plug. MPORTANT: f the power cord is damaged, it
must be replaced with a manufacturer-recommended power
cord.
See drawing 1. Plug the indicated end of the power cord into the
socket on the treadmill.
HOW TO PLUG IN THE POWER CORD IN AUSTRALIA
See drawing 2. Plug the power cord into an appropriate outlet that
is properly installed and earthed in accordance with all local codes
and ordinances. MPORTANT: The treadmill is not compatible
with RCD-equipped outlets.
HOW TO PLUG IN THE POWER CORD IN THE UK
See drawing 3. Press the pins on the power cord into the metal clips
in the adapter as shown. Close the adapter cover over the end of the
power cord and tighten the screw in the adapter. MPORTANT:
Make sure that the adapter cover is secure and the screw has
been tightened before using the power cord.
See drawing 4. Plug the power cord into an appropriate outlet that is
properly installed and earthed in accordance with all local codes and
ordinances. MPORTANT: The treadmill is not compatible with
RCD-equipped outlets.
Socket on Treadmill
Metal
Clips
1
3
Pins
Screw
Adapter
Outlet
4
Adapter
Cover
Outlet
2
Power Cord

14
FEATURES OF THE CONSOLE
The treadmill console offers an impressive array of
features designed to make your workouts more effec-
tive and enjoyable. When the manual mode of the con-
sole is selected, the speed and incline of the treadmill
can be changed with the touch of a button. As you exer-
cise, the console will display continuous exercise feed-
back. You can even measure your heart rate using the
handgrip pulse sensor or the chest pulse sensor (see
page 12 for information on the chest pulse sensor).
In addition, the console features twelve preset work-
outs—six performance workouts, and six weight loss
workouts. Each workout automatically controls the
speed and incline of the treadmill as it guides you
through an effective exercise session. The console
also offers two heart rate workouts that control the
speed and incline of the treadmill to help you keep your
heart rate near target heart rate settings. You can even
create your own custom workouts.
The console also features the new iFit interactive
workout system. The iFit system enables the console
to accept iFit interactive workout cards containing
workouts designed to help you achieve specific fitness
goals. For example, lose unwanted pounds with the 8-
week Weight Loss workout, or train for a long-distance
run with the Marathon workout. iFit workouts automati-
cally control the treadmill while the voice of a personal
trainer coaches you through every step of your work-
out. iFit cards are available separately. To purchase
iFit cards at any time, call the telephone number
on the front cover of this manual or go to
www.iFit.com. iFit cards are also available at select
stores.
You can even listen to your favorite workout music or
audio books with the consoleʼs sound system while
you exercise. This product has been designed specifi-
cally to work with iPod and has been certified by the
developer to meet Apple performance standards.
To turn on the power, see page 15. To use the man-
ual mode, see page 15. To use a performance work-
out, see page 17. To use a heart rate workout, see
page 18. To use the weight loss workouts center,
see page 19. To use the custom workouts center,
see page 20. To use an iFit card, see page 21. To
use the information mode, see page 22. To use the
sound system, see page 23.
CONSOLE D AGRAM

15
HOW TO TURN ON THE POWER
MPORTANT: f the treadmill has been exposed to
cold temperatures, allow it to warm to room tem-
perature before turning on the power. f you do not
do this, you may damage the console displays or
other electrical components.
Plug in the power cord (see
page 13). Next, locate the
reset/off circuit breaker on
the treadmill frame near the
power cord. Make sure that
the circuit breaker is in the
“reset” position.
MPORTANT: The console features a display demo
mode, designed to be used if the treadmill is dis-
played in a store. f the displays light as soon as
you plug in the power cord and switch the reset/off
circuit breaker to the reset position, the demo
mode is turned on. To turn off the demo mode,
hold down the Stop button for a few seconds. f the
displays remain lit, see THE NFORMAT ON MODE
on page 22 to turn off the demo mode.
Next, stand on the foot rails
of the treadmill. Locate the
clip attached to the key
(see the drawing at the
right), and slide the clip se-
curely onto the waistband
of your clothes. Then, insert
the key into the console.
After a moment, the displays will light. MPORTANT:
n an emergency situation, the key can be pulled
from the console, causing the walking belt to slow
to a stop. Test the clip by carefully taking a few
steps backward; if the key is not pulled from the
console, adjust the position of the clip.
Note: The console can display speed and distance in
either kilometers or miles. To find which unit of mea-
surement is selected or to change the unit of measure-
ment, see THE INFORMATION MODE on page 22.
For simplicity, all instructions in this manual refer
to kilometers.
MPORTANT: f there is a sheet of clear plastic on
the console, remove the plastic. To prevent dam-
age to the walking platform, wear clean athletic
shoes while using the treadmill. The first time the
treadmill is used, observe the alignment of the
walking belt, and center the walking belt if neces-
sary (see page 28).
HOW TO USE THE MANUAL MODE
1. nsert the key into the console.
See HOW TO TURN ON THE POWER at the left.
2. Select the manual mode.
Each time the key is inserted, the manual mode
will be selected. If you have selected a workout,
press the Performance Workouts button repeatedly
until only zeros appear in the displays.
3. Start the walking belt and adjust the speed.
To start the walking belt, press the Start button, the
Speed increase button, or one of the numbered 1
Step Speed buttons.
If you press the Start button or the Speed increase
button, the walking belt will begin to move at 2
Km/H. As you exercise, change the speed of the
walking belt as desired by pressing the Speed in-
crease and decrease buttons near the Start button.
Each time you press one of the buttons, the speed
setting will change by 0.1 Km/H; if you hold down
the button, the speed setting will change in incre-
ments of 0.5 Km/H. If you press one of the num-
bered 1 Step Speed buttons, the walking belt will
gradually increase in speed until it reaches the se-
lected speed setting.
To stop the walking belt, press the Stop button. To
restart the walking belt, press the Start button, the
Speed increase button, or one of the numbered 1
Step Speed buttons.
4. Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the
Incline increase and decrease buttons or one of the
numbered 1 Step Incline buttons. Each time you
press one of the buttons, the incline will gradually
change until it reaches the selected incline setting.
Reset
Key
Clip

16
5. Monitor your progress with the displays.
The matrix—When you
select the manual mode,
the matrix will display a
400 meter (1/4-mile)
track. As you exercise,
the indicators around
the track will light in suc-
cession until the entire track is lit. The track will
then darken and the indicators will again begin to
light in succession.
The Time display—The
Time display will show
the elapsed time. Note:
When a workout is se-
lected, the display will
show the time remaining
in the workout instead of the elapsed time.
The Distance display—
The Distance display
can show the distance
that you have walked or
run.
The Weight Loss
Workouts Center dis-
play—The Weight Loss
Workouts Center display
can show the approxi-
mate number of calories
you have burned, the incline of the treadmill, your
heart rate, and your weight.
The Custom Workouts
Center display—The
Custom Workouts
Center display will show
the speed of the walking
belt. When you use the
Custom Workouts Center, the display will also
show the number, duration, minimum speed set-
ting, and maximum speed setting of the workout.
As you exercise, the workout intensity level bar will
indicate the approximate intensity level of your ex-
ercise.
To reset the displays, press the Stop button, re-
move the key, and then reinsert the key.
6. Measure your heart rate if desired.
Note: f you use the handgrip pulse sensor and
the chest pulse sensor at the same time, the
console will not display your heart rate accu-
rately. See page 12 for information on the chest
pulse sensor.
Before using
the handgrip
pulse sensor,
remove the
sheets of clear
plastic from
the metal con-
tacts. In addi-
tion, make
sure that your hands are clean.
To measure your heart rate, stand on the foot
rails and hold the metal contacts on the handrail—
avoid moving your hands. Hold the contacts for
approximately ten seconds. When your pulse is de-
tected, your heart rate will be shown. For the most
accurate heart rate reading, continue to hold
the contacts for about 15 seconds.
7. When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to the lowest
setting. The incline must be at the lowest set-
ting when you fold the treadmill to the storage
position, or you may damage the treadmill.
Next, remove the key from the console and put it in
a secure place.
When you are finished using the treadmill, switch
the reset/off circuit breaker to the “off” position and
unplug the power cord. MPORTANT: f you do
not do this, the treadmillʼs electrical compo-
nents may wear prematurely.
Contacts

17
HOW TO USE A PERFORMANCE WORKOUT
1. nsert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
2. Select a performance workout.
To select a performance
workout, press the
Performance Workouts
button repeatedly until
the number of the de-
sired workout appears
in the display.
When you select a performance workout, the dis-
play will show the name, duration, maximum speed
setting, and maximum incline setting of the work-
out. In addition, a profile of the speed settings of
the workout will scroll across the matrix.
Each performance workout is divided into one-
minute segments. One speed setting and one in-
cline setting are programmed for each segment.
Note: The same speed and/or incline setting may
be programmed for consecutive segments.
3. Start the workout.
Press the Start button or the Speed increase but-
ton to start the workout. A moment after you press
the button, the treadmill will automatically adjust to
the first speed and incline settings of the workout.
Hold the handrails and begin walking.
During the workout, the
profile will show your
progress. The flashing
segment of the profile
represents the current
segment of the workout.
The height of the flash-
ing segment indicates the speed setting for the cur-
rent segment. At the end of each segment, a series
of tones will sound and the next segment of the
profile will begin to flash. If a new speed and/or in-
cline setting is programmed for the next segment,
the new speed and/or incline settings will flash in
the displays for a few seconds and the treadmill
will automatically adjust to the new speed and in-
cline settings.
The workout will continue in this way until the last
segment of the profile flashes in the display and
the last segment ends. The walking belt will then
slow to a stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the Speed or
Incline buttons; however, when the next segment
of the workout begins, the treadmill will auto-
matically adjust to the speed and incline set-
tings for the next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 2 Km/H. When the next seg-
ment of the workout begins, the treadmill will auto-
matically adjust to the speed and incline settings
for the next segment.
4. Monitor your progress with the displays.
See step 5 on page 16.
5. Measure your heart rate if desired.
See step 6 on page 16.
6. When you are finished exercising, remove the
key from the console.
See step 7 on page 16.
Current Segment

18
HOW TO USE A HEART RATE WORKOUT
1. Put on the chest pulse sensor.
For best results, wear a chest pulse sensor to use
a heart rate workout. See page 12 for information
about the chest pulse sensor.
2. nsert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
3. Select a heart rate workout.
To select one of the two
heart rate workouts,
press the Heart Rate
Workouts button repeat-
edly. When a heart rate
workout is selected, the
workout duration, workout name, and maximum
target heart rate will appear in the displays. In addi-
tion, a profile of the heart rate settings of the work-
out will scroll across the matrix.
4. Enter a target heart rate setting.
The maximum target heart rate setting of the work-
out will appear in the Weight Loss Workouts
Center display. If desired, press the Vol./HR in-
crease and decrease buttons to change the maxi-
mum target heart rate setting (see EXERC SE N-
TENS TY on page 29). Note: If you change the
maximum target heart rate setting, the intensity
level of the entire workout will change.
5. Start the workout.
Press the Start button or the Speed increase but-
ton to start the workout. A moment after you press
the button, the treadmill will automatically adjust to
the first speed and incline settings of the workout.
Hold the handrails and begin walking.
Heart rate workouts are divided into one-minute
segments. One target heart rate setting is pro-
grammed for each segment. Note: The same tar-
get heart rate setting may be programmed for con-
secutive segments.
During each segment of the workout, the console
will compare your heart rate to the target heart rate
setting for that segment. If your heart rate is too far
below or above the target heart rate setting, the
speed and/or incline will automatically increase or
decrease to bring your heart rate closer to the tar-
get heart rate setting.
If your pulse is not detected during the workout, the
speed and incline of the treadmill will not automati-
cally adjust. If this occurs, see page 12.
When the first segment of the workout ends, a se-
ries of tones will sound and all target heart rate set-
tings will move one column to the left. If a new
speed or incline setting is programmed for the next
segment, the new speed or incline setting will ap-
pear in the display. The workout will continue in
this way until the last segment of the workout ends.
The walking belt will then slow to a stop.
If the speed and/or incline settings are too high or
too low, you can change the intensity level of the
workout at any time by pressing the Speed and
Incline buttons; however, when the console com-
pares your heart rate to the target heart rate for
the current segment, the speed and/or incline
of the treadmill may change to bring your heart
rate closer to the target heart rate setting.
CAUT ON: f you have heart prob-
lems, or if you are over 60 years of age and
have been inactive, do not use the heart rate
workouts. f you are taking medication regu-
larly, consult your physician to find whether the
medication will affect your exercise heart rate.

19
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton. The walking belt will begin to move at 1 mph;
however, when the console compares your
heart rate to the target heart rate setting for the
current segment, the speed and/or incline of
the treadmill may change to bring your heart
rate closer to the target heart rate setting.
6. Follow your progress with the displays.
See step 5 on page 16.
7. When you are finished exercising, remove the
key from the console.
See step 7 on page 16.
HOW TO USE THE WE GHT LOSS WORKOUTS
CENTER
1. nsert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
2. Select a weight loss workout.
To select a weight loss workout, press the 250
Cals., 300 Cals., 350 Cals., 400 Cals., 500 Cals.,
or 600 Cals. button. When you select a weight loss
workout, the display will show the approximate
number of calories you will burn, and the duration
and maximum speed setting of the workout. In ad-
dition, a profile of the speed settings of the workout
will scroll across the matrix.
Next, the current weight setting will appear in the
display. If you have not entered your weight, press
the Set Weight increase and decrease buttons re-
peatedly to enter your weight. Press the Enter but-
ton below the Set Weight buttons. Note: Your
weight may be displayed in kilograms or pounds.
To find which unit of measurement is selected or to
change the unit of measurement, see THE INFOR-
MATION MODE on page 22.
Each weight loss workout is divided into segments.
One speed setting and one incline setting are pro-
grammed for each segment. Note: The same
speed and/or incline setting may be programmed
for consecutive segments.
3. Start the workout.
The weight loss workout will function in the same
way as a performance workout (see step 3 on
page 17).
4. Monitor your progress with the displays.
See step 5 on page 16.
The Weight Loss
Workouts Center display
will show the number of
calories remaining in the
workout.
5. Measure your heart rate if desired.
See step 6 on page 16.
6. When you are finished exercising, remove the
key from the console.
See step 7 on page 16.

20
HOW TO USE THE CUSTOM WORKOUTS CENTER
1. nsert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
2. Select the Custom Workouts Center.
To use a Custom Workouts Center, press the
Select Profile increase button.
Select the desired workout profile by pressing the
Select Profile increase and decrease buttons re-
peatedly. Then press the Enter button below the
Set Max. Speed buttons. Note: If you do not press
the Enter button, the display will advance to the
next selection in a few seconds.
Next, select your desired workout duration by
pressing the Set Time increase and decrease but-
tons repeatedly. Then press the Enter button.
Select your minimum workout speed by pressing
the Set Min. Speed increase and decrease buttons
repeatedly. Then press the Enter button.
Next, select your maximum workout speed by
pressing the Set Max. Speed increase and de-
crease buttons repeatedly. Then press the Enter
button.
Each custom workout is divided into segments.
One speed setting and one incline setting are pro-
grammed for each segment.
3. Start the workout.
Press the Start button to start the workout. A mo-
ment after you press the button, the walking belt
will begin to move. Hold the handrails and begin
walking.
During the workout, the profile will show your
progress. The flashing segment of the profile repre-
sents the current segment of the workout. The
height of the flashing
segment indicates the
speed setting for the cur-
rent segment. At the end
of each segment, a se-
ries of tones will sound
and the next segment of
the profile will begin to flash. The new speed and
incline settings will appear in the display for a few
seconds and the treadmill will automatically adjust
to the new speed and incline settings.
The workout will continue in this way until the last
segment of the profile flashes in the display and the
last segment ends. The walking belt will then slow
to a stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the Speed or
Incline buttons; however, when the next segment
of the workout begins, the treadmill will auto-
matically adjust to the speed and incline set-
tings for the next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 2 Km/H. When the next seg-
ment of the workout begins, the treadmill will auto-
matically adjust to the speed and incline settings
for the next segment.
4. Monitor your progress with the displays.
See step 5 on page 16.
5. Measure your heart rate if desired.
See step 6 on page 16.
6. When you are finished exercising, remove the
key from the console.
See step 7 on page 16.
Current Segment