PRO SIGNAL PSG3416 User manual

PSG3416
WIRELESS AUDIO SYSTEM
1

IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
• Check that the voltage indicated on the PSU rating plate is correct for the local mains
supply.
• Do not expose to excessive heat or locate where damp or moisture may enter the
device.
• Avoid to use in a overly complex 2.4GHz wireless environment.
OVERVIEW
• This device can transmit audio from an externally connected or wireless source to up
to 4 receivers over a distance of up to 30 meters.
WHAT’s IN THE BOX
FEATURES
• 1 transmitter and 1 receiver
• USB charger cable
• Instruction Manual.
Transmitter
Pairing LED
B/T wireless receiving LED

Receiver
INSTALLATION
NOTE: The receiver(s) must rst be fully charged before use for up to 1 hour and the PSU
connected to the transmitter USB power socket and switched on at the mains.
• Initially, powering the transmitter on switches into bluetooth discovery mode.
• On your source device (smartphone etc), search for ID: Music BT. No code is required
but if your device demands one, use “0000”.
• The source device is now connected and ready to play audio once the receiver(s)
have been paired.
• Press the pairing button on the transmitter. The transmitter LED stars to ash twice
per second.
• This indicates the device is waiting for a receiver to auto connect. Once pairing is
successful the LED will remain lit continuously.
• Within 10 seconds, press the pairing button on a receiver. The pairing LED on the
transmitter will become constantly lit to indicate pairing in progress.
• When successfully connected with the transmitter, the pairing LED on the receiver will
ash once every 2.5 seconds.
• In this state, audio from the transmitter can be streamed to the receiver.
• Repeat for any additional receivers. Transmitter can be paired with up to 4 receivers.
• Use a soft cloth to wipe off any dust. If the device is very dirty, use a damp cloth and
wipe dry.
• Do not use any chemicals, abrasives or solvents that could damage the casing.
MAINTENANCE

4
SPECIFICATIONS
Wireless audio
transmission quality:
44.1kHz CD quality with Texas Instruments PPWTM
point-to-point connection technology
Wireless distance: up to 30 meters open site. Avoid to use in a overly complex
2.4GHz wireless environment.
Wireless version: v4.2 with Qualcomm aptX, distance over 10 meters.
Power input (5VDC): Power jack or 2-pin screw terminal.
Number of devices: 1 transmitter can pair with up to 4 receivers.
Receiver charging time: 1 hour charging run for 8 hours.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in Taiwan. PR2 9PP
Man Rev 1.0