PROAIM CINEMA P-BMLS-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Boom Light Telescopic Stand w 5/8" Mount (P-BMLS-01)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assembly Manua l
Proaim Boom Light Telescopic Stand

2
 Loosen the knob of the boom light telescopic
stand and spread its legs as per your
requirements, as shown in the image.
 Loosen the center knob of the boom light
telescopic stand and open the boom arm
according to your requirement.
Boom Light Telescopic Stand Setup
 Loosen the knob on the 1st secon of the
telescopic boom arm, extending its length.
 Similarly, you can extend the length by
loosening the 2nd and 3rd knob.
Note: Boom arm features three secons that
telescope from 8 to 3.4, secured &
ghtened by locking knobs.
 Secure the legs properly with the knob.
Note: The sturdy stand has two legs in the
front & a central column post, and all of them
are equipped with quick levelling knobs to
stand at uneven stairs, hills, and curbs.
 Secure the Boom arm properly with the knob
as shown in the picture.

3
YOUR PROAIM BOOM LIGHT TELESCOPIC STAND W 5/8" MOUNT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
 Mount the lights to 5/8" baby pin mounng
on the telescopic boom arm and secure the
knob properly.
Note: The top of the boom arm is equipped
with a 5/8" baby pin to facilitate overhead
lighng, microphone posioning, reectors, so
boxes, etc.
Note: A baby pin at the top of the central post
allows you to mount various accessories for
studio and locaon shoots.
 Loosen the boom knob of the boom light
telescopic stand and extend the levelling feet
as shown in the image.
Note: This way, it is stable and safe to level the
feet on the surface.
 Your setup is ready to use.

4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of
me, we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor
does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to in-
specon and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling
in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our com-
pany.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.