PROART PROART A 543 User manual
PROART®
AUDIO MATRIX
MIXERS
PRODUCT GUIDE
A 5430 4X4 AUDIO MATRIX MIXER
Product Overview
The Proart®4 zone matrix provides a versatile and easy to use
system capable of delivering up to six audio inputs to four audio
zones. With four aux inputs, two mic inputs, paging, VOX muting
and wallplate control this system is suitable for both commercial and
domestic installations.
Any of the four auxiliary input sources may be selected to any zone
or multiple zones. Each zone has adjustments for volume, treble,
bass and source selection. A LED meter provides indication for each
of these settings.
The system includes two microphone inputs. Each input has a
6.35mm socket on the front panel, and a 3 pin Euroblock on the
rear panel. Microphone 1 may be set to automatically VOX mute all
auxiliary input sources when used. Either microphone operates on
an all call basis, however paging can be inhibited to individual zones
by selecting the mic on/off button for that zone. The Euroblock mic
inputs can be configured for either mic or line operation, with
selectable phantom power.
The system can be controlled via the included remote control or RS-
232 (for third party control systems).
An external mute is provided allowing a closing set of contacts to
mute all auxiliary input sources.
Distributed in Australia by Altronic Distributors Pty. Ltd. Ph: 1300 780 999 Fax: 1300 790 999 Internet: www.altronics.com.au
1
Key Features
• Any combination of inputs to any output
• Separate bass and treble controls for all inputs
• 2 mic inputs
• Rear inputs mic/line selectable
• Phantom power for rear mic inputs
• Switch selectable on/off mic muting
• Adjustable mic muting level
• Separate rear mounted switch contact for mute control
• Separate mic on/ off switches for each zone
• LED meters for volume bass and treble & source selection
• RS232 control
• Infra red remote control (supplied with main unit)
• 19” rack mount
• Optional A 5432 zone wallplates with easy Cat 5e wiring.
Specifications
Output: ............................................................................................................>6V at 10K Ohms.
Frequency Response: ......................................................................+0/-0.5 dB 10 Hz to 50 KHz
THD: ................................................................................................< 0.001% at (20 to 20 KHz)
Hum & Noise:.............................................................................................................. < -110 dB
Crosstalk: ..........................................................................................................> 50 dB At 1KHz
Input Impedance: ......................................................................................20K Ohms (balanced)
..............................................................................................................47K Ohms (unbalanced)
Voltage Gain: ..........................................................................................Line 10 dB. Mic 50dB.
Power Requirements: ......................................................................20VA 90-240V AC 50/60 Hz
Dimensions: ................................................................44H x 200D x 420Wmm (482W w/ears)
CONNECTORS
Front panel ............................................................................Mic 1, Mic 2 6.35mm TRS sockets
Rear panel ....................................................................Mute: 2 way pluggable screw terminals
................................................................................Mic 1, 2: 3 way pluggable screw terminals
..............................................................................................Source inputs: Stereo RCA sockets
..............................................................................................Zone outputs: Stereo RCA sockets
....................................................................................Remote wall plates: RJ45 cat 5e sockets
......................................................................................................................RS-232: DE9 female
PRODUCT GUIDE / PROART® AUDIO MATRIX MIXERS 2
Rear Panel
1: 240V AC input
2. Fuse
3. RS232 DE9 female
4. RJ45 wallplate connections (zones 1 - 4)
5. RCA outputs (zones 1 - 4)
6. RCA source inputs (source 1 - 4)
7. Mic./line phantom power switch (mic 2)
8. Mic. 2/line 2
9. Mic./line phantom power switch (mic 1)
10. Mic. 1/line 1
11. Mic. 1 mute level
12. External mute
Optional Add-Ons
A 5432 Zone Wallplate:
Installed in each zone, this optional wallplate enables selection
of input source, volume setting and mute function. A local
3.5mm jack input is provided for connection to iPod®or similar.
This input automatically mutes signals from the A 5430 unit.
Each wallplate is fitted with a backlit LCD indicating volume
level and a user set source name (from a preprogrammed
library). Connection to the main unit is via Cat 5e cabling with
RJ45 terminations. For an additional input, each wallplate may
be daisy-chained to a stereo RCA wallplate using the A 5038
cable.
Matrix allows any
input to any output
or combination of
outputs.
A 5430
4
3
2
1
MIC 1
MIC 2
1
2
3
4
Auxiliary level
stereo source
inputs
Microphone
inputs
4
3
2
1
Third party
control
External mute
(mutes inputs 1-4)
Additional A 5432
plates can be
used in the same
zone. These are
“daisy chained”.
Max 2 plates per
zone. Please
ensure plates on
the same zone
are programmed
identically.
Stereo
outputs
PA switches
(inhibits paging to that zone)
4 in / 4 out matrix
Matrix
RS232
Local source
input mutes
inputs 1-4
A 5342 Optional
remote source/volume
selection plate.
Cat 5e cable (max 300m)
Serial data cable
2 core shielded cable
2 x Shielded audio cable
123 4 9768
51011 12
Connection Diagram
Distributed in Australia by Altronic Distributors Pty. Ltd. Ph: 1300 780 999 Fax: 1300 790 999 Internet: www.altronics.com.au
© 2010 Altronic Distributors Pty. Ltd. Specifications subject to change without notice. E&OE.
Revision Date: 12/05/2010
A 5038 Additional wallplate source lead:
5 metre lead for connecting A 5432 wallplate to an RCA stereo
input wallplate such as P 6819 Clipsal®wallplate (pictured) or
P 6820A HPM®wallplate.
A 5038 P 6819
A 5432
