PROformance Hoops CV Series User manual
:0&9
:0&9
:0&9
:DOO0RXQW&96HULHV
Theinstructions,illustrationsandspecificationsinthismanualarebasedonthelatestinformationavailableat
thetimeofpublication.Yourbasketballgoalmayhaveproductimprovementsandoptionsnotyetcontained
inthismanual.PROformanceHoops®reservestherighttomakechangesatanytimewithoutnoticeor
obligation.
Failuretoproperlyinstallthisunitmayresultinpropertydamage,seriousinjuryorevendeath.
Priortoassembly,ensurethewallisstructurallysoundandcapableofsupportingtheentirebasketballgoal
system.
Additionalhardware,supports,bracingorotherstructuralchangesmaybeneededtothemountingareafor
safeinstallationanduseofthisproduct.
Theownerisresponsibleforensuringthewallorstructurethesystemismountedtoisstructurallysoundand
capableofsupportingthestressofthesystem.Ifneeded,contactaprofessionalengineertoevaluateyour
structurebeforehand.Installationmayrequirefullaccesstotherearsideofthestructure.
Readthismanualallthewaythroughbeforestartingtoinstallyoursystem.Thenreadeachstepcompletely
beforebeginninginstallation.Ensureyouunderstandeachstepfullyandcomplywithallstepsforasafe
installation
SafetyInstructions
Itistheresponsibilityofpurchasertoensurethatallinstallersandplayersfullycomplywiththedetailed
instructionssetforthinthisproductinstallationmanual.Productassemblyshouldbecarriedoutexactlyas
instructedandownersupervisionofuseandinstallationisrequiredtopreventriskofproductmalfunctionor
riskinjury.
Alltoolsusedtoassemblethisproductshouldbeusedincompliancewithmanufacturer’sguidelines.
Installationofthisproductwillrequireheavyliftingandbending.Anypersonthatisnotcapableofsuch
activityshouldnotparticipateintheinstallationofthisproduct.
Ifusingaladderduringassembly,useextremecautionandrefertothewarningsandcautionsontheladder.
Duetothesizeandweightofthisproduct,werecommendatleast(3)competentadultsarepresent.
Makesuretherearenooverheadpowerlineswithina25‐footradiusofthebasketballsystem.
Keepallorganicmaterialsawayfrompartsandcomponentstoavoidcorrosion.
Neverdunkorhangonyoursystem.
Neverclimbonanypartofthebasketballsystemasitwasnotintendedforthisactivity.
Neverusethebasketballsystemasaliftortohoistanything.
Playersshouldwearprotectivemouthguardduringplaytoavoidanykindofdentalinjury.
Playersshouldrefrainfromwearinganyjewelrythatcouldpotentiallygetcaughtintherimornet.
Neverallowchildrentoadjustbasketballsystem.
Checkthebasketballsystemandallassociatedhardware,supportsandbracingonaregularbasistoensure
thattherearenosignsofdeteriorationorcorrosion,loosehardware,ordamagedparts.Ifyouseeanysignsof
damage,stopusingimmediatelyandperformmaintenanceorcontactPROformanceHoops®forreplacement.
Formaintenancerepairspleasecontactaprofessional.
Duringinstallationbesurethewallisclearofanytypeofutilities(wires,gaslines,waterlines,etc.)
Besureyouhavesafeaccesstotherearsideofthewalltocompletetheinstallation.
Failuretofollowthesesafetyinstructionscouldresultinproductmalfunction,seriousinjury,orevendeath.
Page 2
PARTS
Wallmount Guide
Upper Arm (2)
Actuator Bushing
Height Sticker
Upper Bracket (2)
Flex Rim (Hoop)
(separate box)
Indicator Strip
Backboard
Actuator with Crank
Lower Bracket (2)
Wall Mount Frame Lower Arm
Page 3
10
ITEMS ARE SHOWN FULL SCALE
Wallmount Guide
1
4
3
2
5
6
7
8
9
HARDWARE
B1
M12 X 35
Hex Bolt
QTY:4
W7
Lock Washer 10mm
QTY:4 (Separate Box)
B3
M12 x 65
Hex Bolt
QTY:4
W2
Flat Washer M16 SS
QTY:4
N2
Nylock Nut 16mm
QTY:2
B4
M16 X 115
Hex Bolt
QTY:1
B2
M12 x 45
Hex Bolt
QTY:2
N1
Nylock Nut 12mm
QTY:10
B5
M16 x 135
Hex Bolt
QTY:1
P1
Nylon Washer M12
QTY:18
P2
Nylon Washer M16
QTY:2
W1
Flat Washer M12 SS
QTY:20
B6
M10 x 55
Carriage Bolt
QTY:4 (Separate Box)
W6
Flat Washer 10mm
QTY:4 (Separate Box)
N6
Flange Nut 10mm
QTY:4 (Separate Box)
Actuator Bushing
QTY:1
Page 4
Bottomofframeshouldbe85"upfromplayingsurface.Thisisneededtoachievefull
rangeofsystemheightadjustability.
Wallhanginglocationistheresponsibilityofthecustomerand/orinstaller.
Itistheresponsibilityofthecustomerand/orinstallertodeterminehowmanyofthe
frame’smountingholesmustbeusedtosafelysecurethewallmountsystemforplay.
Fastenerstobedeterminedandprovidedbythecustomerand/orinstaller.
Ameasure,level,drillsandwrenchesmaybeneededduringassembly.
Thistypeofbasketballgoalcanexertalargeamountofforceonthewallstructurewhereitismounted.It
isveryimportantthatthewallstructureisstrongenoughtowithstandthisforce.
Firstlocatethewallstudstodeterminewherethemountingframewillbeinstalled.
Thebasketballmountingframeissizedtotakeadvantageofwallstudsspacedat16”.Itisveryimportant
tonotethatyourstudspacingmaybedifferent.Evenifthespacingis16”itisrecommendedthatextra
bracingbeaddedtothestuds.Theillustrationbelowshowsreinforcingastudwalllikethatwhichisused
forframingadoororwindow.Priortoinstallationensuretheblockingispreparedatleastaswell.After
properwallreinforcementiscomplete,itcanbecoveredwithappropriatepanelingandpaint.
Itisimportanttoknowthatthehardwaretomountthewallplatetothewallisnotincluded.Itis
recommendedthattheframebefastenedwithboltsthatgoallthewaythroughthereinforcedwall.
Themaximumadjustableheightofthebasketballrimis35”abovethebottomofthewallframe.To
achievea10’rimheightthebottomoftheframeneedstobemounted85”upfromthefloor.
1. Usingalevel,markverticallinesonthe
wall16”apartthatcorrespondtothe
reinforcedwallstudsandbracing.
2. Markahorizontallineon the wall 85" up
from the floor.
3. Positionthewallframewiththebottom
onthehorizontallineandthemounting
holescenteredontheverticallines.
4. Markthemountingholesneededfor
attachmentofframe.
5. Drillappropriatesizeholesasneededin
thewallbasedupontypeofwall
fastenersbeingused.
6. Looselyattachframetothewallusing
appropriatefasteners.
7. Levelframehorizontallyandvertically
usingalevelandtightenfasteners
appropriately.
IMPORTANT
FRAME ATTACHMENT
Page 5
1. Connection C1: Align the rear holes in the Lower Arm
with the lower holes of the Wall Mount Frame. Attach
each side using one B3, two W1, one P1 and one N1.
Another plastic washer P1 should be attached to the
inside of the arm. Allow movement between parts. Do not
over-tighten.
2. Connection C2: Attach the upper extension arms and upper
mounting brackets to the frame. Each connection uses one
B2, two W1, one P1 and one N1. Allow movement between
parts. Do not over-tighten.
3. Connection C3: Attach the lower mounting bracket to the
frame. Each connection uses one B1, two W1 and one N1.
4. Connection C4: Insert the
bushing through the actuator yoke
and the indicator strip. Insert bolt
B5 through a W2, an upper and
lower bracket, the bushing with the
indicator and actuator, the lower
and upper brackets on the other
side, then finish with a W2 and N2.
5. Connection C5: Attach lower
mount of actuator assembly to the
lower extension arm. This
connection uses one B4, two W2,
two P2 and one N2. Do not over-
tighten.
FRAME ASSEMBLY
Page 6
6. Connection C6: Using the actuator, crank the lower arm to a high position. Allow
the upper arms to stay down. Carefully lift and support the backboard and align
upper backboard holes with upper arm holes. Each connection uses one B1, two
W1, two P1 and one N1. Allow movement between parts. Do not over-tighten.
7. Connection C7: Raise and support the backboard to a higher position. Using the
actuator, crank the lower arm to a lower position, aligning lower backboard holes
with the lower arm holes. Each connection uses one B3, two W1, two P1 (which
should be already on the arm) and one N1. Do not over-tighten.
BACKBOARD ATTACHMENT
Page 7
8. Connection C8: Remove the cover plate from the underside of the rim assembly.
Put the rim against the backboard and align holes. Attach with four B6, four W6 four
W7 and four N6, making sure the rim is straight and level. Tighten completely.
Replace the cover plate.
-Raise the backboard assembly
until the rim is 10 feet high
above the floor.
-Make a mark on the actuator in
line with the bottom edge of the
indicator.
-Lower the backboard assembly
all the way.
-Peel off and apply the rim
height sticker to the actuator,
lining up the 10’ line on the
mark previously made.
RIM (HOOP) ATTACHMENT
RIM HEIGHT STICKER ATTACHMENT
Page 8
8 www.PROformanceHoops.com
1-888-353-4667
BUYER AGREES THAT PRODUCTS SOLD BY PROformance Hoops CARRY THE FOLLOWING WARRANTY
Subject to proper installation, and normal intended use, all structural components of PROview Series*, Force Series*, and Wall
Mount Basketball Systems are warranted to the original owner to be free of defects in materials and workmanship for the duration of
ownership by the original retail purchaser, subject to the limitations below. PROformance Hoops shall have the right to require the
purchaser to deliver the allegedly defective products to PROformance Hoops for testing, repair, or replacement.
PROformance Hoops shall not be responsible for any expense associated with the replacement or removal of the product from its
application for such delivery. Freight and Handling charges may apply to covered warranty parts. Modification of any product by the
customer, unless approved by PROformance Hoops, will void all warranty. Where listed as “LIMITED”, the warranties shall cover
damage of failure that occurs during the course of NORMAL or INTENDED USE of the product. Normal or intended use shall be
described as activity that is necessary for the participation in the sport for which the equipment is damaged. NOT COVERED is
damaged caused by deliberate hanging, multiple player hanging, vandalism, non-basketball activities, or any other activity that could be
regarded as abusive.
Padding Warranty: Multi-Purpose Backboard Edge Padding: one year limited; Indoor Backboard Edge Padding: five year limited
(indoor only); Custom-Fit Pole Padding: one year limited; Wrap-Around Pole Padding: one year limited.
NOT COVERED BY THIS WARRANTY
Use in non-residential applications.
Any products subjected to abuse, negligence, improper installation, vandalism, acts of God, alteration of product or any other events
beyond the control of PROformance Hoops.
Paint or rusted parts.
Deterioration of product due to time and wear.
Normal deterioration of products due to atmospheric conditions, weather, rust, wear and tear (including paint), or other causes that do
not affect functional use are not covered by PROformance Hoops warranties. All warranties are valid only when product is used in the
intended application, and when installed according to PROforrmance Hoops instructions. Warranty will be void if maintenance
instructions in the Owner’s Manual are not followed, including jack lubrication on a bi-yearly basis. If you did not receive an Owner’s
Manual, please contact PROformanceHoops.com and one will be sent to you.
WARRANTY CLAIMS: All returns must be arranged through the local dealer if available. Warranties do not cover dealer service
charges, labor charges, freight or travel expense associated with replacement, repair, or removal of warranty item. A warranty claim
form must be completed, and photos submitted for any item you wish to claim under warranty. If the purchase was not made through a
dealer, this form is available by email. In response to your claim, you will receive an order confirmation as well as a notice stating
whether PROformance Hoops needs your warranty item returned. PROformance Hoops will notify you if we determine that the item
cannot be claimed under warranty. PROformance Hoops is not responsible for any charges for labor to install or repair
defective product prior authorization. PROformance Hoops will determine the most economical method to either repair or
replace product before any work is to commence.
TO THE MAXIMUM EXTENT PERMITTED BY LAW, THIS WARRANTY AND THE REMEDIES SET FORTH HEREIN ARE
EXCLUSIVE AND EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES
OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF PROFORMANCE HOOPS CANNOT DISCLAIM OR
EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW, THEN TO THE EXTENT POSSIBLE ANY CLAIMS UNDER SUCH
IMPLIED WARRANTIES SHALL EXPIRE OR EXPIRATION OR THE APPLICABLE WARRANTY PERIOD. SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. PROFORMANCE HOOPS DOES NOT ASSUME OR AUTHORIZE ANY PERSON TO ASSUME FOR US, ANY OTHER
LIABILITY IN CONNECTION WITH THE SALE OF OUR PRODUCTS.
TO THE MAXIMUM EXTENT PERMITTED BY LAW, PROFORMANCE HOOPS ASSUMES NO RESPONSIBILITY FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHICH MAY ARISE FROM THE PURCHASERS OR USE OF OUR EQUIPMENT.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGE, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
IF ANY PROVISION OF THIS WARRANTY IS INVALID, VOID OR UNENFORCEABLE IN ANY INSTANCE OR RESPECT, THE
UNENFORCEABLE PROVISION WILL BE SEVERED AND REFORMED TO EFFECT THE INTENT OF THIS LIMITED WARRANTY
TO THE MAXIMUM EXTENT POSSIBLE, AND THE REMAINING PROVISIONS SHALL CONTINUE IN FULL FORCE AND EFFECT
AND SHALL BE ENFORCED TO THE FULL EXTENT PERMITTED BY LAW.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state
091422
WARRANTIES
Page 9
This manual suits for next models
3
Table of contents
