PROLiNK PIC1007WP User manual

Wireless IP Camera
Version 1.00
(English)
BEFORE GETTING STARTED
This UM is designed to aid you to get started with the device. If you experience problems following these guides or need further
information pertaining to the device, please visit our website at www.prolink2u.com. All specifications are subject to the
manufacturer’s configuration at the time of shipping and mau change without prior notice, written or otherwise.

Table of Contents
Table of Contents . ..................................................................................................................... 3
1. Introduction . ........................................................................................................................ 5
1.1.The Differences . ................................................................................................................. 5
2. Installation & Setup . ............................................................................................................ 6
1.2.Hardware Overview . ........................................................................................................... 6
1.3.Quick Installation and Usage . ............................................................................................. 7
1.3.1.Step 1 : Connect the IP CAM to the home/office network . ............................................... 7
1.3.2.Step 2 : Install the LiveView Software on the notebook/PC . .............................................. 7
1.3.3.Step 3 : Use LiveView program to see the video . ............................................................. 8
1.3.4.Seeing the video from remote location . ........................................................................... 8
1.4.Wireless Connection. .......................................................................................................... 9
10
3. Web Configurations. ............................................................................................................
1.5.Information. ................................................................................................................... 11
1.6.Video Display. .................................................................................................................
12
1.7.Network . ........................................................................................................................
13
1.8.WiFi Security. .................................................................................................................
14
1.9.Advanced Network. ........................................................................................................
16
1.10.Video Settings. ..............................................................................................................
16
1.11.Mobile Video Settings. ...................................................................................................
18
1.12.Night Mode Control. .....................................................................................................
18
1.13.Email/Ftp Alarm. ..........................................................................................................
19
1.14.Speaker Alarm Settings. .............................................................................................
21
1.15.NAS Settings. ..............................................................................................................
21
1.16.Sd-Card Settings . ........................................................................................................
23
1.17.Infrared thermometer . ................................................................................................
24
1.18.Scheduling. ...................................................................................................................
25
1.19.LED Control . .................................................................................................................
26
1.20.Date/Time . ...................................................................................................................
26
1.21.Admin . .........................................................................................................................
27
1.22.Upgr ade. .......................................................................................................................
28
1.23.Reboot . .........................................................................................................................
29
1.24.Safe Mode . ..................................................................................................................
30
1.25.Set To Factory Default . .................................................................................................
30

4. Features & Specifications .........................................................................................................
..........................................................................................................................
...................................................................................................................
...................................................................................................................
...........................................................................
.........................................................................................
.......................................................................................................
..............................................................................................
................................
........................
31
1.26. Features 31
1.27.Specification 32
5. Package Contents
34
33
Appendix A. List of Tested NAT/Router Device
35
36
Appendix B. Performance Information
43
43
43
Appendix C. Troubleshooting
Worldwide Customer Care Centers
Register Online For Your Product Warranty @ www.prolink2u.com/register
PROLiNK® is a trademark of FIDA INTERNATIONAL (S) PTE LTD and is manufactured under its
authority. All other brands, products, services, logos and company names mentioned herein are
trademarks of their respective owners. All specifications, designs and contents are subject to
changes without prior notice. © Copyright 2013. PROLiNK® all rights reserved.

1. Introduction
The PROLiNK® PIC1007WP MegaPixel Dual Lens Wireless IP Camera (will be referred to as “IP Camera for the entire
document) is designed with the ” user friendly“ idea in mind. You can install the IP Camera easily on your home
network and then access the IP Camera anywhere in the world from your mobile or pc with only a camera id and
password. There are no user registration, no fixed IP address, no complicated DDNS setup or changing the router’s
settings. It is truly a Plug & Play experience.
At the heart of this IP Camera, lies not one but two Lens and two Sensors uniquely designed for day and night
operation. One lens is specially tuned for day and the other for night, and this eliminates the need of a mechanical
controlled IR-cut filter which is traditionally used by night vision camera. With this unique design , you no longer face
mechanical failyres that affects night vision and video quality. It is also coupled with two high power IR LED with an
effective range of 10m to provide a clearer visual even in total darkness.
Next, the IP Camera provides the best video quality in its class and excellent performance. Using the latest H.264
video compression technology, the IP camera offers High Definition 1280x800 resolution at 30 fps frame rate. In
addition to the high performance, the IP Camera comes with built-in microphone and speaker that enables remote
users to not only view but also allow 2-way communication for additional monitoring options.
For easy and flexible setup, the IP Camera provides both wireless IEEE 802.11 b/g/n and wired Ethernet network
interfaces. It supports the WEP and WPA2 (Wi-Fi Protected Access) security modes to provide the best security for
wireless networks. It also comes with built-in with WPS (WiFi Protected Setup) button for wuick and hassle free
wireless connection setup.
Micro-SD card slot and NAS storage support is built right into the IP Camera to provide recording and playback with
out the need of a dedicated NVR as with conventional cctv system Scheduling function is also available with
advanced trigger detection to make sure all important events are recorded timely into Micro-SD card or NAS storage.
For intrusion prevention, the IP Camera provides advanced PIR/Motion/Sound/Temperature detection function. You
can easily setup these functions and receive alerts via Push notification or Email/FTP with the snapshot images when
events alerts are detected.
The IP Camera is ideal for securing small businesses, home offices and residences over a local area network and/or
the Internet.
1.1. The Differences
TRUE Plug & Play. It’s very easy to see the video of the IP Camera from anywhere in the world, you only need to key
in the ID/Password of the IP Camera, and you DO NOT need to remember the IP address or domain name or DDNS
name or port number, And you do not need to modify the settings (like port mapping, fixed IP, DDNS, virtual server)
of the NAT/router devices, just Plug&Play to use it.
EN 5

2. Installation & Setup
aremaCPIehtfostnenopmocrojamehteess’tel,tsriF.esudnallatsniotysaeyrevebotdengisedsiaremaCPIehT
products.
1.2. Hardware Overview
Figure 2-1: IP Camera Hardware Overview
Dual Lens
1
IR LED
2
PIR3
Microphone4
Thermometer5
Ethernet Indicator LED6
Internet Indicator LED
7
SD Card LED8
External Speaker Jack
9
Micro-SD Card Slot
10
Internal Speaker11
WPS Button12
Power Jack
17
Bracket Screw Jack
18
Reset Button19
Wall Mount20
Camera ID & Password21
Light Detector13
Bracket Screw Jack14
Wall Mount
15
Ethernet Jack16
1
2
3
4
5
6
7
8
14 18
19
20
15
16
17
9
10
11
12
13
21
EN 6

Figure 2-2: Connect Ethernet cable to a switch/router.
1.3.2. Step 2 : Install the LiveView Software on your notebook/PC
Figure 2-3 : Setup CD
1.3. Quick Installation and Usage
Setting up the IP Camera is as Easy as 1-2-3.
Step 1 Connect the IP Camera to your home/office network.
Step 2 Install the LiveView Software on your notebook/PC.
Step 3 Key in the Password of the IP Camera in the LiveView, and you are done.
1.3.1. Step 1 : Connect the IP CAM to your home/office network
LAN
WAN
NAT/Router
PIC1007WP
Power Adapter
Ethernet Cable
Internet
(Wired)
Please plug the power adapter to the IP Camera , and turn the power socket switch on. Connect one end of
the Ethernet cable to the IP Camera and another end to the home or office network. Usually, this Ethernet
cable is plugged into a home NAT/router device or an Ethernet switch if in the office (as shown in Figure 2-2).
Since the default settings of the IP Camera use DHCP function and very often there is a DHCP server on most
of the home/office network, the IP Camera should be connected to the Internet immediately. The Internet
status LED should be red and constant to indicate it has a good connection status. If the LED is blinking, please
refer to section 1.7~1.9 to try other network settings.
Please insert the installation CD into the CD-ROM drive (for
Windows OS platform only). The Setup CD will autorun and you
should see the Main Menu immediately. Select Management
Softw are and follow the instructions to complete the setup. When
completed, LiveView and LivePlay icons will be created in the
desktop area.
Notice
1. Before installing LiveView on your notebook or PC, please make
sure you have correctly installed the IP Camera. It is highly
recommended to close other Windows applications to prevent any
possible conflict in the installation process.
2. For LiveView Mac version, kindly download the software from our
website at www.prolink2u.com. (Mac version is still in beta and some
features may not function as intended.)
EN 7
©
C
o
p
y
r
i
g
h
t
2
0
1
3
P
R
O
L
i
N
K
A
l
l
R
i
g
h
t
s
R
e
s
e
r
v
e
d
.
PIC1007WP
Wireless IP
Camera
CD Contents:
•
Management Software
•
Quick Installation
Guide
Version 1.0 (Apr’13)

1.3.3. Step 3 : Key Password in LiveView and Ready to View
Figure 2-4 : Camera ID & Password
Figure 2-5 : LiveView Software User Interface
1.3.4. Seeing the video from remote location
If the computer and IP Camera are connected to the same
network, the IP Camera ID will automatically be displayed
in the “Auto Search” list . To see the video, just double click
the IP Camera ID item in the “Auto Search” list. For example,
if the IP Camera ID is 001001029, you can then double
click the 001001029 item in the “Auto Search” list to view
the video. When prompted for the IP Camera password,
please key-in the password into this field and click “ OK”.
The video will then be displayed on the window. Password
can be retrieved from ID/Password card or label located at
rear of the IP Camera as shown in Figure 2-4.
After the IP Camera is installed and you can see the video from the LiveView Software in the local network
.
It is also very easy to see the video from remote location. All you need to do is add a camera item in the
“CameraList” folder of the LiveView Software; key in the IP Camera ID and Password (refer to your ID/Password
card or label on the bottom of camera). And then double click this camera item. You will then see the
Camera video immediately. No further NAT/router setting modifications are needed.
Notice
1. You can modify this play-video password in the web configuration page.
Please refer to section 1.10 for more information.
EN 8

Figure 2-6: Pop-up play-video password window
1.4. Wireless Connection
The IP Camera can also be connected to the home/office network through the 802.11 b/g/n wireless
connection. The easiest way to setup the IP Camera to connect via wireless to your WiFi AP/router
is to use the WPS button. If your WiFi AP/router is configured for WPS, just push the WPS button
on both the IP Camera and router, and it will automatically insert the necessary WiFi settings into the
camera.
If your WiFi AP/router does not support WPS, write down the WiFi security parameters used in this
WiFi AP/router, including the SSID, security mode, encryption protocols and the “key” values. The
supported WiFi security mode of the IP Camera is WEP (64 bits and 128 bits) and WPA(2)-PSK (TKIP
and AES). In most of the home/office WiFi environment, this is quite enough.
Go to web configure page and select “WiFi Security”. Set the WiFi settings on the IP Camera using the
parameters from the AP/router (please refer to section 1.8 for more detailed description if needed).
You can now test if the above WiFi settings are correct. Click the “WiFi test” and the testing result
will be displayed in less than 60 seconds. If the test is not successful,please check the WiFi security
parameters and test again.
If the WiFi test is successful, you can then enable the WiFi connection by unplugging the Ethernet cable
from the IP Camera. The IP Camera will detect the Ethernet cable unplugged condition and start the
WiFi connection. After the WiFi is connected, the IP Camera will connect to the Internet immediately.
Notice
1. Please remember that the WiFi connection will use a different IP address, you will need to do the
“Auto Search” function in the LiveView to find the IP Camera again after the WiFi is connected.
2. If you want to switch back to the wired Ethernet connection, just plug in the Ethernet cable into the IP Camera again.
You do not need to disable the WiFi function on the web pages.
Figure 2-7: Unplug the Ethernet cable
if WiFi test is successful.
LAN
WAN
NAT/Router
PIC1007WP
Power Adapter
EN 9

3. Web Configurations
Figure 3-1: Open the web configuration page from LiveView Software
Figure 3-2: IP Camera Web configuration login page
The default login account is “admin”, leave the Password field empty.
You can login to the web configuration page by directly key-in the IP address of the IP Camera or right-click the
searched IP Camera in the “Auto Search” list of the LiveView Software and click the “Web Configure” to open the login
window of the IP Camera.
EN 10