Promate Azzur User manual

Bluetooth™ Keyboard with Mul-angle Detachable Case Stand
for iPad
Angled
Viewing
Lightweight 10 m
Transmit
v 3.0 + EDR InterlockLED
Indicator

1. Introducon
Bluetooth™ is a short-distance wireless communicaon technology.
Any devices with a Bluetooth™ feature, such as mobile phones,
PDAs, PCs, headsets, mice, keypads, keyboards, printers and other
mobile fings, can work as wireless devices. Designed accordingly
to global standards, Bluetooth™ technology applies to the
internaonally cerfied ISM bandwidth. The frequency band ranges
from 2.4GHz to 2.48 GHz, and is divided up into 79 channels by way
of frequency hopping through 1,600 different combinaons. Data
transmission is effecve within a range of up to 10 meters.
2. Feautures
• Wireless Bluetooth™ keyboard for iPad 2, the new iPad and iPad
with Rena Display
• Removable plasc casing for use as protecve case or work staon
stand
• Unique interlock design with foldable neck
• Mul angled rotatable viewing opons
• Lightweight and durable plasc shell casing
3. Specificaons
• Bluetooth™ specificaon: Version 3.0 Class 2
• Range of Frequency: 2.4GHz spectrum
• Operang Voltage: 3.7V DC(powered by Li-ion baery)
• Operang current:<SmA
• Standby current: 1.0mA
• Sleep current: <0.25mA
• Transmit Range: up to 10 meters

4. LED Indicators
• Blue LED Blinking: Pairing
• Red LED on: Charging
• Green LED on: Baery is fully charged
• Green LED blinking: baterry needs to be charged
• Yellow LED on: Caps Lock
6. Pairing Azzur with your iPad© Bluetooth™
enabled device.
• Turn on the keyboard and press the CONNECT key on the
keyboard. The LED light will blink blue.
• Then on the screen of the iPad©, search for Sengs -> General ->
Bluetooth™.
• Enable the Bluetooth™ funcon, and it will search for Azzur
automacally.
5. Charging the baery
• For the first me user, please charge the keyboard for at least 6
hours before using it. Thereaer, charge for at least 2 hours when
the baery runs low.
• The LED blinks green when baery is low. The LED light is green
when it is fully charged
• To charge the keyboard, connect the 5V,DC input from the
keyboard into the computer USB port with the connector cable
provided. The keyboard can funcon while charging.

• When the Azzur is discovered, select “Azzur” from the
iPad© screen. A passkey will appear on the screen of the
iPad.
• Type in the passkey provided and press the ENTER key on
the keyboard. Your Azzur will then be successfully paired
with your iPad©.

7. Schemac diagram

1) To remove the stand from keyboard, pull adjust buon down
whilst pulling stand up
2) Gently remove the case, then it separates from keyboard.
8. Installaon and removal

1) To remove case from stand, open the protecve case and press
the rotaon buon with your thumb and forefinger
2) Gently remove the case, then it separates from stand.
3) Take the case away, and remove iPad with an upward moon.

9. Troubleshoong
If the keyboard is not working with the iPad (or other Bluetooth™
device) make sure:
• The Bluetooth™ funcon on the iPad (or other Bluetooth™
devices) is enabled.
• The Bluetooth™ keyboard is within 33 feet of the iPad.
• The passkey is entered correctly.
• Restart the computer (or other Bluetooth™ devices)
• Baery may be low, please recharge
• If you accidently press the CONNECT key when the two devices are
already connected, it will cause a malfuncon of the keyboard. The
LED light of the CONNECT key will keep blinking. To solve this
problem, simply restart the keyboard by turning it on again. A
pairing will not be required if it has been previously done.
WARNINGS
Baery:
• Never use another type of baery to replace the rechargeable
baeries. When the device is not in use, switch OFF the device to
avoid damaging the baeries.
• The baeries must be fully charged when using for the first me.
An inial of 6 hours charge is required to guarantee an acceptable
service life for the rechargeable baeries.
• Replace only with the same or equivalent type.

Keeping the device out of the reach of small
children:
• The packing products and the plasc bags for the accessories are
not toys.
• The bag itself and the small fings inside can cause suffocaon.
Do not aempt to disassemble the device. No parts embedded can
be replaced or repaired by users.
• Only authorized dealers or maintenance centers can disassemble
this product. For issues with any parts including normal wear, break,
or damages, please contact your dealer.
• Keep the product away from rain or other liquids.

Bluetooth™ Keyboard with Mul-angle Detachable Case Stand
for iPad