PROPHON CXL122MP User manual

High End Sound Systems, designed and manufactured in Sweden
CXL122MP(A)
2-way, 12” / 2” (self-powered / bi-ampli ed) Multi Purpose Speaker / stage monitor

Presentation:
PROPHON
CXL122MP(A)
The PROPHON CXL122MP is a lightweight, two-way Multi Purpose speaker with a 12”-Neodymium woofer, and a coaxially
mounted 2”-Neodymium driver, on a horn with a 80
o
conical dispersion with a deticated built-in passive crossover network.
The coaxial design has many bene ts; true point-source, equal dispersion over the whole frequency range,
space saving design gives a relative small sized cabinet, to name but a few.
CXL122MP is one of the most versatile speakers on the market, with an abundance of features and applications:
- High power Stage monitor,
- Stand alone fullrange speaker,
- Drum ll, side ll, front ll,
- Delay system,
- Installed as a fullrange speaker or as a top in an active sound system with subwoofers,
- As a mid / high speaker in an active bi-amped system with any of the PROPHON subwoofers.
(please see seperate datasheet for our range of subwoofers)
The cabinet is manufactured from high-quality,18 mm. multi-layer,  nnish birch-plywood, using high precision fully computer-controled
CNC-machines, and painted with a specially developed two-component hardened lacque.
The drivers are protected by a 1,5 mm thick, fully covering, perfored steel grille with a speaker foam in front,
both with minimum air  ow resistance and acoustic interferance.
Discretely hidden in one of the two handles there is a 35mm. top hat for mounting on a speaker stand,
The CXL122MP has four cargo restraint tracks for rigging,  ying and installing, a monitor angle for use as a stage monitor,
protective rails and tilting hardware in the back.
Active, self-powered version
The CXL122MPA houses a 700W Ampli er with on-board DSP.
Neutrik XLR in / out for signal
Neutrik Powercon in / out for power
Four presets with different setting depending on application (push the
”preset select”
for changing setup)
Preset4)
High-Pass  lter2 @ 95Hz, the same frequency responce as preset2, but cut at 95Hz,
for use as a stage monitor or as a top in an active sound system with subwoofers.
Preset3)
High-Pass  lter1 @ 95Hz, for use as a stage monitor
or as a topp speaker in an active system with subwoofers.
Preset2)
Extended fullrange, for use as ”stand-alone” sound system,
with extended fullrange frequency responce.
Preset1)
Fullrange, using this preset the active version has the same frequency responce
as the passive / bi-amped.
CXL122MP(A)
Manual / User guide / Technical data sheet (2011-10-01)
CXL122MP(A)
Manual / User guide / Technical data sheet (2011-10-01)
CXL122MP(A)
as the passive / bi-amped.

Technical data
CXL122MP:
Model
CXL122MP
Low frequency driver
1 x 12” Neodymium wooferr,
3”- voice coil
High frequency driver
1 x 1,4”- throat exit
neodymium driver,
with 3”- voice coil
Construction
Bi-amped,
passive crossover
Tuned bassre ex
Sensitivity
10 dB@1W/1m.
Nominal impedance
8 ohm
Power handling R.M.S.
400W
Power Handling cont.
800W
Max SPL, open space (calc.)
129 @ 1000W
frequency responce +/- 6dB
50Hz - 19kHz
Vertical dispersion -6dB
80
o
Horisontal dispersion -6dB
80
o
Measurements H x W x D mm.
340 x 500 x 420
Weight
17 kg.
Recommended crossover
in an active system with
subwoofers
HP@90-120Hz, 24-48dB/oct
Recommended Ampli er
PROPHON P3000, P3000DSP
Recommended pre-
programmed DSP processors
PROPHON DSP260,
PROPHON DSP480
Recommended Powerage
400W - 800W
Connections
2 x Neutrik Speakon
1+ /1- Input / through
2+ / 2- Link
Applications
- Fixed Installations.
- Live performances.
- Monitor.
- Fullrange speaker
- Mid/high in a PA- system with
subwoofer
Accessories
- Transportation case
- Flightware for rigging
Extended Technical data
Active version (A):
Built in ampli er
700W @ 8 ohm
Input
Neutrik XLR female
Out / Through
Neutrik XLR male
Power chord in
Neutrik Powercon
blue in / grey out, (max 7A/1600W)
volume control
mute to +6dB
DSP PRESETS
Four DSP PRESETS
4) TOP / MONITOR 2 (HP-FILTER2)
3) TOP / MONITOR 1 (HP-FILTER1)
2) EXTENDED FULLRANGE
1) FULLRANGE
Power
115V-230V +/- 15%, 50-60Hz
Prophon Audio & Teknik AB, Stockholm, Sweden,
Tel: [phone], Fax: [phone], Mail: [email protected], web: www.prophon.com
(2011-10-01, All data are subjects to change without prior noti cation)
Dispersion pattern, in 3D and 2D
Transportation case for 2 x CXL122MP(A)
W
D
H
Dimensions
2 x CXL122MP in an active rigg with
2 x B1HPA self-powered 18” subwoofers