proquip TT1840 User manual

2.
4.
1.
3.
5.
Clean out the debris lter basket
located under the seperator hood.
Empty the recovery tank and rinse
thoroughly with clean water.
Clean air lter, keep this dry.Ensure the seperator seal is clean and
undamaged. Replace if necessary.
IMPORTANT: Clean underside of
squegee from dirt and debris.
NTT1840DMVNo1
REPORT ALL DAMAGES AND TECHNICAL ISSUES TO THE SUPERVISOR
AFTER EVERY USE, ENSURE
THAT YOU COMPLETE THE
FOLLOWING 6 STEPS
NUMATIC TWINTEC CABLE
TT1840
DAILY MAINTENANCE CHART

AFTER EVERY WEEK, ENSURE
THAT YOU COMPLETE THE
FOLLOWING 4 STEPS
1.
3.
2.
4.
Check all 3 hoses for damage, holes and
obstructions.
Thoroughly clean top seperator hood, lter,
basket and seal.
Remove squegee and check for wear and
damage. Clean thoroughly. Remove brushes/pad drives and
check for wear and damage.
NTT1840WMVNo1
REPORT ALL DAMAGES AND TECHNICAL ISSUES TO THE SUPERVISOR
NUMATIC TWINTEC CABLE
TT1840
WEEKLY MAINTENANCE CHART
1
2
3