ProtoArc EK01 Plus User manual
Product Features
Caps Lock Indicator
Keyboard Backlight
Switch Button
Power Indicator
(Low Power /
Charging Indicator)
Power Switch
USB Receiver
Type-C Charging Port
2.4G
Channel
Bluetooth
Channel 1
BT1 Indicator
B2 Indicator2.4G Indicator
Bluetooth
Channel 2
Switch backlight brightness (Dimly, Medium brightness, Brightest)
The first press will turn on the backlight with a very dim brightness.
The second press will increase the brightness to a medium level.
The third press will set the backlight to the highest brightness.
The fourth press will turn off the backlight.
After 1 minute of inactivity, the backlight automatically turns off, and
press any key to wake up.
After 60 minutes of inactivity, the backlight will automatically turn off,
and the keyboard enters deep sleep mode. Press any key to wake up
the keyboard, and the backlight needs to be turned on again.
- 1 -
2.4G USB Connection
1 2
3 4
1. Turn the power switch to ON. 2. Take out the USB receiver.
3. Plug it into a USB port on your
computer.
4. Press key to switch to 2.4G
channel, the white indicator will
flash slowly, enter into 2.4G
channel.
- 2 -
Bluetooth Connection
1 2
3
1. Turn the power switch to ON.
3. Turn on the Bluetooth settings on your device, search or select “ProtoArc
EK01 Plus” and start Bluetooth pairing until the connection is completed.
2. Single press / channel button, and
the indicator light flashes once to enter the
Bluetooth channel. Long press this
Bluetooth channel button for 3–5 seconds
again, the indicator light flashes quickly,
then the keyboard enters into the Bluetooth
pairing mode.
Bluetooth
Settings
ProtoArc EK01 Plus
ProtoArc EK01 Plus Connected
On
1
2
3
4
- 3 -
How to Switch Device Channels
After are connected, press the corresponding channel key to
switch between devices.
Charging Guide
1. When low power, the backlight will automatically turn off first, and then the
power indicator light will turn red and flash quickly.
2. Insert the Type-C port into the keyboard and the USB-A port into the
computer to charge, the red light stays on while charging.
3. It takes 2–3 hours for one cycles full charged, and the indicator turns green
when fully charged.
BT 1 Device Channel
BT 2 Device
Channel
2.4G USB
Device Channel
- 4 -
Multimedia Function Button
Open Setting / / /
- 5 -
Product Specification
Sleep Mode
1. When the keyboard is idle for more than 60 minutes, it will automatically
enter sleep mode and the indicator light will turn off.
2. To wake up the keyboard, simply press any key on the keyboard, and it will
be ready within 3 seconds. The indicator light will light up again.
2000mAh
≥ 365 Days
480.1 x 244.4 x 25.6 mm / 18.9 x 9.6 x 1.0 in
- 6 -
Tips
Packing List
1. If the Bluetooth connection is not working properly, turn off and turn on the
keyboard again to restart the device's Bluetooth and attempt to reconnect. Or
delete the extra Bluetooth option name in the Bluetooth connection list of the
device and reconnect.
2. To switch to a successfully connected channel, press the channel button
and wait for 3 seconds before continuing to use.
3. The keyboard has a memory function. When it connected on a specific
channel, turn off the keyboard and turn on again, they will automatically
connect to the default channel and this channel indicator is on.
- 7 -
Table of contents
Other ProtoArc Keyboard manuals
