PTZOptics PT12X-NDI-WH User manual

®
Share Your Vision
Please check PTZOPTICS.com for the most up to date version of this document Rev. 1.3 8/20
Model Number:
PT12X-NDI-GY (gray)
PT12X-NDI-WH (white)
http://ptzoptics.com/ndi/
PTZOPTICS
Broadcast & Conference Camera
The PTZOptics 12X-NDI is a 1080p camera with 12X optical zoom for capturing both wide angles and long
shots. With support for NDI|HX, 3G-SDI, HDMI, and IP streaming (H.264, H.265, & MJPEG), this camera is
ideal for broadcasting high definition video signals for broadcast, recording, or video conferencing
applications.
KEY FEATURES
•72.5 degree wide-angle lens.
•High performance in low light scenarios with Wide Dynamic Range.
•Full 1920x1080p HD Resolutions up to 60 frames per second.
•2D and 3D noise reduction with our latest “low noise CMOS sensor”.
•RS232 & RS485 (Serial), IP (LAN/WAN), & NDI|HX control
•H.264, H.265, & MJPEG Streaming over RJ-45 LAN port
•HDMI, 3G-SDI, & NDI or IP streaming (3 simultaneously)
•PoE (Power over Ethernet) or 12VDC
•5-year warranty
•Photobooth capable
Camera & Lens
Rear Board
Video Sensor
1/2.7” CMOS, 2.12 Mega Pixels
Video Output
Interface
NDI | HX, HDMI, 3G-SDI, IP, CVBS
Frame Rates
1080p-60/50/30/25, 1080-60/50,
720p-60/50/30/25
Network Interface
RJ45
Audio Interface
Line In, 3.5mm (NDI, HDMI, & IP Stream)
Frame Rates (CVBS)
576i-30, 480i-30
Communication
Interface
RS-232, RS-485, PELCO-D/P, NDI
Focal Length
12x, F3.5mm-42.3mm, F1.8-F2.8
Baud Rate
2400/4800/9600 bits
Lens Zoom
12x
Power Supply
Interface
JEITA type Power Adapter (DC IN 12V)
Field of View
72.5°
3G-SDI Interface
BNC –75 Ohm, Female
Min Lux
0.05 Lux (@F1.8, AGC ON)
USB 2.0 Interface
Future Use
Shutter Speed
1/30s - 1/10000s
SNR
≥55dB
Electrical Index
Vertical Flip & Mirror
Supported
Power Supply
12W (Max)
Horizontal Angle of View
6.9° (tele) to 72.5° (wide)
Input Voltage
12V DC (10.8 - 13.0V DC) or PoE 802.3af
Vertical Angle of View
3.9° (tele) to 44.8° (wide)
Working Environment
Indoor
Physical Specifications
Dimension (in.)
5.6W x 6.5H x 6.7D (7.88H max w/ Tilt)
Pan & Tilt Movement
Dimensions (mm)
142W x 164H x 169D (189H max w/ Tilt)
Pan Movement
±170°
Box Dimensions
9” x 9” x 10” | 229mm x 254mm x 229mm
Tilt Rotation
Up: 90°, Down: 30°
Camera Weight
3.20 lbs. (1.45 kg)
Presets
10 via IR (255 via Serial or IP)
Boxed Weight
5.4 lbs. (2.45 kg)
WHAT’S IN THE BOX
12X Zoom NDI|HX Camera
Power Adapter + Cord
IR Remote Control
RS-232C Cable
Quick Start Guide
(2) AAA Batteries

T
P
Z
OPTICS
DATA SHEET PTZOptics Specifications & Diagrams
152 Robbins Road Downingtown, PA 19335 PTZOptics.com 800-486-5276
1. Standby Button
Press this button to enter standby mode.
Press it again to enter normal mode.
NOTE: Power consumption in standby mode
is approximately half of the normal mode.
2. Position Buttons (0-9)
To set preset or call presets and for Special
Shortcut Functions.
3. * (asterisk) Button
For use with multiple function buttons (see
12)
4&13. Set/Clear Preset Buttons
Set preset: Store a preset position [PRESET]
+ Numeric button (0-9): Setting a
corresponding numeric key preset position.
Clear preset: Erase a preset position
[RESET] + Numeric button (0-9)
Note: [*] + [#] + [RESET]: Erase all presets.
5&14. Pan/Tilt & Home Control Buttons
Press the arrow buttons to perform panning
and tilting. Press the [HOME] button to face
the camera back to its Home position.
6. Return Button
Press button to return to previous menu.
7. Zoom Buttons (Slow & Fast)
Zoom+: Zoom In (Slow and fast speeds)
Zoom-: Zoom Out (Slow and fast speeds)
8. L/R Set Button
Set the left & right direction of panning
control. Hold [L/R Set] + Press [1]: Normal
panning direction. Hold [L/R Set] + Press [2]:
Left and right panning direction will be
reversed.
9. Focus Buttons
Used for focus adjustment. Press [AUTO] to
adjust the focus on the center of the object
automatically. To adjust the focus manually,
press the [MANUAL] button, and then
adjust focus with [Far] (focus on far object)
and [Near] focus on near object).
10. Camera Address Select Buttons
Press the button corresponding to the
camera which you want to operate with the
IR remote controller.
11. # Button
For use with multiple function buttons (see
12)
12.Multiple Function Buttons
Function 1. Set camera IR address function:
Press 3 keys consecutively to set the camera’s
IR address as follow:
[*] + [#] + [F1]: IR Address 1
[*] + [#] + [F2]: IR Address 2
[*] + [#] + [F3]: IR Address 3
[*] + [#] + [F4]: IR Address 4
Function 2. Image freezing function: Press [F4]
to start the freeze function. The word "Freeze"
displays on the upper left corner. After five
seconds, the display disappears automatically
(though the freeze feature continues). To cancel
the freeze, press the [F4] key the word
"Unfreeze" displays on the upper left corner.
After five seconds, the display disappears
automatically.
15. Menu Button
OSD Menu Settings: Press this button to enter
or exit the OSD (on screen display) menu.
16. Backlight Button
Backlight (aka BLC) button: Press this button to
enable backlight compensation. Press it again to
disable backlight compensation.
NOTE: Effective only in auto exposure mode.
NOTE: If there is a light behind the subject, the
subject will appear dark (i.e. silhouetted). In this
case, press the backlight button to turn BLC On.
To cancel this function, press the backlight
button to turn BLC Off.
17. P/T RST Button
Press the button to self-calibrate the pan and tilt
positions and limits.
Special Shortcut Functions
[*] + [#] + [1]: Display OSD menu in English
[*] + [#] + [3]: Display OSD menu in Chinese
[*] + [#] + [4]: Show IP address
[*] + [#] + [6]: Quickly restore default settings
[*] + [#] + [8]: Show the camera FW version
[*] + [#] + [9]: Quickly set mounting mode
(vertical flip / normal)
[*] + [#] + [MANUAL]: Resets IP information
[#] + [*] + [4]: Enable DHCP IP addressing
[#] + [*] + [#] + [1]: Set IP to 192.168.100.81
[#] + [*] + [#] + [2]: Set IP to 192.168.100.82
[#] + [*] + [#] + [3]: Set IP to 192.168.100.83
[#] + [*] + [#] + [4]: Set IP to 192.168.100.84
[#] + [*] + [#] + [5]: Set IP to 192.168.100.85
[#] + [*] + [#] + [6]: Set IP to 192.168.100.86
[#] + [*] + [#] + [7]: Set IP to 192.168.100.87
[#] + [*] + [#] + [8]: Set IP to 192.168.100.88
[#] + [*] + [#] + [9]: Set IP to 192.168.100.89
[#] + [*] + [#] + [0]: Set IP to 192.168.100.80