PUK PohlCon WANDA User manual

Wall duct WANDA
Assembly instruction

1 2
3 4 5
Use a 7 mm open-end spanner to attach
the magnetic holder to the bolts of the
base body using the nuts supplied.
Screw the magnet onto the magnet
holder using the screw supplied.
Tool
For optimum installation of the wall
duct, we recommend the use of:
• Screwdriver/battery-operated
• screwdriver Ruler, open-end spanner
Scope of delivery
The scope of delivery includes:
• Base body with mounting cover
• Cover with magnetic holder and
magnets
Unscrew the mounting cover from the
base body using a Phillips screwdriver.
Flush-wall duct system WANDA consisting of base body, installation devices and covers. The base body, which is already
integrated into the concrete, is 2500 mm long and is supplied with mounting channels and mounting covers. The basic body is
completed on site with two project-specific covers (1250 mm) and freely selectable installation devices.
The following products are required to
complete the system:
• Device carrier for mounting box with
hammerhead screws
• Mounting box
Assembly instruction | Wall duct WANDA 2
PohlCon | PUK
2

6 7 8
910 11
12
Secure the cover to the base body with
a screw. If the cover is mounted offset
on the base body, a new hole (Ø 4.5 mm)
must be drilled in the base body.
Align the cover on the base body and
position it over the magnet.
Insert the customised and connected
mounting box into the device carrier.
Use a slotted screwdriver to make
installation easier.
Fix the device carrier in the rail run
using the nuts and hammerhead screw
supplied
Position the device carrier according to
the use and the cut-outs on the panel.
The hammer-head bolt must be inserted
into the guide at a 90° angle.
To insert the device carrier into the wall
duct, the two hammer-head screws
supplied must be inserted into the
mounting channel.
Assembly instruction | Wall duct WANDA 3
PohlCon | PUK
3

PohlCon GmbH
Nobelstr. 51
12057 Berlin
Germany
T [phone]
F [phone]
www.pohlcon.com
All rights reserved. This document may not be reprinted or electronically reproduced without our prior written permission. The
contents are subject to change without notice. Errors and omissions excepted. The publisher assumes no liability for any reason
whatsoever. This document supersedes all previous documentation.
© PohlCon | PC-LIT-MA-WANDA-EN | 11-2023 | 1. | 11-2023